Iconia 6120, double screen. restoration

Similar Questions

• Double screen Enquiry

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  philiom wrote:
  

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  The only upgrade to the video that you can install is a PCI Express x 1 video card with two video.  The card must be a low-profile PCI Express x 1 video card (with 512 MB or less VRAM) that there is no PCI Express x 16 slots on the motherboard. For a card with VRAM than an upgrade of the power supply must be considered as your original power supply is only 180W. Who does not have capacity to a level that will attract a lot of current.

  Best regards
  ERICO

• t5570e double screen RDP?

  Working for a client where I set up a server 2008R2 in RDS mode.  Bought 2 t5570e due to one of the users who need both screens.

  The user one screen, it's obvious: Configure an rdp session at startup; When they turn on the morning, the default standard user connects, starts the rdp session, the user connects as themselves, bingo: Office full win7.  Simple.

  Two screens, but... not so simple.

  So: how to set up the double screen of rdp on the thin client? Do I need a dual video card display in the server?

  Well... that was easy. :-)

  mstsc.exe/span

  Fact. :-)

• T500, double screen, Windows Server 2008 R2

  Hello

  Been looking around, but has not found the solution yet, and I hope that the answer is not NO!

  I have a dual boot of installation, one with W7 with Win2008 Server R2 SP1.

  Under W7, double screen works fine.

  Under Win Server, it shows only the monitor to the laptop, I tried to hook up a monitor to the port-D, VGA, both at the time and one in a tower. Start with VGA connected, start with D-port plugged.

  nothing...

  None of those trial showed Windows I got a second monitor.

  Tried watching pilots, they clam to be up-to-date, tried to install Presentation Director, as I thought, this is not installable on Win server.

  I have the sometihg mist?

  Thanks in advance, if it works, No 4 laptop computer sales will be happy!

  Alexander

  PS: Sorry for the bad English, not my native language

  Finally got hold of 2 laptops, we worked so I grad info on drivers.

  Necessary the Mobile Intel (r) 4 series Express Chipset Family

  Here is the zip file with the installation program:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20602&ProdId=2991&lang=eng

  Extracted, run, restart, worked, made my day!

  Alex

• Card double screen disable integrated video

  I have a question in regards to multiple monitors and Vista.

  I installed a card double screen and sound essentially disabled the on board video screen.  It appears from the documentation, I found that drivers on the double map screen and embedded video are different and must be the same.  I updated the chipset Intel G45/43 built-in monitor drivers, but still no luck I continue to make the same mistake:

  "Incompatible graphics card has been disabled.  At least a card on the system has been disabled because its drivers are not compatible with the VGA card driver".

  According to the documentation, I found the driver WDDM and XPDM drivers must be the same.  What else do I need to update (not to mention that the video driver) to make the onboard graphics still works?  Thank you.

  Hi Paul,.

  You must get in touch with the Intel to get help on this issue.

  Intel support

• Cannot select a native resolution when double screening

  Hello
  Here are the basics. Laptop is a HP Pavilion DV2480se running Vista Home premium 64-bit w / SP2. I have a Samsung Syncmaster 2243 NW LCD screen attached via a VGA cable.

  Since I got the screen (4 months) I was able to double screen with the laptop screen running at its default value of 1280 by 800 pixels and LCD 1680 x 1050 screen (it is wanted to display resolution) by adjusting the parameters via the display settings and/or the NVIDIA Control Panel. I do always disconnect the LCD screen of the portable computer and reconnect without problem. Today, if I plugged it upward and the screen LCD looked funny and when I went to set the resolution in the display settings I can not select 1680 x 1050, nor in the NVIDIA Control Panel. I tried to unplug and reconnect the cable, restart, reinstall the driver, allowing the extra modes on the monitor etc and nothing allows me to get the mode 1680 x 1050.

  I tried to connect to another screen but have the same problem with it.

  Can someone provide advice.

  Hello

  Check with support from Nividia and their forums might be a known issue.

  NVIDIA - drivers - DO NOT USE THE SCANNER she finds often versions older - information entered in manually
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA - Support
  http://www.nvidia.com/page/support.html

  NVIDIA communities (forums)
  http://www.nvidia.com/object/nvidia_zones.html

  You may have to go back to an older driver. Strange that you found has been manually
  older than you. Wonder if the Windows updates or something else installed one
  incorrect driver. Rob - bicycle - Mark Twain said it is good.

