Icon of reversal

Similar Questions

• MUTE button and its quick launch icon are reversed

  I think I deleted a driver when I was trying to fix a computer freeze. There was a message I deleted it while my computer may not work correctly, but I did anyway... Oops.

  So now, when my mute button is disabled on the motherboard, and then the audio in the quick launch shows it is not muted and when the mute button is reactivated, then the icon down below shows that it remains silent. So I guess they are reversed but I virtually impossible to get all the sounds work so that never.

  One thing I noticed, is that if I hit the mute button permanently, I can hear bits of sound. It's like I'm sneaking between the functions mute above and below. But of course, I need to function normally if I can watch YouTube with ease, etc..

  So what to do? I tried to reinstall a driver from the windows site, but I couldn't really handle this very well. And my driver installation CD does not work because my CD rom is not working well.

  Hello again triceratops108,

  Thanks for the quick response!

  Based on the information provided in your post, I recommend to uninstall and reinstall the audio driver of your computer. To do this, please follow this document on How to change or remove a program in Windows XP as well as Conexant CX20468-31 AC97 Audio Driver and Audio Driver EQ re - install on your laptop.

  If the problem persists, I recommend reformatting your hard drive and re - install Windows XP or if you choose to do, upgrade to Windows Vista.

  I hope this helps!

• Microphone icon while you talk phone in iWatch is confusing

  Here is a picture I took of my watch while answering a phone call... the icon for the microphone (which was active) looks like is off. If I click the icon, it reverses the colors and then put it on mute the microphone. The icon makes no sense:

  

  Thank you

  Hello

  If you want to share your thoughts with Apple and/or suggest that Apple considers changing the appearance of the button Mute, you can do so here:

  https://www.Apple.com/feedback/watch.html

  (This is a community based on the user - you do talk with Apple here).

• The10.3 Simulator displays icons on the toolbar Action exactly as they are displayed on the device itself

  I found that when I build less than 10.3 and run Simulator 3.0 or 3.1 that display icons in the action bar when VisualStyle is 'brilliant' in black on a grey and not black background on white. This is true if the icon is black on white or white on a black background in a first time, and it is the same for all screen sizes.

  I've attached an example.

  This is how the icons are actuualy on the device or will they be black on white.

  Mark, I just tested my change on all the bright and dark features.

  I was looking through my list of icons and I arrived just to pull the top one on the right... the solution was obvious!

  It is in this context of the specific icons that I had placed on the action bar, which was the question. Icons were reversed, but it is in this context.

  I found a complement to my graphics editor to remove (silimaire value = 0) the background and they displayed as expected.

• Ribbon icon and icon overview do not appear

  Msg edited

  I followed the thread of spookendiesel and articles related but cannot get this to work. No icon appears on the home screen, just the default icons. The app does not throw any exceptions or errors. Everything works as expected, except the icons of reversal and the Ribbon is not displayed.

  My development environment is Eclipse 3.4.2 with Blackberry JDE for the eclipse.

  In summary, I created a 'main' project (RolloverIcon) that displays a screen with the title by a LabelField. This project includes a res folder that contains the overview icon (iconFocus48x36.png). I added the res folder on the way of the construction. I put the properties of the project at the request of CLDC, module system, autorun at startup feature.

  Then, I created a new project in the same workspace called AltEntryRolloverIcon. This project includes a folder that contains the ribbon icon (icon48x36.png), but no code source. I put the project properties of Entry Point of CLDC Application replacement pointed to the RolloverIcon project with the main "gui" argument In the tab "resources" of the properties of the project of Blackberry, I added icon Ribbon as a file icon and made sure its containing folder is on the java build path.

  As far as I know, I followed all directions to implement an icon of overflight and the other entry point. I don't know what else to do. I don't have the skills necessary to interpret the raw project files and to understand the problem. I am including information as much information that I see here in the hope that someone sees something obvious to solve this problem.

  Thanks in advance.

