My computer is freezing. The error event 41

Similar Questions

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

  After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

  Hello

  Some research suggests that ProfileCnt.exe belongs to a wireless card or

  Ethernet card.

  Work using the boot minimum troubleshooting to identify the troublesome program,

  then uninstall/reinstall this program.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

  What program is involved.

  Don

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• Try installing Adobe Indesign CS5.5 on a new computer and get the error message "setup initialization failed.  Please download Adobe Support Advisor to detect the problem.    Adobe support advisor is is no longer available.  What should I do now?

  Try installing Adobe Indesign CS5.5 on a new computer and get the error message "setup initialization failed.  Please download Adobe Support Advisor to detect the problem.    Adobe support advisor is is no longer available.  What should I do now?

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

• The error event: event ID

  Event type: error
  Event source: .NET Runtime Optimization Service
  Event category: no
  Event ID: 1103
  Date: 06/05/2014
  Time: 12:42:32
  User: n/a
  Computing: x
  Description:
  .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - tried to start a service that is not the latest version of the CLR optimization service. Stops

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  http://community.Spiceworks.com/windows_event/show/4065-NET-runtime-optimization-service-1103

  read the thread above

• Not able to start computer to Windows VIsta: error event critical ID 10

  Original title: Critical Error Event ID 10

  Yesterday my office started to show a very serious mistake. The symptoms are:

  * On the Dell splash screen, there are tiny dots blue/purple (hard to tell) on the entire screen.
  * If I allow him to continue to boot normally, it will pass through the screen with the little bar at the bottom of the screen, then it will go black and not change again. I have to make a hard stop.
  * If I hit F2 or F12 (menus on the start sequence), first black screen covered with symbols of the dollar ($) rises. The menu right then there is upward, except that it's full of spelling mistakes, signs and random symbols replacing letters and scattered everywhere.
  * I changed the boot sequence to boot from the optical drive first and booted from the Vista disc came with my computer. The screen "Press any key to start from the CD-ROM or DVD" was also covered with dollar signs. From there on, I was able to get the Startup Repair menu. Nothing could be resolved here.
  I managed to get into Safe Mode and view the event log. The only recurring error event that corresponds to the period is:
  Source: WMI
  Event ID: 10
  Task category: no
  General: Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60.

  WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage
  > 99 "could not be reactivated in namespace '//./root/CIMV2' due to
  error 0 x 80041003. Events cannot be delivered through this filter until the
  problem is solved.

  Details (XML):

  
  GUID = "{1edeee53-0afe-4609-b846-d8c0b2075b1f}" = 'WinMgmt' EventSourceName / >

  10

  0

  2

  0

  0

  0 x 80000000000000

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE
  TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage >
  99

  0 x 80041003

  Here are my specs:
  Model: Dell XPS 630I
  OS: Vista Edition Home Premium SP2 x 32
  Processor: Intel Core 2 Quad Q6600 @2. 40 GHz
  RAM: 4 GB
  Someone at - it suggestions?

  Yes, funny thing. Computer fixed now, but I don't know why. I've done one or two things in quick succession without trying a boot between them, so something has resolved, but I don't know what.

  The chkdsk says that it remove a bunch of files, so maybe that's her. I cleaned all the dust from inside, so that may have contributed. I also disconnected and then reconnected the graphics card (a big ' ole dedicated NVIDIA one), what could be the fixer as well.
  I'm inclined to think it's the graphics, since, as I mentioned above, my old laptop was showing similar symptoms when its GPU went wrong.
  So yes, the problem is solved. If all goes well at all times. Mods, feel free to close this topic.

• When I start my computer I have the error message: "failed to connect to A Windows Service.

  A few days ago, I received this message by turning on my laptop:

  "Could not connect to a Windows Service - Windows cannot connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  However, when I go in the view of the event log, the "Event Viewer" window opens and I get this error message:

  "The event log Service is unavailable. Check that the service is running. »

  There are several other programs that will not open not because the message "failed to connect...". "appeared.