• Problem with 5.2 and computer ThinClient view double screen

  Hello

  When I try to use the double screen with Windows 7, PCoIP Protocol and a computer ThinClient Fiju FUTRO S900 (3.8.0) it doesn't.

  The office is just mirrored between the two screen but it is impossible to extend the desktop. I can't change the display settings in Windows and as much as I know there is no GPO that prevent to do.

  When I connect to this virtual machine with View Windows Client it works.

  Any help?

  Thanks in advance.

  OI!

  I found the solution.

  Setting the screen must be configurerd on the display of the computer ThinClient S900 preference.

• W540 - display resolution double screen with cable DVI - D Dual Link

  I recently bought a W540 and connected to my Dell u3011 30 "monitor. I used the Dual Link cable DVI - D that came with the monitor and connected on my Dock Ultra. The maximum resolution I can get is 1920 x 1080? When I pass a display port cable I can achieve complete resolution of 2560 x 1600? Is there something I need to do to get the complete resolution of 2560 x 1600 with dual link DVI - D cable? I want to be able to connect 2 laptops to a normal screen and 1 entrance to port the screen so I need to be able to use the DVI cable on the 2nd machine while allowing resolution 2560 x 1600.

  Port DVI - D on the Ultradock is single link only.

  If you need DVI - D with double bond (i.e. 2560 x 1600) resolution, you need an active displayport to dual binding converter. StarTech makes, they should be about 80 USD or something in this region.

• Can not reduce the brightness or can change the screen resolution to double screen in windows server 2012 R2.

  Hello Experts

  I'm new to this community and please forgive me if I hurt all over.

  Use windows server 2012 R2 on my laptop (previously I was using Windows 7 Home premium), now I cannot able to reduce brightness or can change the resolution of the screen to double (I want to connect my laptop to a bigger screen using VGA cable).

  Everything was fine using Windows 7. But after the installation of the server, I am facing this problem.

  Please help me.

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=winserver8gen

  It will be useful.

• Iconia w4 820 screen project works on extend no duplicate

  If I get only audio, no video. looked at the answer elsewhere on the community and apparently the answer is to download and install update to-pilots. 2 questions:

  1. in the event that I haveto it when my tab is less than 2 weeks?

  2. I can only download intall, the only options I get after downloading to open or save the downloaded files.

  Feeling frustrated as the only reason why I bought this tab should be able to use widi project to my TV to feel disappointed by this product now. Any help gratefully received.

  TYIA

  Hi Billsey, just thought that I let you know that I managed to stir things - the problem wasn't the difference in resolution between the tab and the TV screen I finally got extended work of the screen and the image is very good - not top quality but perfectly watchable for tv catch-up/movies etc.  Just thought I would come to you as you were kind enough to help me and in case it is of use to anyone else having the problem.  The display settings have been set so that the second screen is the main screen, so as soon as I launched widi my the tablet screen went black - still sensitive to the touch but black so in trying to change the settings I was shooting blind - I could see that the TV screen and trying to control it through a black screen.  Ultimately I disconnected projection so that my screen became visible, optimized my touch settings to make my touch screen more visible on a screen projected, re-connected the second screen, and this time, although my screen was black, I was able (after a long while of the violin with her) to restore the settings to see the tab the main screen.  Unfortunately, each solution has its share of problems but as it is essentially a different problem (extended to not duplicate TV screen and TV is no touchscreen and the mouse pointer is not visible on the large TV screen I'm back to blind shooting again) I started a new discussion.  Thanks again for your help.

• Vista hangs at the Welcome screen, restore points have been removed. Any help?

  I've had trouble with this during about a week now. For reference, it seemed to just happen out of the blue - have not installed new drivers or hardware (to my knowledge). In addition, tried a restore a few weeks ago point and seemed to work... once. Now I can't explain it, but all the restore points have been removed too!

  I'm not an expert, but I try to tackle these things and could help. Here's what I've done so far:

  -successfully started in safe mode.
  -Open "msconfig".

  -tried to narrow down the suspects with Services' first.
  -Disabled all "Services".
  -Restarted and restarted successfully.
  -Tried to reactivate Services' one by one.

