ID of the error event 1209 on vCenter Server

Similar Questions

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• How to change the MOB OpenManage integration for vCenter Server registration

  A few months back, I've updated our installation of the vCenter for v2 plugin, now called OpenManage integration for vCenter Server. When you perform the upgrade, we have kept the old base done vs a new installation. During the upgrade process, we deployed the new device under a new name of the computer.

  Everything works well except that we noticed an annoying thing. Registration of the plugin is the former name of the server instead of the name of the new server-oriented. It is validated by looking at the web page MOB: http://vcenter Server/fmt drilling then down through:

  Content--> Extension Manager--> extensionList ["com.dell.plugin.OpenManage_Integration_for_VMware_vCenter"] --> server--> URL string

  The configuration of the appliamnce shows the correct new name of the device and the administration console is accessible via the new name for the device. The only place where we see the old name of the device is in the MOB config.

  We tried to remove the plugin and added, but still cannot change the value of server URL to reflect the new name of the device. Until we solve this problem, I work around the problem by keeping just the DNS entry for the old name of the server in DNS.

  Anyone know who to change the property MOB for the URL of the server?

  I solved the problem.

  I found the following article that shows how to upgrade the extension. I just cut and paste into my current values with the URL of update and now all is good.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2060127&sliceId=1&docTypeID=DT_KB_1_1&dialogID=236869583&StateID=0%200%20236885165

• The error event: event ID

  Event type: error
  Event source: .NET Runtime Optimization Service
  Event category: no
  Event ID: 1103
  Date: 06/05/2014
  Time: 12:42:32
  User: n/a
  Computing: x
  Description:
  .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - tried to start a service that is not the latest version of the CLR optimization service. Stops

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  http://community.Spiceworks.com/windows_event/show/4065-NET-runtime-optimization-service-1103

  read the thread above

• My computer is freezing. The error event 41

  My computer is freezing (no mouse movement, keyboard, if her cheek it will turn into a buzz).  I looked in the event viewer and event ID 41.  I replaced my HD, video card and the same error occurs.  I ran memtest for a cycle, and there are no errors.  I installed windows on a hard disk of expenses and it would freeze during the installation of windows.  I'm fine in safe mode.  I tried to disable all services except those from microsoft and once outta safe mode, I always freeze.  I can hardly believe his material since im fine in safe mode, but honestly im just lost and have no idea what to do next.   Help :(

  Hello, Sam.

  First of all, I apologize for the delay in get you the help you need to staff of Microsoft Answers.

  Scroll through the ID of the event 6 comments and determine which applies in your case

  Please do the same with the 12 event ID

  All the drivers are up to date?

  Have you added new software recently that could have caused this problem?

  Is that what you have installed all service packs?

  Check the comments here about the event ID 41

  Unplug the peripherals, printers, usb, camera, etc...  The gel continue?

  Perform a clean boot. ... The question continue?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• When I installed the web client vsphere using vcenter server iso, encounted an error that the vcenter server signon administrateu use name and password is invalid

  VCenter server is version 5.1 and this server is a member of the working group.

  It comes to my administrator:

  

  So, I used ISO server vcenter and installed web client pulg-in vsphere, it prompted:

  I've used many ways, but failed.

  usernme:admin@system-domain,

  so, I do not know how to solve, and I only know this administrator password.

  I'm not vCenter sign the only to have another admin, please help.

  

  and another question: how install and configure the data via the vsphere 5.1 customer protection, vsphere isn't vsphere web client.

  You must provide credentials for the user admin@system-domain.

• Installation of the error on Vista WPS54G printer server

  • Properly installed on XP but on my Vista computer I get message "Set printer Fail. Error Code # 87 "wheninstalling print server driver.

  Try this-

  Open the control panel in Vista and open the "Printers" folder Click on "Add a printer" and at the prompt, click "add a local printer. In the next screen, click "create a new port". On the line 'Type of the Port', use drop down the menu and select "Standard TCP/IP Port" and click Next.

  Under "Device Type" use drop down the menu and select "TCP/IP device. The host name or the IP address for this device will be the address assigned in the tab Protocol on the administration web page. Click on the box that will allow the o/s query the printer for the correct driver and click "next".

  The 'Additional Port descriptive' screen should open. Click on "Custom", then "settings". Protocol = LPR and LPR parameters are: name of the queue = LP1 and check on "LPR Byte counting enabled." 'Active SNMP state' let off. Click here to return to the "additional Port Information.

  Install the printer driver for your printer. Select your manufacturer and model from the list provided and click "Next"... If your printer is already installed, click the button to use the driver already installed. Click on 'Next' and assign a unique name to your wireless print server. Once you are done right click on your printer icon and choose the option "use printer online". Print your Test Page... I hope this helps.

• Want to take the certification VCP6-VTC, but I finished the 5.5 ESXi and vCenter Server 5.5

  Hello

  2 years ago I had the training for 5.5 ESXi and vCenter Server 5.5 - I wonder if that would satisfy the requirement and allows me to pass the exam VCP6-VTC?  Or should I stick with the VTC VCDP5 only?

  Have you taken after school.

  5.5 vSphere install, configure and manage.

  If so, please attend vSphere: what's new [5.5 to 6.0]

  It is a 2 day course that will allow you to take the exam VCP6-VTC.

