"Username or password is incorrect" on the iPhone, but work on computer?

Similar Questions

• Failure of the audit on the iPhone, but works in iTunes

  Hello

  I had a strange problem:

  I can log on successfully to my desktop (Windows) by using my AppleID, can see my account balance and buy free apps.

  But I use the same AppleID on my iPhone 6Plus, it always shows: "failure of the audit, your Apple ID or password is incorrect."

  can anyone help?

  Thank you very much.

  Hi all

  After 2 hours of research and new attempts, I finally solved this problem.

  1. just to keep a new attempt on the iPhone, until the account is locked.

  (Note, only the account on the iPhone is locked, can I still use iTunes Windows and web to connect on the same Apple ID]

  2. then follow the instructions on the screen to unlock the account.

  (you will be asked 2 secret questions when the account is set up a few years ago)...

  Once the reset is OK, the same account is included to connect the iPhone and buy apps.  (Yes..!)

  Hope this will be useful.

  kpang1

• "Username or password is incorrect" error message to Win7 logon screen - three systems!

  I have a home network with three machines of Win7. Today, I have introduced the third Win7 and replaced a WinXP machine. All three Win7 machines worked properly for months. Both machines had multiple admin users. We had a user admin added after that the problem appeared.

  There were a few typical network problems - get the machines to be able to access the directories on other machines. Resolved, I'm now faced with this:

  When each machine is turned on, we get a red cirle with a X and this error message: "username or password is incorrect."

  Of course, at this stage no one has tried to put a password yet.

  The system has only one user account. It does not recognize the password. End load Win7, we then close the original user account and access a page of choice of the user account. At this stage the system allows us to choose the account, we, accepts the appropriate password and allows to load the user account.

  To recap. For all three Machines:

  Multiple user accounts

  Choice of user accounts is not made after start

  Error message

  There is only one this user

  After the loading of the AU in first, the system is behaving properly.

  The end of the summary.

  I tried to change user accounts and settings of network without success. Help, please

  Change a user password is trivial for malware or a virus.

  You can use the process below to call for the restoration of the system. This will set Windows (and its password file) back to the selected date:
  System restore
  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with your Windows 7 repair CD.
  3. press a button if you are prompted to start from the DVD.
  4. When prompted, select "Safe Mode Command Prompt".
  5 log in as administrator if you are prompted.
  6. Select repair when prompted.
  7. When you are prompted, select System Restore.
  8. set Windows to a point before this problem occurred.
  9. When finished, remove the CD before restarting the system.
  In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

  A few notes:
  -Rather than do not set a password, you should get Windows to remember your password. The process below allows you to do this.
  -Have a single account is obviously asking for trouble. After you have solved the problem, you must create a second account admin, with a non-empty password and log the details in a safe place.

  Automatic logon
  1. click on start
  2. type the three letters cmd in the search box, and then click OK.
  3. Enter the following command and press ENTER:
  Control userpasswords2
  4. click once your account name.
  5. uncheck the box that requires users to enter a password.
  6. click on OK.
  7. Enter your password when you are prompted.

• Error, says - username or password is incorrect

  OK so today, I was on my account on windows 7 Home premium (I am the only admin on my computer) and I go down to my sister after I try to climb again on but it says my username or password is incorrect, so I try to do different things to arrive as cmd (yes I tried the commands net user) and who have also tried in safe mode but I cannot change help?

  Original title: administrator

  OK so today, I was on my account on windows 7 Edition home premium (I am the only administrator on my computer) and I go down to my sister after I try to climb again on but it says my username or password is incorrect, so I try to do different things to happen like cmd (yes I tried the commands net user) and who have also tried in safe mode but I don't can not change help?

  Try this:

  1. Use your repair Windows CD to start the computer in Windows Repair Mode.
  2. Use system restore to set Windows to a point before your sis woven its evil magic.
  3. Plan ahead a little and create, test, and document an alternative admin account, even though you have a spare House key. This will save you a lot of trouble.