  -I got to the reactivation of service 'IKE and AuthIP IPsec keying modules' and restarted. Met again hung up on the Vista Welcome screen.
  -Restarted in safe mode.
  -Disabled the "IKE" service... ». Restarted fine.
  -Repeat the re - turn on and off cycle again, has got the hang up once more for good measure.
  -Re-enabled all services except the "IKE" service... "and rebooted fine. Working on the computer now. [Dell Inspiron E1505 Laptop, running Vista SP 2 with 2 GB RAM]

  Did some research on this service and I was wondering if it is an essential service that I should be running (see link below).

  http://TechNet.Microsoft.com/en-us/library/cc733299%28WS.10%29.aspx

  I've saved personal files and try to avoid restarting own Vista, although whereas wiping and running Linux if possible.

  Any help would be greatly appreciated. Thanks in advance!

  Viza,
  I got exactly the same problem on Inspiron 1501 a parent who tried to correct - i.e. problem hanging welcome screen. I have just updated the drivers wireless to the support.dell.com site and have had 3 reboots success in a row, which is 2 more that I could realize by adjusting the parameters of startup using MSCONFIG. Interest how did you decide to update the wireless drivers?

• Z3 double screen negative color

  Hi all

  Z3 double carefully used for 7 days only.

  Now the screen is negative... white...

  Restart and reset tried.still even.

  Help, please

  If her above fails, the I'm sorry to hear that, but you would need to return your device to the place of purchase or contact the Xperia and have your device inspected http://www.sonymobile.com/global-en/support/contact-us/

• Double screen changes when opening a theme program

  A few months ago, I bought a Wacom Cintiq 13HD, and it works perfectly with my Alienware X 51, except that everytime I open a program like Photoshop or Minecraft, both screens flicker black for a few seconds, I have identified as the theme from an aero Basic and then back to aero.

  For those of you who do not know or are confused, my tablet, the Wacom Cintiq 13HD, is a 13-inch tablet that doubles as a second monitor.

  I just updated my Nvidia driver for the last.

  Just before I got my tablet, I bought a 750TI GTX and installed without problem.

  It happens with random programs, for example, it switches themes when I open Photoshop and Minecraft, but not when I open other games such as Assassin's Creed or Skyrim.

  In addition, it starts by changing themes once, then appears the small window of Photoshop (here's what I mean: http://gyazo.com/cb45ba9b922af8ae1927eeb6c63821ae), then it changes to themes before opening Photoshop itself.

  Thank you!

  I apologize in advance if this is in the wrong category, I just couldn't decide.

  What you have identified is a normal behavior. Some programs need to take control exclusive video graphics driver (for performance or compatibility or other reasons), and when this happens, the Manager of Office Windows (WDM) falls in previous video mode called GDI when the office is is more made by the video card but rather calculated by the operating system and printed to the screen.

  The programs themselves need this to work, and if you eagle eyed you sometimes notice a message near the clock in the taskbar.  If you click on this icon, you will see this:

  

• MX700 double screen second screen stays black

  Hello

  I got a brand new double MX700 camera and dual display TC.7.3.1

  When the system starts up, I see the Cisco logo on both screens.

  I made this manual adjustment such that the configuration has been set for a single screen.

  xconfig video monitors: double
  xconfig video CamCtrlPip CallSetup Mode: Off
  xconfig video SelfviewDefault Mode: on
  xconfig video SelfviewDefault OnMonitorRole: second
  xconfig video SelfviewDefault modepleinecran: on

  Now I can see both screen on the touch screen, but the selfview or sharing still not appear on the second screen. It seems to be in standby mode.
   
  Y at - it a command to fix this?
   
  Thank you.
   
   

  You beat me to the punch.  I had the same problem with a MX700 as well.  The Cisco logo at the start means nothing on then the power is on.  This does not mean that it is in talks with the codec what so ever.  Very misleading...

• Double screen does not-version 2015

  Probably simple, but a little weird. Updated until 2015 SG and not my link dual screen does not work, at all. Cannot get to show an image on my second monitor.

  -Connected via hdmi

  -Windows 7

  -Works thanks to dynamic links of PP

  -Double display settings:

  Dual display Output: enabled

  1920 left

  Top 0

  Width 1920

  Height 1080

  
  

  Although it was in 2014, but now, it won't work. Any ideas?

  Just to review...

  The two main numbers are 'related' between the upper-left pixel of your screen "primary" (as defined in the configuration of the Windows operating system for monitors) and your secondary display that will be used to monitor the program out.

  The numbers that you're showing would be for a second monitor to the right of your primary monitor to 1920 x 1080 and the 'level' with her. What is shows Windows or software of your video card when you ask him "show monitors" kind of thing?

  Neil