ID-more security with phone number in option

Similar Questions

• contact sos watch OS 3 (with phone number) in gray

  I try to add a few contacts to my list of SOS watch OS 3:

  I can't add my father because he's gray, even if he has 2 phone numbers and an e-mail on his card.

  I understand that contacts with phone number appears in White gloss and those without should be grayed out, but this isn't the case here...

  Only those who can receive a text are those that will be displayed. What happens after the SOS call, a text will be sent to the people you have selected, up to 3. On SOS on Apple Watch - Apple Support

  If you look at the screenshot of the contacts, he says he delivers a message.

• warnings of virus with phone number

  bring up of virus warnings and phone number to call. perform navigation.

  Force Quit Safari, and then reopen with shift prevent the opening of permeable open windows.

  If you don't call or click n anything everything is fine

  Phony 'technical support' / 'ransomware' popups and web pages

• PIM makes contact with phone number?

  Hi guys,.

  I'm tring to recover contacts devices and I did get all the data but I can not get the phone number

  bb::pim::contacts::ContactService *service = new bb::pim::contacts::ContactService();
  bb::pim::contacts::ContactListFilters filters;
  filters.setLimit(0);
  List contacts = service>contacts(filters);
       for(int i=0 ; i < contacts.size() ; i++)
       {
  
           qDebug()<<"firstName<"<			 
  The problem was, I have to get contact with contactID
  const Contact contact = service->contactDetails(contacts.at(0).id());
  qDebug()<<"firstName"<		   

• Feature Request: more properties with check boxes and option buttons

  If you insert a radio button on a Web site, the pallete property inspector (right of expression? in German it is called "Akbulak") should provide checkboxes to 'disable', 'read only' 'access key' and a little more.
  This properties can be defined in the code manually, but not in the palette.

  WebZopp wrote:
  > If you insert a radio button on a Web site, the pallete property inspector
  > (right of expression? in German it is called "Akbulak") should offer
  > checkboxes for 'disable', 'read only' 'access key' and a little more.
  > This properties can be defined in the code manually, but not in the palette.

  I agree that it is a very sensible suggestion. (The correct name in)
  English, by the way, is the property inspector). Since it is a
  User Forum, your feature request is not likely to be seen by the
  good people at Adobe. Use the request/Bug report form to do a
  official request. Most people who make requests through the agent
  form, most likely Adobe is aware.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  --
  Adobe Community Expert David Powers
  Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• How to access a JSON structure key that starts with a number

  I have a strange problem here.  I can access any other JSON structure so I am not able to change it.  The JSON structure keys are named with the characters and numbers like this:

  0	198456
  product_id	198456
  1	Feat Rashaan Houston Tony Loreto
  artist	Feat Rashaan Houston Tony Loreto

  So, in other words, there is a key named "0" and a key named "product_id", containing the same key.  Why they did it, I don't know, but they did.

  In one case, the data stored under the key name text is not identical to the digital key named.  I tried to view the data in the digital key like this (it is an array of structures):

  #strStompyJSON.data [1].0 #.

  but I get the following error:

  --

  Found no valid CFML building online 41 in column 31.

  ColdFusion has been looking at the following:

  .0

  --

  When I do the following, it works fine:

  #strStompyJSON.data [1] .product_id #.

  So, it seems that CF does not like to access a variable that begins with a number.  I am able to perform a loop on the structure by using a loop of the collection, and it shows all the keys (including digital) and their values using the following code:

  < cfloop collection = "#strStompyJSON.data [1] # ' item 'key' = > '"
  #key #: #strStompyJSON.data [1] [key] # < br / >
  < / cfloop >

  However, that does not allow me to access specific keys named with a number.  Is it possible that I can access a key that is named more precisely with a number?

  Thank you!

  Mike

  Have you tried the support rating that I proposed in my first answer?  In my tests with your code, it worked without problem.

  Thank you

• Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  For Apple ID - Apple Support two-factor authentication

  If I can not connect, how I again to access my account?

  If you can't sign in, reset your password, or receive verification codes, you can account recovery application to restore access to your account. Account recovery is an automatic process designed to help you back into your account as soon as possible while denying access to anyone who might be impersonating you. It may take a few days - or more - depending on the specific account information, you provide to verify your identity.

  It will be your option. If you try to find an iPhone with locking Activation that you don't remember the password, you can remove the account from the iPhone with the help of Apple's Support with the receipt of the initial purchase of the iPhone as a way to prove that you are the real owner of this iPhone.