• I finished the installation of Sharepoint 2010 and he is told to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  I finished the installation of Sharepoint 2010 and went through the Setup Wizard. It is said to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepoint2010general/threads

• Restore Microsoft Money backup files it asks for my password I entered and get a message that the password is incorrect. The password entered is correct

  Original title: restore Microsoft Money backup files

  System crashed and had to reinstall Vista. Backup my MS Money files and am now trying to restore. It asks for my password I entered and get a message that the password is incorrect. The password entered is correct. How can I work around this problem and restore my files?

  Hello

  How did you create a backup of these files Microsoft Money?

  Please see the article below which might help you.
  Errors that you receive when you try to open Money by using your Windows Live ID credentials
  http://support.Microsoft.com/kb/891338

  You can also try posting this question in the Microsoft Money forum for assistance.
  http://social.Microsoft.com/forums/en/money/threads

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• iPad flashing constant Air... can't even thug off the coast.  Upgrade the software, but worked for a while.  Can't do anything else.

  iPad constant Air flashing... cannot even turn off.  Upgrade the software, but worked for a while.  Can't do anything now.

  MY husband fixed this problem by pressing power and home buttons.  Duh...

• Failed sending email, username, or password is incorrect

  Hello, I need help please, my internet provider is a business of wholesale telecommunications in the Canada and lately she is dissociated from Microsoft.

  Yesterday, I changed my password by e-mail. Everything is ok with my PC, but not with the iPad. With the iPad, I get emails, but I can't send, I get the message (failed to send e-mail, user name or password is incorrect). I changed the password in the configurations of the iPad, but nothing happens.

  I have tried very hard to find an answer on the net whithout success

  I want to know if I delete my email account only the ipad & reinstall it could solve the problem.

  I speak French and I used a site of translation to write you

  Thanks in advance for your help

  You said that you change the password in the configuration of the ipad, have you also changed the password for your outgoing mail server?

• Username and password required to access the security settings

  I have a HP5520e printer all in one. I'm putting it to scan to my computer. The instructions say I should activate Webscan from the administrator under settings and Security Options. When I try to access the settings of the administrator I wonder a user name and password. Should what username and password I enter here?

  gnomad899,

  Welcome to the HP Forum.

  Start with the standard:

  admin = admin

  password = password (or leave the field blank)

  This assumes, of course, you have not used EWS (built-in web server) and a password for her before - what you CAN do using the integrated Web server.  Once you do not set a password using the EWS page, whenever you want to watch some settings, set some parameters, you must enter the password that you set up.

  EWS is simply the webpage to the printer interface - as if you use a web page to talk to your router software.  Same thing: sort of, except that you type in the IP of the printer on your browser instead of router, of course.

  ============================================================================

  If it won't let you

  You can try to reset the printer.   Be aware that if you do this, you need to re enter all previously entered information (wireless settings, etc.).

  You may be able to reset the printer on the front panel - settings > settings default (or similar).

  OR

  Troubleshooting > troubleshooting > printer keeps no connection Wi-Fi

  Fourth step: reset the printer and wireless router and then restart the computer

  Follow these steps to reset your printer and your wireless router, and then restart your computer.

  

• The user name or password is incorrect after the Hyebernet mode in Vista

  Hello
  Sometimes, but not always, what discharge my laptop Vista machine Hyibernet and wake him up Vista reports that my password is incorrect. I checked if Num/caps lock is engaged and is not. No matter how many times I try to enter the password it is incorrect. The only way to get Windows is stopped - lose all my work - and you log in again.

  Can anyone offer advice on how can I fix?

  Hello Rahul Patil,

  -Did you change on your computer before the show?

  Follow the following troubleshooting methods:

  Method 1:

  Place the computer in a clean boot state, then check if it helps. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  Run System File Check to fix the corrupted system files and then check how it works.

  Check the link 'How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7' to run the System File Check.

  Note: He may request DVDs windows of difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

• Username or password is incorrect. Cannot log on as an administrator.