  I received help with back - light to the Windows event log. Everything was going well until I arrived at the end status section, instead of saying "started" it said "stopped". I've changed the status in the direction of "on the road" and then received the following message is displayed:

  "Windows could not start the multipoint Windows event log on the Local computer. Error 1747 - the Authentication Service is unknown. »

  What should I do now?

  Hello

  I suggest you follow under method that can help you solve your problem:

  Method 1: try to make the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• While trying to install the Kodak printer all-in-one on my Vista computer, I get the error "2147287035" system

  Original title: 2147287035 system error

  Hello

  Tried to install Kodak all in the printer software, then I got the error database error 2203 2147287035 tracking system - windows/installer\a720de.msi.

  Can you please help

  Thank you

  Hello

  If I understand correctly you have a problem with installing the Kodak all in a printer on your Windows Vista computer drivers. I would like to know more information on the issue, so that we can help you better.

  1. What is the error message or an exact error code?

  2. What is the Kodak printer model number?

  Let us try the following methods and check if it works for you.

  Method 1:

  Try installing the driver in a clean boot state. Place the computer in a clean boot state will help you to install programs without any interference from third-party program/application.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.

  Step 2: Find and install printer drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 2:

  Try to install the printer driver in the Compatibility Center.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Please respond with the State of the question, so that we could help you better.

• Whenever I start my computer, I get the error 0xC00E556.

  No idea how to solve this problem?

  Hello

   
  1 did you the chnages in the computer before this problem?
  2 did you check status of output in safe mode?
   
  I would like the season you try the following methods.
   
  Check the status of the question in safe mode.
  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Keep the computer in a clean boot state and check the error message. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

• Windows Defender does not open on my computer. Get the error. '0 x 800700006 initialization failed. The handle is invalid. "How can I fix it?

  My computer has been infected by the virus Happili and I would like to run Windows Defender to drink, that it does not open. I get the above error message. How can I trouble Defender or get rid of the virus. No scanning seems to be virus.

  Hello

  Read the information that you do not say what Antivirus you use, which can also be the cause of the problem with Windows defender.

  And also the scan with Malwarebytes AntiMalware; link to information and download here:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually activate new Windows (do not take into account information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Tried to update the computer and got the error code 80070490

  I tried to download the update, and I get the error code 80070490.  I tried to download one that you people told me to download to see if it corrects the problem.  He did not, then I was told that I needed to reinstall Vista from disk, but I don't have the disc Vista came already in my computer.  Is there a link where I can download from you guys directly.  Help, please.

  Hello

  M ode 1.      

  You can try to install the updates to the clean boot, please visit the link mentioned to perform the clean boot below.

  http://support.Microsoft.com/kb/929135

  Method 2.

  See the city link below to download and install the system update readiness tool

  http://support.Microsoft.com/kb/947821

  Method.3

  Follow the link below city to run windows update

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also: http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

• When I start my computer Vista, get the error "the trash on C:\ is corrupt."

  When I start my computer a window opens stating "the trash on C:\ is corrupt. You want to empty the Recycle Bin for this drive? "I select the button 'No' and he throws himself in any case. I try to find the Recycle Bin on the C:\ drive but says that there is not.

  Mister T.,.

  Yes I have both the same. I contacted my service customer security and thay programs say they Ain 't got Nothin' to do with it.

  I guess I'm just screwed.

  Anyway thanks,

  Joe

  I can't vouch for all the following points will help, but it does not hurt to try, if you want to...

  1 check a file system. Link tutorial below: use 2A... sfc/scannow
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  2 do a check disk (chkdsk). Turorial below: use method 1 if you've never done before. Note: You must restart the computer to start the disk check.
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  2 above tasks are to help you fix your computer wherever possible.

  t-4-2

• Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

  Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

  Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxext.exe-integration

  Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxsrvc.exe-integration

  I think they are Intel drivers, but have failed to find a cure for this problem.
  Other than a real slow start it seems no problem.
  Am that I the only one having this problem and everyone know the cure?

  So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

  Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

  Greetings