• Phone number not an option for iMessage on iPad mini

  Hello

  So my ID Apple was recently hacked and had to change my password on all my devices (iPhone 6 and mini iPad). But now that I changed, my iMessage works well for my iPhone, but on my iPad, I have no option to choose my phone number. I tried to reset iMessage, reset my iPad, everything. Now I'm curious to know why, that's happened what else I can do for an option again.

  Thanks in advance for helping me!

  To go through all these steps?

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

• Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one, with in a few months.

  Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one in a few months.

  You may lose everything.  iMessage, like most e-mail services, don't keep permanently undeliverable messages.  They only keep in the short period send queue (I don't know exactly how much time but some Apple tech sites indicate no more than 10 days to two weeks) until they are purged.  That's pretty standard as otherwise, large volume, messaging services would be sitting on tera-bytes of messages not delivered each month.

  You actually have to change my phone number?  If not, let alone sign and only in iMessage when you have the new phone with this set of numbers upward to the service.

• Create account Skype with Skype name other than that of email or phone number

  I was asked to create a new Skype name for the work, but I can't understand how to create an account with a Skype name that isn't my email or phone number. I don't see an option where you can type your name (not the visible display to my contacts name) Skype.

  You can create a new Skype account with a Skype name of your choice using this form:

  https://login.Skype.com/registration

• I changed my phone number, but I can't update the 'ACCESSIBLE AT' number on my Apple ID account Please can someone explain how I can change the number of 'ACCESSIBLE AT', to update my account with my new number?   Thank you.

  I changed my phone number, but I can't update the 'ACCESSIBLE AT' number on my Apple ID account Please can someone explain how I can change the number of 'ACCESSIBLE AT', to update my account with my new number?

  Thank you.

  Try going into settings > FaceTime and turn off FaceTime. Then go to Messages and turn off iMessage.

  Turn off your phone and then new.

  RETURN to FaceTime and turn it on again, even with iMessage. He has to try to reactivate and your new number should appear (you can see this more down in the addresses to send & receive). You may need to log into your Apple ID for this operation.

• User limit hits 50, but 5505 is certified with more security

  I have an ASA 5505 that gives me the error of usage limit, but I allowed it for more security.  My understanding is that licensed up to unlimited hosts inside?  I am not mistaken?  If this is not the case, how to recognize the unlimited hosts inside?

  Here is my result to see the Version:

  The devices allowed for this platform:
  The maximum physical Interfaces: 8
  VLAN: 20, unrestricted DMZ
  Internal hosts: 50
  Failover: Active / standby
  VPN - A: enabled
  VPN-3DES-AES: enabled
  SSL VPN peers: 2
  The VPN peers total: 25
  Two Internet service providers: enabled
  VLAN Trunk Ports: 8
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5505 Security Plus license.

  Serial number: XXXXXXX
  Activation key running: 0 x
  Registry configuration is 0x1
  Configuration has not been changed since the last system restart

  Any thoughts appreciated.

  Thank you!

  On the 5505 Security Plus does not unlimited number of users. See the table here for a comparison of what offers basic vs Security Plus.

  The upgrade of 50 unlimited users on a 5505 requires the part number L-ASA5505-50-UL =

• Y at - it an application that I can use to send SMS to a mobile phone number to a number of mobile with my PC?

  I know that there a program out there for this because I use this on a laptop HP with Windows Xp I have a windows xp, 7, 8, and a windows mobile 6.1 phone computers. I was wondering if there is an app that has the text of your current phone number to any other phone number. I don't have Outlook office licenses more so I can't use add it on for this. Help, please.

  
  RYES
  Original title: PC Texting

  I binged it and found this...

  -http://www.textem.net/login.php?-
  Thank you for helping me,
  RYES

• Validate / Format of phone number with Extension

  I am trying to allow users to enter a phone number, with the POSSIBILITY of adding an extension at the end, but I can't seem to get the good coding...

  Thus, users should be able to type the following:

  5555555555

  555-555-5555.

  (555)555-5555

  555-555-5555

  As well as

  55555555551234

  1234 5555555555

  555 555 5555 1234

  555-555-5555 1234

  And they should all validate/format:

  555-555-5555 ext (number of optional expansion)

  5 years and 1234 s are only examples.

  I tried to use a mask of arbitrary, but you are unable to view OPTIONAL characters method... they want to all be necessary therefor 9999999999 ext9999 eventually REQUIRE a 4-digit extension.

  Thanks in advnace for your help

  It can be done using a custom size validation script.

• I bought an iPhone 6s online and it is locked with a number passcode.is there anyway I can bypass it and set up my new phone?

  I bought an iPhone 6s online and it is locked with a number passcode.is there anyway I can bypass it and set up my new phone?

  No, better return you it for a full refund.

  Without the password, you have a brick.