Icons are very small and will not return to normal size

Similar Questions

• desktop has been "amplified" and will not return to normal

  When I installed Windows 7 recently I was curious about the "magnifying glass" option in the menu.  I've blown up and then tried to return to normal, but the screen is magnified.  It is said magnification will work in home mode, but somehow it magnified the screen when I pressed it originally (not in home mode) and now I can not return to the State not enlarged.  Any suggestions?  Thank you.

  When I installed Windows 7 recently I was curious about the "magnifying glass" option in the menu.  I've blown up and then tried to return to normal, but the screen is magnified.  It is said magnification will work in home mode, but somehow it magnified the screen when I pressed it originally (not in home mode) and now I can not return to the State not enlarged.  Any suggestions?  Thank you.

  This tutorial allows to disable the magnifying of the start up.
  http://www.SevenForums.com/tutorials/38827-Magnifier-starts-startup-enable-disable.html

• the display windows were smaller and don't return to normal size

  After that my laptop turns off after have overheated, I restarted to find the width of my screen has decreased about one inch on both sides and the duration has decreased about a cm upstairs and downstairs. I tried to reboot several times, but the size of the screen will not go back to normal size! It does not stretch on the sides of the screen, as you normally do, so I don't know how to solve this problem, please help!

  If the information below do not work, contact the manufacturer of the laptop computer, you can have caused damage through overheating:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• After spending about a virus now my PC is in safe mode and will not return to normal. What can I do?

  After downloading an updated version of the Internet Exployer, I received a virus called system tools. It really messed up my laptop. I paid to download a cleaner, but tool systems let me download only in safe mode. Now I can't get my laptop back to normal. In safe mode, printing is so great, that it is difficult to navaigate. Now every time I have open an email or a Web site I get this pop up that says it is a non-secure site and click to run. I want to get rid of this pop up. I have turn turn off my machine and selected normal mode, but when it restarts automatically returns to safe mode. I have done this several times with the same results. Help, please. Thank you, Karen

  Hello

  1st thing to do is to make sure that your computer is completely clean of malware

  What exact process did you remove it?

  Here's the right way to remove it

  change you the malicious software LAN what settings can be changed, then stop the process before the scan with Malwarebytes Anti-Malware

  read this tutorial

  http://www.bleepingcomputer.com/virus-removal/remove-system-tool

  and to change the startup mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.

  1. The System Configuration utility will open and you will see a screen similar to the one below.

  Click the Startup tab.

  1. You will now be on the screen start as shown below options.

     Click the Startup tab.

  2. You will now be on the screen start as shown below options.
  • and under the STARTUP tab, make sure that SAFE BOOT is not checked

• Inkjet Canon iP6600D letters are very small and blurry when I try to print

  I have a Canon Pixma iP6600D

  PROBLEM: I have print letters of Walker are very small and blurred letters

  I read TROUBLESHOOTING without success

  Can someone answer as soon as POSSIBLE?

  See help/support on the Canon Website, for your model, it's not a MS win problem, it's a Canon problem

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip6600d

• Icons are very big and what e-mail reading windows is too large to read.

  My desktop icons are extremely important, and so is my windows email I have hinge performance and personlize a computer. Change the settings I have clicked on 96 and also have to hinge settings and the value 1024 x max settings with no results. What else can I do to fix.

  My desktop icons are extremely important, and so is my windows email I have hinge performance and personlize a computer. Change the settings I have clicked on 96 and also have to hinge settings and the value 1024 x max settings with no results. What else can I do to fix.

  RE: desktop icons too big

  Right-click on an open office space > click View > make your choice... small icons or medium-sized icons.

  RE: too much e-mail

  You have to tell me what mail program you use.
  As Windows Mail, Windows Live Mail, Microsoft Outlook, etc etc.

• Are there improvements for photoshop affect problem of fonts? the fonts are very limited and can not download of new fonts!

  The fonts are very limited and cannot be upgraded. We are looking for the ability to download fonts, maybe google.

  Thank you.

  PS touch is not available more since May. If adobe does more maintenance. They promised a new application with the same functions end of 2015. I've not yet seen.

• Icons become very large and do not match the screen

  My screen keeps going wonky and the image becomes too large for the iPad mini.  I continue to turn it off, and sometimes it returns to normal.  How can I stop this from happening?

  If the screen with zoom in try double-clicking the screen with 3 fingers and see if what he zoomed back - and if it does not define the settings > general > accessibility > Zoom "off". If there isn't a zoom you back off then try triple-click the home button and see if it it shuts off, and if it isn't you can then change what a triple-click via the settings > general > accessibility > accessibility shortcut (or Triple-click home if it is on an older version of iOS).

• My Sony Handycam DCR-TRV950 flashes a yellow icon, C:31:23 and will not record or play.

  A year ago, the camera suddenly started flashing and beeps a yellow icon in the middle of the screen. C:31:23 flashes in the upper right corner above the minutes from the end. The camcorder will not record or play.