  Here is the source code of the "main" project

  package rollover;
  
  import net.rim.blackberry.api.homescreen.HomeScreen;
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class RolloverIcon extends UiApplication {
  
      public RolloverIcon() {
          LabelField title = new LabelField("RolloverIcon");
          MainScreen screen = new MainScreen();
          screen.setTitle(title);
          pushScreen(screen);
      }
  
      /**
       * @param args
       */
      public static void main(String[] args) {
          if (args != null && args.length > 0 && args[0].equals("gui")) {
              RolloverIcon ri = new RolloverIcon();
              ri.enterEventDispatcher();
          }else{
              Bitmap rolloverIcon = Bitmap.getBitmapResource("iconFocus48x36.png");
              HomeScreen.setRolloverIcon(rolloverIcon,1);
          }
      }
  
  }
  

  RolloverIcon.jad

  Manifest-Version: 1.0
  MIDlet-Version: 1.0
  MIDlet-Jar-Size: 2948
  MicroEdition-Configuration: CLDC-1.1
  MIDlet-Jar-URL: RolloverIcon.jar
  RIM-COD-Module-Dependencies: net_rim_cldc,net_rim_bb_framework_api
  RIM-MIDlet-Flags-2: 0
  RIM-MIDlet-Flags-1: 0
  RIM-COD-Module-Name: RolloverIcon
  RIM-COD-Size: 1372
  MIDlet-Name: RolloverIcon
  RIM-COD-Creation-Time: 1263318798
  MIDlet-2: ,icon48x36.png,gui
  MIDlet-1: ,,
  RIM-COD-URL: RolloverIcon.cod
  RIM-COD-SHA1: 85 6f 21 c3 b3 40 d7 9a 93 cb c7 94 85 35 d8 7a 65 23 45 fc
  MicroEdition-Profile: MIDP-2.0
  MIDlet-Vendor: RolloverIcon Vendor
  

  RolloverIcon.jar

  META-INF/
  META-INF/MANIFEST.MF
  RolloverIcon.cod
  RolloverIcon.csl
  RolloverIcon.cso
  iconFocus48x36.png
  rollover/
  rollover/RolloverIcon.class
  

  Content of RolloverIcon.rapc

  MIDlet-Name: RolloverIcon
  MIDlet-Version: 1.0
  MIDlet-Vendor: RolloverIcon Vendor
  MIDlet-Jar-URL: RolloverIcon.jar
  MIDlet-Jar-Size: 0
  MicroEdition-Profile: MIDP-2.0
  MicroEdition-Configuration: CLDC-1.1
  MIDlet-1: FooRolloverIcon,,
  RIM-MIDlet-Flags-1: 3
  MIDlet-2: ,icon48x36.png,gui
  RIM-MIDlet-Flags-2: 0
  

  AltEntryRolloverIcon.jdp

  ## RIM Java Development Environment
  # RIM Project file
  #
  # This file is generated and managed by BlackBerry developer tools.
  # It SHOULD NOT BE modified manually.
  #
  AddOn=0
  AlwaysBuild=0
  [AlxImports
  ]
  AutoRestart=0
  [ClassProtection
  ]
  [CustomBuildFiles
  ]
  [CustomBuildRules
  ]
  [DefFiles
  ]
  [DependsOn
  ]
  EntryFor=RolloverIcon
  ExcludeFromBuildAll=0
  [Files
  icon48x36.png
  ]
  HaveAlxImports=0
  HaveDefs=0
  HaveImports=0
  [Icons
  icon48x36.png
  ]
  [ImplicitRules
  ]
  [Imports
  ]
  Listing=0
  MidletClass=gui
  Options=-quiet
  OutputFileName=AltEntryRolloverIcon
  [PackageProtection
  ]
  RibbonPosition=0
  [RolloverIcons
  ]
  RunOnStartup=0
  StartupTier=7
  SystemModule=0
  Type=3
  Vendor=RolloverIcon Vendor
  Version=1.0
  

  RolloverIcon.jdp

  ## RIM Java Development Environment
  # RIM Project file
  #
  # This file is generated and managed by BlackBerry developer tools.
  # It SHOULD NOT BE modified manually.
  #
  AddOn=0
  AlwaysBuild=0
  [AlxImports
  ]
  AutoRestart=0
  [ClassProtection
  ]
  [CustomBuildFiles
  ]
  [CustomBuildRules
  ]
  [DefFiles
  ]
  [DependsOn
  ]
  ExcludeFromBuildAll=0
  [Files
  res\iconFocus48x36.png
  src\rollover\RolloverIcon.java
  ]
  HaveAlxImports=0
  HaveDefs=0
  HaveImports=0
  [Icons
  ]
  [ImplicitRules
  ]
  [Imports
  ]
  Listing=0
  Options=-quiet
  OutputFileName=RolloverIcon
  [PackageProtection
  ]
  RibbonPosition=0
  [RolloverIcons
  ]
  RunOnStartup=1
  StartupTier=7
  SystemModule=1
  Title=FooRolloverIcon
  Type=0
  UserData=|src;res
  Vendor=RolloverIcon Vendor
  Version=1.0
  

