W540 - display resolution double screen with cable DVI - D Dual Link

Similar Questions

• Impossible to use the DVI - D port with cable DVI - D Pav 500-100 a to HP W2207 monitor

  I have a new standard of factory Pav 500-100a without mods.  HP w2207 monitor.

  Currently properly connect with VGA DVI - D port with the adapter supplied with the pc.  I have install Windows Update 8.1, put in my files from my old PC and everything was fine except the video is not very good.

  I got a formwork of cable DVD, but it's a DVI-I have the cable.  It took 5 minutes before windows comes up and then whenever the background picture changed in the theme which he suspended for a few seconds.  I read that I have a DVD-D need cable which i purchasd today.

  The package says it's a CL-DVI2M - DVI M/M 24 + 1 CABLE 2 M.  The tech in the store said that it is a good calbe and works perfectly.

  When connected and power until I get the hp and rolling points logo, then it turns off.

  I reconnect the cable VGA and all its beautiful - using the VGA to DVI.

  I ran msconfig and turned from secure boot - restarts and comes well in safe mode.  I set the resolution of 1280 x 800 and rebooted and reconnected the cable DVI - Virgin again.

  If I put the cable VGA back inside fine boots.  The monitor was given factory and seens the DVI connection but Windows remains empty. Also tried to start first with no cable - connect the DVI and the monitor remains in sleep - be able to reset the monitor and still a Virgin is also no connection DVO.

  I have fI switch with connected DVI I can get to the BIOS, and I see the HP logo and the points Win 8 starts.

  I don't know what else I can try.  I have no other usable with DVI video card

  Any ideas out there?

  Pls help - Steve

  Although I am an employee of HP, I speak for myself and not for HP.

  Yes, I rasthaus the monitor and cable of my older Compaq running xp and all fine on DVI.  The monitor and cable are fine.

  Since then, I've had a product in Australia specialist help.  Tried all the previous things, then initially went to check if the person had been doing the right thing - connected the VGA monitor with the supplied adapter DVI-d port - which has always worked well.

  Went to Device Manager o and removed the video card adapter. Powered off and then attached the monitor directly with DVI and it started late! Drviers reinstalled and updated and now I have nice crisp clear video appears.

  Something of the support person should apparently have - insead has asked me to wipe the hard drive and restore the factory system, replace the cables, buy a new monitor... was even asked to leave VGA mode and do not use DVI!

  Thank you for your help, Dave, its good to know that you are around to help us.

• Change not anchored to a specific display resolution (HP Zbook15 with adapters dual display)

  My HP Zbook 15 contains both an Intel HD 4600 Graphics and an NVIDIA Quadro K1100M graphics cards. When I remove my laptop it seems to use the Intel card (Intel HD Graphics of icon in the task bar). I think that this display adapter limits the choice of my resolution of screens. I would use a resolution of 1280 x 720 for presentations on the web.

  Anchored with connected screens, it uses the NVIDEA card that offers a wide range of display resolutions.

  Question: Is this possible undocked to switch to the NVIDIA graphics card or add a display resolution of 1280 x 720?

  Thank you

  René

  I could solve it myself by downloading the latest Intel driver from HP's Support web page.

• On occasion while gaming, I get a black screen with "Cable no." WARNING.

  Possible USB problems

  I'm retired and a player.  I play every day.  In may, I started a new game (Diablo 3).  At that time, I also installed a new mouse software.  This is a Logitech M310 wireless and requires a Nano-receiver being connected on a USB port 24/7.

  As I started playing back in may, every 7-10 days while I'm in the game, I experience what I call a black screen of death (as the BSOD).  A moment that I'm in the game, then in the second place, my screen goes black and I see the warning "no cable".  I can still hear the game sounds and music.  No matter what I try, I can't restore the connection of monitor.  CTRL-ALT-DEL to bring up the master may work, but not on the screen.  The only way is down/cold power system restart.  I reboot in safe mode and then restart in normal mode.

  There is a problem in Diablo 3 (D3), it causes 'stretch' or 'video' stuttering.  There is a program in Windows 7 called Ready Boost.  It allows you to insert a flash drive into a USB port, and prepares the drive to let the game use the extra memory of training, may reduce stuttering/stretching.

  I use program flash drive/Ready Boost for about two weeks, now with a flashdrive of 18 GB and a black LAWN known on August 1.  That day I could not recover from the accident and had to take my computer in the store, so they could repair (the computer also let me not use the monitor of my wife so I could understand what was wrong).  Their tech programs could not find no reason for accidents and also could not reproduce them.  There is little to dust in the video card, so they thought it was card gel to prevent burning (but why close the monitor and not the computer, what is true?).