  Otherwise, take VCP550 review and upgrade to VCP6-VTC in taking 2V0 - 621D.

  Pleaes see following URLs too.

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www_cert&TRK=profile_certification_title

  VCP6-VTC Certification

• iSCSI storage presented to the hosts managed by different vCenter Server - questions?

  I currently have three hosts (esxi 5.0) that are managed by vcenter server 5.5 U2. The hosts are attached to iSCSI LUNS (data warehouses) 10.

  I'm migrating to esxi 6.0 U2. For this, there are three new hosts have esxi 6.0 installed and managed by vcenter server 6.0 U2 U2.

  The plan is to detach/remove 5.0 5.5 U2 vcenter esxi hosts. Then import it into vcenter 6.0 U2 (a new cluster will be created). Once imported, uninstall the 5.5 vcenter u2. Then turn off the resident VMs imported esxi 5 hosts and move them to 6.0 esxi hosts.

  My query is regarding regarding storage.

  At present, three new guests see all storage the old 5.0 esxi hosts to see (guests are not in the cluster. "I'm still trying to put things up). That's because the new hosts were deposited to the same group on the side iSCSI initiator storage. Now things, data warehouses are visible by the hosts with esxi 5.0 (managed by vcenter 5.5 u2) and also the esxi hosts 6.0 (managed by vcenter 6.0 u2). The only VMs residing in esxi environment 6 is vcenter 6.0 u2 and update manager 6.0 u2. These are in a data store that is not any other virtual machines.

  That's no problem during the migration? I have not created a cluster for the esxi 6.0 hosts yet and plan to do after obtaining your entries.

  Thank you!

  No problem whatsoever, regardless whether if you do or that you add no vSphere 6 hosts in a HA cluster.

  If you temporarily enable EVC on the vSphere hosts 6, once all hosts are connected to the same vCenter you can VMotion all VMs to new hosts even without any stop. Clear CVS once the migration is complete.

• The active alarm set in Vcenter server

  Hello

  I'm looking for a script that displays the list of active alarm set description in vcenter server. Thank you

  PFA.

  Thank you

  vmk2014

  Oops, the value has been abandoned in the copy/paste, I'm afraid.

  I corrected it in the code above, give him another chance

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• [HELP] SMV disappeared after restart of the host - 5.5 ESXI, Vcenter Server to the same host

  I restarted the ESXI using classic Vsphere Client. Now, all virtual machines have disappeared. I tried to connect with Vsphere Client and workstation and the list is empty. I can't access the Vcenter server since it is a virtual machine that resides in the home.

  The data store is a local disk. The data store is still there and the amount of disk space used is correct. I don't see the virtual machines in the inventory. I have re-installed ESXI 5.5, refreshed of store data and what not, there is nothing there. I am freaking out and don't know what to do.

  EDIT: I am able to navigate the data store manually by creating the new virtual machine and select the existing virtual machine following this guide but I'm not sure what is the reason for which the files would be missing or corrupt

  http://techhead.co/VMware-ESX-how-to-easily-recreate-a-missing-or-corrupt-vmx-file/

  When you browse the data store you see the virtual machine and their records?

  If you see the virtual computer files, you can open the folder, right click on the .vmx file and select Add to the inventory. who will get your VM in the inventory.

• Error connecting to VMware Vcenter Server

  I can't connect to my server vcenter using vcenter client 4. This just started happening, and I've not updated the server. Message received; "vshpere client could not connect with the vcenter server Details: a connection failure has occurred (unable to connect to the remote server)."

  THX.

  See in the newspapers.

  VDB::getConnection Cannot get a connection: HY000:-2146893044

  VDB::getConnection Cannot get a connection: HY000:-2146893044

  VDB::getConnection Cannot get a connection: HY000:-2146893044

  VDB::getConnection Cannot get a connection: HY000:-2146893044

  VDB::getConnection Cannot get a connection: HY000:-2146893044

  VDB::getConnection Cannot get a connection: HY000:-2146893044

  Cannot get a connection of database for the last 1800 seconds. Please ensure that the database server is in place and is accessible

  Win32 exception: Access Violation (0xc0000005)

  odbc connection again to start and test the database connection.  It connects properly?

• Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

  Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

  Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxext.exe-integration

  Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxsrvc.exe-integration

  I think they are Intel drivers, but have failed to find a cure for this problem.
  Other than a real slow start it seems no problem.
  Am that I the only one having this problem and everyone know the cure?

  So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

  Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

  Greetings

• The error event alert

  Hello

  I create an event alert in Apps R12, Test instance, the requirement is to trigger a concurrent request when a row is inserted into the pay_payroll_actions table.

  In the alert window even under the responsibility of the Alert Manager > when I click on the button check or run button, an error message appears and I have to restart my session again.

  Error is:

  FRM-92101: there was a failure in the Forms Server during startup.

  This could happen because of invalid configuration.

  Please look in the log file of the web server for more details.

  Please suggest.

  Kind regards

  Afzal.

  Assalamu Alaikum Afzal,

  This seems to be a known bug,

  Please apply the patch on a test environment and let us know if it helps you:

  Review rating:

  The button check fails under Alert Manager / Define shape with FRM-92101 (Doc ID 1537468.1)

  Thank you &

  Best regards