  Ribbon icon imported into 'hand' of the project folder res and added the following two lines to the main method of the RolloverIcon class. The fixed.

     public static void main(String[] args) {
          if (args != null && args.length > 0 && args[0].equals("gui")) {
              RolloverIcon ri = new RolloverIcon();
              ri.enterEventDispatcher();
          }else{
              Bitmap ribbonIcon = Bitmap.getBitmapResource("icon48x36.png");
              HomeScreen.updateIcon(ribbonIcon,1);
              Bitmap rolloverIcon = Bitmap.getBitmapResource("iconFocus48x36.png");
              HomeScreen.setRolloverIcon(rolloverIcon,1);
          }
      }
  

• A cable is not plugged into the network adapter 'connection to the Local network.

  Hi, I am using a Dell Inspiron E1505... OS: Vista... 32 bit... IE 9... I still use dial-up "Conexant HDA D110 MDC V.92 Modem" connection connected to the internet without any problem... the problem is when I asked someone to download a program "MS Office Home Student & 2010"(acheté le logiciel àle staples)... the person downloading the program via an Ethernet connection on my laptop... "." I never use the Ethernet connection to connect to the internet... Open to the top of my "Network connections" window and noticed my 'connection to the local network' has a red X and says "network cable unplugged"....." "" Broadcom 440 x 10/100 integrated controller. My toolbar in the bottom right of the screen displays an icon of two monitors with a red x as... I have made several attempts to fix using the "Microsoft fix - it Center... didn't help me..." also "diagnose and repair" on my laptop... no positive results... In the window "Network & sharing" "also shows a red X... Please advise... Best regards, John

  Hello

  Reading between the lines a bit here, it is my understanding...

  1. Never use Ethernet, probably because you don't have broadband for some reason any?
  2. Due to the size of the download, you asked someone else to do it with no broadband?
  3. As a result, which is two screens with a red X icon, but never used to be there?

  This icon with the red X is only informative. If you do not use Ethernet then you won't have connected cable, which means that the information you see on "network cable is unplugged" is correct. If you don't like this icon, you can hide...

  • Right-click on an empty part of the taskbar, and then click Properties
  • Click the Notification area
  • You will see a check box for the network, there uncheck and then click OK to hide the icon
  • Reverse this process, if you want to display the icon

  Or is your problem you can connect is no longer with dial upward? If this is the case...

  • Click Start, type inetcpl.cpl and press enter
  • Click the Connections tab
  • 'Never make a connection' values? If this is the case, always select "default connection" (or "Number using whenever a network connection is not present")
  • Click OK

  Tricky

• Transitions does not?

  Anyone know why all of a sudden all the transitions, except to dissolve of the cross, are not available? This is the case in all of my sequences in the project, for all types of files, mov, mts, red, etc.. The small arrow beside those unavailable.

  Thank you

  If the transition has no arrow, it means that it is set to the default transition (cross dissolve).

  If you have any effects in a custom bin, all icons are reversed (arrow).

• Some of the desktop icons have expanded themselves how to reverse this trend?

  Some of the desktop icons have expanded themselves how to reverse this trend?

  The first thing to try is to right click on your desktop > view > click medium icons and see what happens. You can also try small

• How disable (reverse) ui icon, a user interface for the production of coding / engineering mode

  Excuse me

  I'm coding a sample UI on LabView8.2

  full function be activated in the user interface, and engineer can adjust the factors through the UI program

  now, I want to classify the mode of production and engineering for the user interface

  the engineer mode - enable full function of engineering change

  mode of production - only activate a small function for the operator to change

  I hope not coding 2ea program, I hope use example of process to achieve

  so...

  I want to builld a UI for the mode of production

  Have disable (reverse) Labview technic?, let icon convert 'gray'---> disable

  the user can see the icon on the user interface, but they cannot resolve the factors of function

  Thank you

  "2ea program."

  "disable (reverse) technic?", let icon convert 'gray'---> disable

  I don't know what some of the terminology is that you use.  Or what you mean by disabling functions or icons.

  I'm going to guess that you really want to be able to disable and gray to controls on the front panel.  You can write to a property node for each of your orders of façade called 'off '.  You can activate, deactivate and disable/gray.