  Got the computer back on August 4 and had another black TURF on Sunday 12 August, where I was able to recover and return to play my games.  Then, on Monday, August 13, there was another which I was also able to recover.  Then, on Monday night, when I turned off the computer for the day, he hung up the shutdown sequence, he showed to the closing screen but could not go beyond and trotted in.  Finally, after about 3-5 minutes, I pulled the plug to turn off it (may not have something to do with it, but seems a bit strange - never had it before).  This morning when I turned on the computer, he began immediately with the black SOD - got the standard WARNING This "wireless".  I tried what I could to recover from the accident but reboot several times (after closing) did not work.  I thought that I had to take the computer back to the store, so (while I still had the computer running and screen always telling me no. cable) I pulled out the 16 GB flash on the USB disk - and immediately, opening (after login) screen was displayed, and everything has worked fine since.

  I tried the D3 Tech and Bug Forums, and it seems that a lot of other players of similar experience black SOD while in the game.  The only thing in all of this that has something in common (on my system, I will go back and see this post in the forums for others) is the port USB/connections.  The new mouse installed in May when I started playing D3, started black SOD (BTW, never had any problems before this date) which requires the nano, the extra flash drive connector, I installed and the display on the screen when I pulled the drive from the USB port.  There is nothing else that is related to the other.  But, I know to look for the cause and deflagrates solving problems and it seems the program/USB connection is the likely suspect, so far.  I wonder if something inside the D3 runs at some point with the USB program?

  I apologize for the long post, but I'm putting everything out there so someone can recognize a problem, I'm not familiar with that.

  I have a generic computer built to my specs, by a local company, 2 years ago.  I am running Win 7 Pro, quad core, 64-bit CPU i7 860 2.8 GHz, not overclocked, 8 GB of RAM and a NVIDIA GTX 295 video card. And as I said, I've never had a problem with this computer until May this year. I have it on all day from 06:00 to 23:00 and have enough fans installed to power a helicopter, and clean the entire system (air jet) every 3-4 weeks.

  I appreciate that you could help me with this.

  Kind regards

  Johnny2

  Most of the black screen errors are related to the video card:
  -Make sure that it gets cooling (that the fan runs and it has not filled with dust/hair/etc.).
  -Make sure that the power cord is firmly in place (and that the card is in place in its housing).
  -Make sure you have the latest drivers from the website of the manufacturer of the video chipset ( http://www.nvidia.com )

  Step 2-update of all drivers on the system, then get all available Windows updates.

  An additional step - if make you it work, immediately put a system restore point.  This does not always work, but it is one of a few patches semi reliable for problems KSoD (Black Screen of Death).

  Make sure you have all the updates for the game.

  Finally, reinstall Windows if all else fails.  Get all the Windows updates available - so make sure you update the drivers from the website of the manufacturer of the device (no Web site of the manufacturer of the PC, no update of Windows with the update function of the driver in Device Manager). Then visit again and again - update Windows until no more updates to date are available.

  If problems persist, try another video card.

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• U2412M DVI - D dual link problem

  Hello, I just bought a HDMI adapter to DVI - D but when I pluged in my monitor U2412M, the power light turned blue, but nothing showed on the screen, when I checked, I saw that the adapter is dual link DVI - D (24-pin) cable that connects my PC with monitor is the only link (18), it is because the cannot connect with U2412M cable dual link DVI - D? Do I have to buy a HDMI adapter single link DVI - D. Thank you in advanced for your answer

  hafinisteam,

  The U2412M only supports resolutions Single Link of 1920. So we provided only the DVI - D Single Link cable. You, you open the OSD (On Screen Display) - Source input and choose DVI - D during the test the:
  computer output HDMI--> HDMI to DVI - D DL--> U2412M DVI - D SL

  Bi-directional cable HDMI to DVI - D SL

• Problem with the display resolution double

  I connect to my laptop to a TV with a VGA cable. The TV has the ability to display up to 1920 x 1080. Normally, my laptop display mode is 1280 x 800. When I connect to the TV as duplicate display my laptop switches to 1024 x 768 and won't let me come back to 1280 x 800. How can I fix this. I need dual extended display or tv only is not an option. I need a way to have my normal screen (1280 x 800) resolution when you are connected to the tv (external monitor).  I know that this is not a problem with the VGA cable because I get a resolution of 1920 x 1080, if I select external display (tv). Thanks for your help! Someone else has a solution for me?

  Hello

  I suggest you to update the video card driver and check if it helps.

  Follow the link below and check if that helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: If the drivers are not updated, I suggest you to download the drivers from the Manufacturer Web site'w and install it then.

