Icons in the task bar disappeared - minimize does not work

Similar Questions

• Icons in the task bar disappeared

  Original title: XP Pro not written Lac program memory information

  After reinstallation of programs or using the Task Manager to stop some sandbox process, then from the programs again to return the status bar icons in the status bar, they disappear after a reboot or shut down and restart. I have a Dell Optiplex GX280, 3.4 GHz with 3 GB of RAM. Two of them are new modules of a GB of quality and the other GB is two older modules of 512 MB. It was an intermittent problem and the tray would sometimes load icons of the toolbar State but now only the clock and running network icons are there after the reboot. I changed the bar of tasks and Menu properties back to try to reset the status bar, but nothing seems to help. A new facility is out of the question with all the security and other updates that need to be reinstalled on this old of a BONE, especially with "dial-up". I just restored a full backup of my external hard drive, but it made no difference. I have a laptop Dell XP Home that works very well. I didn't something different with the XP Pro that I did not go to the laptop.

  Any suggestions would be greatly appreciated.

  Hello

  1. you remember to make changes before the hardware or software problem?

  Test the issue in a new user account and check if the problem persists.

• Windows flashes when scrolling on in the task bar, Alt - Tab does not.

  OK it drives me absolutely crazy. for these past few weeks, my taskbar and alt - tab has been broken. When I move the taskbar of the program im trying to open just blinks but never actually maximizes.  I noticed that it only flashes I have my cursor over the icon. But if I leave it right on it to open its own it never made. Alt - Tab is also the exact same thing (which makes me assume that the question is related.) I click on buttons and pop-up windows, but does not open anything.

  I looked around and I know that this question emerged with a reliablitiy of windows there are few up-to-date kb977074, but wasn't in my update list. SO I now have no idea what to do. Ive played around with the parameters monitored for defective or damaged files, and really, I don't want to have to do a system restore. especially since ive restored my computer and he was doing it before I updated. so... ideas would be very appreciated.

  Thanks in advance :)

  Hello

  Welcome to Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You have installed all the programs, application or updated before the show?
  2. How did you check the defective or damaged your system files?
  3. Do you receive an error message or error code while using the taskbar?

  Try it out below mentioned methods and see if it works for you.

  Method 1

  Try to perform a full scan of your computer using Security Microsoft Scanner.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2

  If the problem persists, I suggest to check the integrity of the system and for this you may need to run the SFC (System File Checker).

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope it would help. If problem persists always post back with the current state of your computer, the information required and the result of proposed suggestion, we will be happy to help you.

  Thank you.

• The URL bar AutoComplete feature does not work correctly, does anyone else have this problem?

  I was running version 9.x and had this problem, so I've just updated to 11 of Firefox, but it does not help.

  The problem is that the URL bar doesn't let me type a new address in some cases - preferring instead to refer to a previously visited address. It would be better if I gave an example:

  I'm trying to access a site, that I have not visited, for example holden.com.au

  I type 'h', and the URL bar suggests that I go to my Hotmail login page (the URL for that starts by of ') and the rest of the extreme Auto (so now I'm in the situation where I have an address in the bar from '). This means that I can not continue to enter the address provided.

  Can it be fixed or is it just a question for me?

  I solved this problem by going to: setting up and activating/deactivating the browser.urlbar.autoFill layout. I think the default setting has been changed in a recent update.

• The battery icon on the task bar disappeared

  the battery icon has disappeared off the coast of the taskbar. I can not turn it back as the place under the "behaviours" is grayed out. More simple instructions to fix it please.

  Thank you for your help. I printed these tips for later use.

  My icon suddenly reappeared.
  Thanks again

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The shortcut Ctrl + Alt + C does not work in InDesign CS6.

  The shortcut Ctrl + Alt + C does not work in InDesign CS6. I don't have an ATI video card, the shortcut key is not related to the center of catalyst.

  I have a Nvidia GeForce GTX 980 video card and I reinstalled Windows 7 x 64 three weeks ago. Since then, the shortcut Ctrl + Alt + C does not work.

  I tried to reinstall the program. I tried to clean the preferences file. Yet, nothing is done. I googled if there other programs that could take the shortcut for themselves. The InDesign menu says that the Ctrl + Alt + C is linked to the action "was". But nothing happens.

  If you have any suggestions on what do I do to fix this, please help.

  P.S.: before the reinstall, everything works great.

  ---

  MB: ASUS P8Z77-V Deluxe

  CPU: Intel® Core™ i7-3770 3.4 GHz

  GPU: NVIDIA GeForce GTX 980

  But no. I think I thought it somehow.

  I just reinstalled the CS6 InDesign from scratch, as stated in the above post. Just as new as possible. And he was always in trouble. Then I disabled the two automatic startup items:

  Broadcom 802.11 Network adapter wireless Tray Applet

  and

  Driver Logitech SetPoint.

  After that, everything is back to normal.

  I guess that one of them had caught the hotkey without mentioning, so that should be the fault. I don't think that other programs (with the exception of Adobe) have the same key as InDesign links.

  P.S.: Just restarted each disabled program and it's Broadcom 802.11 Network adapter Wireless Network Tray Applet that shows problems with the keys.

  So, thanks for trying to help me solve my problem.

  If anyone else has trouble with the keys and they have this specific bin running applet, better turn it off to be sure. In the Windows Task Manager, it is called C:\WINDOWS\SYSTEM32\WLTRAY. EXE.

• loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Question
  get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Ah, quite understand now that I added to my doc html

  < style type = "text/css" >
  {body
  background-color: #FFF;
  }
  "'object {outline: none ;}"} '

  < / style >

• After the 9.3 Safari browser does not work on my iPhone 6 s.

  After the 9.3 Safari browser does not work on my iPhone 6 s. Any solution to this bug? I've been trying different menthods as the incognito but still the same. He was great before working. And now, when I tap on the link of the application crashes.

  It is a known issue and Apple is working on a fix. This article summarizes some of the problems with the current version. To disable Javascript in Safari, but this sacrifice functionality with the web browser.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• My internal camera on my MacBook at the beginning of 2008 Pro does not work

  My internal camera on my MacBook at the beginning of 2008 Pro does not work.

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.3

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• problem with scroll - the touchpad on my laptop does not work as it should.

  When I open anthing the page down to the bottom and I can't scroll to the top. I have to press the up button the page upward and sometimes that doesn't work. What ca I do t get it working again? The touchpad on my laptop does not work as it should. I should be able to press on and get my finger upwards or downwards and have the page up or dwn and this isn't. Please can you help me with this?

  In Winupdate settings provide "recommended updates" is disabled. (Allow the important updates)

  Go to your laptop manufacturers site, reinstall the touchpad drivers and graphics drivers

• The side-by-side function does not work correctly, windows overlap

  original title: sizing windows side-by-side

  The side-by-side function does not work correctly, windows overlap.  How do fix you this feature?

  Hello

  It is Aero Snap.  When you select a window how you "cutting" it in position?  You do not use the window key and the arrow left/right or are you drag / drop window?  If you drag / drop, using the keyboard shortcuts help to solve the problem?

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you