  

• My desktop icons have gone to where I almost can't see them. How to reverse the fading?

  I noticed it after attempting to show hidden folders.

  Hello

  ·          All the icons are faded?

  The icon's faded because the file is a hidden file.

  Step 1: Follow these steps to display the hidden files and folders.

  a. Open Options files by clicking the Start button, clicking on Control Panel, appearance and personalization, and then clicking folder. Options

  b. click on the view tab.

  c. under Advanced settings, click to clear the files and hidden folders and then click OK.

  See: http://windows.microsoft.com/en-US/windows-vista/Show-hidden-files

• Reversed icons in a sort of classic report?

  Hello
  Using version 4.0.1.00.03 of the Apex:
  When I create a 'classic' of the former report and allow sorting on a column, the arrow on the icon seems
  to point in the opposite direction.
  This caused me to pause, consider this and then do a bit of digging on this forum. Nothing
  relevant found in my limited research, so everyone knows it?
  For example, on a character column, a bottom-up research shows an icon with the arrow pointing down...
  The arrow pointing upwards usually in those cases windows Explorer.
  Curious to hear comments.
  
  Concerning
  
  Mungo

  Hello

  Yes, it seems that Yes. But you can restore the icons of the report attributes

  Kind regards
  Jari

• I accidentley moved the favorite icon menu when I wanted a home so I removed it hoping that would work. It did not work.

  I wanted a Home tab and now I deleted it on accident

  If you have not closed Firefox since this has happened, you may be able to use Undo to revert on your deleted bookmark. Since the cancellation goes in reverse order of last modified, unfortunately it could cancel some things first, but if you want to try...

  Open the Library dialog box help

  • CTRL + SHIFT + b
  • Bookmarks > show all bookmarks

  Click the toolbar bookmarks or Menu bookmarks in the left column, everywhere where the bookmark deleted was. This is so that you can watch to see if it returns when you use Undo.

  And then upward to the left you should see a menu plan. If you do not see text and icons, try the icon that looks like a stack of paper. Here you should find Undo available (not grayed out). If so, you can try it.

  A little luck?

• I pressed "do not ask again" when prompted to access the microphone and camera. IWant to reverse this trend

  I pressed accidentally on 'don't ask' when prompted to access the camera and microphone on a Web site that is crucial for its use. How do I reverse this order? changing the security settings did not help

  Go to the page you want to change the permissions and click the globe icon or the lock to the left of the address. From there, click on the button "additional information". In the window that appears, select the "permissions" tab Then find the camera and microphone access settings and change them to "allow".

• I want to messages with attachments to not be sorted and I want to see the attachment icon

  Please send me information about the display of an attachment icon. I did what you suggested and it did not work. And now, if I get an email with an attachment, I do not see the email - it's buried somewhere in my Inbox. I used to be able to get messages with attachments and they came in chronological order, and there will be an icon of attachment. Can you please help?

  Click on the label to DATE header sort by date. Click on DATE a 2nd time to reverse the sort order.

  This works on any header. Click on the one where he's sort.

  You have the attachment showing column? See the image.

  Otherwise, click the circled icon and add it.

• text for icons cut

  Since the last update to the text that labels the icons in Thunderbird are cut short if they have more than 4 letters (i.e. Pri... for print and DELETE... to delete and so on, and so on.) It does not matter whether or not you add a bunch of spaces, nor is it important if you choose 'Text and icons' or 'icons next to text. I'd love to send you a picture, but the link on this page now works for me to choose a file that shows you what I mean. What is done is the icon of all, but I want to show the icon and text. When you reply to this, to my e-mail included, I'll be happy to join the photo of my problem then.

  So, I suppose that there are two problems to watch you, that where it reduces the number of letters in each word of the Thunderbird icons programs and why the button 'Browse' on this page to request support Mozilla does not. When I mouse over the button it blue gray to a slight gradiation (sp) and when I mouse click, it does not turn a darker with a blue border dark blue with the normal black border. It opens not just a window to select, and then choose the image I want to send you that shows the problem with partial words and icons.

  You gave us Firefox troubleshooting information.
  But I see that you have a user.js (you have you?)
  It can reverse some of your configuration settings.
  I also saw that you have some pop up blocker. That will prevent the Explorer to open when you press "Browse"?

  Run a virus/adware check

  Apparently your Tbird-issue is resolved.