• Set the display resolution three screens

  I have a 15 "MacBookPro with Retina display, a Dell 27" inch display and a third 13.9 "BengQ show. The Dell screen works very well with the MacBook and automatically gets the optimal resolution. However, the BenQ is set to 800 * 600, which is much too low. I know that I can change resolution 'by default for view' to 'Chipped', but how I do, the change affects the Dell also, which gives good results. I want to default to the display on the Dell screen and chipped on the BenQ. How do I do that?

  OS X El Capitan: connect multiple monitors to your Mac

• External maximum display resolution of 7520 with AMD Radeon HD M 7730 & Intel HD Graphics Inspiron 4000

  I'll buy a monitor external with a 2560 x 1440 resolution, or even larger. Will be my 7520 Inspiron with the graphics card AMD Radeon HD M 7730 & Intel HD 4000 support that big?

  I heard that the user cannot specify which video card to use. What happens if I connect to an external display that does not support Intel but AMD cards can (suppose AMD adapt can support a higher resolution)?

  Thank you!

  That limit you to 1920 X 1200 on the outside.

• Double screen with two VGA monitors (model Inspiron 620)

  Hello

  I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

  With two displays analog VGA, I wanted to dual monitor.

  My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

  So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

  Currently, I only use one of the two with an analog monitor vga ports.

  I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

  Or is there a method to use both on the desktop vga ports?

  riofunk7,

  You have two options...

  (1) connect both monitors to the ports added discrete video card
  (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
  * Reboot the system
  * Press F2
  * Navigate to Advanced-Graphics Configuration
  * Activate Intel several monitor function
  * Press F10 to save your changes and exit the bios

• Windows displays a black screen with cursor after the installation of updates

  I leave the official updates of Microsoft doing their thing last night before closing and I woke up today to see a black screen greeting me after that I entered my password on the start screen. The only thing that appears is HP Coolsense. No program, no nothing. It's just a wonderful black screen. The world how this issue fixed?

  Hello bean,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver. I suggest you to update the display driver of

  your computer and check if it helps. Please follow these steps:

  a. press the keys Ctrl + Alt + Delete , and then click Task Manager.

  b. click on 'file' and then click on "new task".

  (c) in the immediate window, type explorer.exe , and then click on ok.

  d. Office should appear. Otherwise, in the immediate window, type devmgmt.msc , and then click on ok.

  e. the device manager should open.

  f. expand 'graphics', right click on the display device, click "Update driver software", and

  Follow the on-screen instructions.

  After update display driver, you can correct the screen resolution using the following steps:

  a. right click on the desktop, and then click screen resolution.

  b. in the 'resolution', select the recommended resolution.

  c. click apply and ok.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• View double screen with XP virtual

  I need to know how to set up a display with my virtual Windows XP dual monitor (the virtual XP runs on Windows 7 Professional 64 - bit).  Help, please!

  Using two monitors of the Windows XP Mode virtual machine?  I'm sorry, there is nothing built in Windows XP mode which can do.  The Windows XP virtual machine uses a very basic simulation software video card which does not have this capability, even if the Windows 7 machine has two monitors.

  You can move the entire window of the Windows XP Mode - Windows Virtual PC between monitors, but I don't think that's what you're asking.

  For a few other possibilities, please visit using Virtual PC with multiple monitors, kind of and several monitors with VMs via MaxiVista .  I don't know if they work with Windows 7 and the latest version of Windows Virtual PC, however.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Why Camera Raw displays a blue screen with white cross rather than the image I opened?

  Hello

  I'm having a problem with Adobe 9.0 Raw on my PC. When I open an image in Camera Raw by right-clicking since Adobe Bridge CC, it opens and displays a blue image marine with a white top cross where the image should appear. It happens with all jpeg images, I am trying to open. This problem started only for updating the software via Adobe Creative Cloud 3 days ago.

  Any help on this would be greatly appreciated!

  disable the GPU use in vintages camera interface

• Tool text displays a black screen with strength parameters of GPU

  Hey everybody,

  When I go to use the text tool, I can't go beyond adding a custom project text. A screen example:

  

  I was wondering if someone could reproduce. The steps are:

  • Create a new project by typing '+' in the middle left. (Create all the dimensions.) TAP "OK".
  • TAP, '&,' top-right, and then type, "text".
  • Tap the text input field in the lower left corner.
  • Tap anywhere once fact. You might find yourself with a screen that I have above.

  Tapping on the icon 'back' in Android just me nets a completely black screen and will not leave PS touch as he normally does. I have to use the home screen icon and by sweeping PS touch of my running applications to launch PS touch and make it work properly again.

  I have not tried uninstalling/reinstalling immediately; want to see if someone can repro first.

  Using a Motorola Xoom with Android 4.1.2 (Jelly Bean) and PS button 1.4.1 (Wi - Fi model).

  Post edited by: ibarrien

  Hello

  did you by chance a force on GPU in your development settings?

  Thank you

  Ignacio