  I'm a new graduate & used where my boss is usually off site & unable to help me.

  I have laptop a colleague in my office & username & my boss IT gave me a password does not work.  I can't get into the computer at all.

  He wants me to my search answers & figure out on my own, but I hit a wall online.

  Can someone help me to go beyond that, so I can get to the issue that has brought the computer in my office?

  In a domain environment only a domain administrator can reset the user password (and, of course, the owner of the account, provided that it is able to open a session).

• Album artwork are incorrect on the Iphone 6 s

  Since I bought my iphone6s everything has been working great! However in recent weeks my music started to act a little. All the songs I downloaded play perfectly fine, but when I add them to my phone the album art is completely wrong. For example - I would add a Drake song to my phone, and it would fix the Mac Miller album artwork. I tried to remove and re-add the music, but he just chose a different album cover every time. All works of art is quite well in my iTunes as well.

  Any help would be amazing!

  Same question here - but with my iPhone 6. Everything was good for 6 months. But it started a week ago. Album art are perfect in iTunes on my mac. But when I transfer to my iPhone, the new music I load has messed up work.

  Oddly, the cover of the album 'evil' is in alphabetical order of artists. In other words, I tried to add 2 new albums from my mac to my iPhone. On the phone, the work is another artist each time, starting with the letter A. I have delete and try again, same thing, but the "bad" news everytime work comes from a different artist, starting with A. Not that it really matters, but I find it odd that whenever I try, it is a different album art 'wrong' in the artists starting with A. I don't know if I try enough times, I'll get to artists starting with 'B '.

  Very frustrated because I was meticulous about my files of music, names, tags, art, etc.

• Some e-mail comes to the iPhone but not for Mac

  Recently some, but not all, mailed to one of my two email accounts (not account "me.com" but my local ISP) happens on my iPhone but not on my Mac (both devices to the newest OS Help). I see nothing in the settings, system preferences or any other which may explain the problem.

  What this account setup? IMAP? POP?

• How to remove pictures of the iphone but not on icloud?

  Hello, I have an iphone 6 and I have a backup to icloud. I need to free up space on my iphone, I noticed when I delete a photo on my phone its disappear automatically icloud. Is there a way to remove photos from the phone, but keep about icloud?

  Thank you!

  iCloud Libray Photo is not a backup service; It is a synchronization service. Whatever you do a device is synchronized with all other devices, including your computer and iCloud. That's how it was designed to work.

  If you are running out of storage space on your device, choose to use a local library optimized photos. This will dynamically adjust the size of the library based on how much storage is available.

  Otherwise, you will need to disable iCPL and return to the management of your image sync via iTunes.

• How to remove photos from a photo stream on the iPhone, but keep them on Mac?

  Hello world

  I tried to find the answer to my question in the FAQ, but so far I've failed. I'd be really grateful if someone could help me.

  I have an iPhone (5s) and a MacBook Air (13 inch, early 2015). I have not activated the iCloud photo library, but I use the photo gallery on both devices. Because I often take pictures with my phone, I'm running out of memory space on my phone.

  In regards to this and photo stream feature, I have several questions:

  1. If I want to make more room on my iPhone, I have to delete some pictures. Assuming that I do this, these pictures are deleted from my Mac after 30 days?

  2. How can I remove photos from my iPhone without deleting them from my Mac (because I turned on the feature of photo stream)?

  3. If I import the photos from my iPhone in the Photos App on my Mac (when it is connected to my Mac with a USB cable), they are 'safe '?

  I hope that my questions are understandable and I would appreciate all the help I can get.

  Thanks to all and best wishes,

  Lars

  1. no - as long as you have allowed MyPhotoStream to import photos - if they have not been imported yet then they will be gone

  2. after importation of pictures you can delete them from the iPhone, and they will remain in Photos of the moments / pictures

  3 - Yes - but if you import several times, you will have duplicates - you should use USB or PHM import

  LN