  If I remove and reseat or change the battery, and if I remove and reinsert or pass the minidisk, sometimes it'll save or play for a while before the beeps happen again.

  Sunny in Sun Valley

  Try to check the pin of pinch. Open the container of band and you can see the PIN pinch, is a small black roll about 1/4 in. wide and about 1 inch in height, see if she's down on the stem

• Satellite L40 breaks down after 5-10 minutes and will not return

  I hope someone can help

  I have a toshiba Satellite L40. It has not been used for a while, but I need to have stuff on it.
  Put it on yesterday and then crashed after 10 minutes and would not go back
  .the same thing happened today.

  I took out the battery and tried just to power / and vice versa, but no joy.
  I'm not very technical was so had no idea what to try next.

  Hello

  If I understand your question, the unit stopped automatically.
  Such judgment may be related to high temperatures inside the laptop.

  L40 series is a bit old and probably the cooling vents and grilles are obstructed by dust.
  Try to remove the dust using a jet of compressed air. Generally, this lets get removed dust and it helps to keep the temperature low.

  Of course, this procedure would only if the problem is related to high temperatures.
  In the case of the laptop shuts down for other reasons, this workaround would be useless

  You said you need to get something from him in this case you could remove the internal HARD disk and could connect to another laptop computer through SATA to USB controller.

• Google mail is taken offline and will not return.  How to remedy this?

  I have a new MacAir.  I recently updated to the account of Google browser to use as the source for my gmail account.  Since its acquisition last week, he regularly went offline for recovery of emails but reappeared after several minutes (and through procedures online reactive which, so far, have worked) and I can't understand how to bring it back online.  The gmail account and emails are accessible via the web using the gmail account and password that worked in the past, but everything I've tried has failed to download in the Mac Air has not worked since.  Gmail downloads work on all other products Apple, including Mac, iPhone and iPad.  Only the new MacAir is causing problems.

  Messaging uses two servers, a sending server and a receiving server. When you initially configure Apple mail, he pretended that they are the same and tries to use the same credentials for both.

  Sometimes, the problem is only to the sender, or only in the receiver.

  Mail > window > connection doctor...

  ... will show you the status of each independently, so that you can go right tot the source of the problem and fix it by clicking on the red light, as appropriate.

  If you pick up mail on multiple devices (you mentioned an iPhone and iPad) you will want to choose Protocol IMAP rather than pop.

• Acerc720 screen is still very low and will not light

  I have an Acerc720 that has been discontinued (student), and now the screen will not light up. I tried the suggestion of recommended powerwash here and also checked to see if the function keys have been activated (not an easy thing to do with the dark screen). Nothing helps so far.

  Any other suggestions?

  Hello

  Connector to cable/LCD CHEK the EDP as thos:

  1. Unscrew the screws of the bottom
  2. Drop the bottom
  3. Disconnect the battery from the motherboard
  4. Remove the LCD Panel
  5. The LCD connector is located in the Middle under the black ribbon. Check if it is correctly inserted.

  If this doesn't solve your problem, the LCD is faulty.

• Windows Explorer error 0x8007007A: "the data area passed to a system call is too small" and will not accept simple word doc to a new file

  I have seen questions about this error in Re (with no response) Task Manager, but it popped up just for me just trying to move a document to a new file (file) in Windows Explorer.  I'm not a techie.  I use a new Windows 7 laptop, networked with a desktop computer running XP - live files on the XP, so I guess it's an XP issue.  The file tree is quite long. I tried to delete and recreate the folder.  No luck.   New - I got a few word documents in a folder, I created a folder under the original, tried to move word documents & PDF files in the folder and suddenly get this error.  I created thousands of new records - never saw this before.

  The previous times I've seen that error (regarding printer installation issues or Scheduler tasks), if seemed to be linked to a care/firewall Windows. Just to smile, have you tried to disable any software firewall/security (temporarily) and see if that makes a difference.

  BTW, it's a new show (as a few update/install can be causing it) or always happened?

• Mini 210-1091NR wireless network adapter is disabled and will not return to the top.

  For a month every time I receive an update of windows, (and often!) My broadcom wireless adapter arrives as disabled when the computer restarts. Normally I can uninstall the driver and do a reinstall and the wireless will start working again. However after upgrade of the past few weeks, the wireless is not working. I am running windows 7 ultimate and I have no idea what else to try right now. I noticed that the adapter will work always as long I have start in safe mode, but it's not really very good for everyday use.

  Any ideas would be greatly appreciated.

  Thank you!

  OK I found my own solution, or the moment. I deleted the HP wireless assistant and now he connects very well. Must be some sort of inadequate with the windows wireless somehow.

• All of a sudden my buttons for minimized windows are very small and on the right side of the taskbar.

  Is this a permanent change or can I resize and move so I can read what is the window?  Now, there is just a letter or simply as an icon in the window.  I want that the biggest return buttons!  I use Windows Vista Home Premium, 32-bit.  Can you help me?  I watched all the news standard help using the task bar that I can find.

  Hello

  Try a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions