idac6 of the incorrect data returned by winrm commands

Similar Questions

• Cannot save the incorrect date format

  I keep trying to save my computer... tells me incorrect date format?

  I had the same problem and ended up going through the online chat.  I guess there is a problem with the site, but they managed to sign up to my computer via chat.  Hope that helps

• Display of the VM in the incorrect data store

  Hello

  I have 4 data warehouses and I've migrated a few VM data (DS) to another store, but when I discovered the 'data warehouses' in client VI still the virtual machine appears in the list on the old data store.

  I have traveled the old DS and I can confirm no there are the virtual machine and the .vmx file points to the new location in the settings of the virtual machine, so why the virtual machine appears in the list of the old (source) DS?

  Do you have something (for example ISO) attached to the virtual machine that may still reside on the old data store?

  Review the vmx file (downloadable from the browser data store) and check that there is no reference to the old data store.

  André

• Change the cursor data returned by a function

  Hi I'm trying to change the data that has been loaded in a service using the sql below
  
  create or replace PACKAGE held_types
  AS
  TYPE t_held_cursor IS REF CURSOR;
  END;
  
  create or replace
  FUNCTION F_PROC_SEARCH_BLOB2 (carmela_pepe VARCHAR2, in_length INTEGER, in_offset INTEGER)
  RETURN held_types.t_held_cursor
  AS
  
  v_held_cur held_types.t_held_cursor;
  v_held_rec v_held_cur % ROWTYPE;
  v_lob BLOB: = EMPTY_BLOB();
  v_pos_searchStart INTEGER: = 0;
  v_pos_searchEnd INTEGER: = 0;
  
  BEGIN
  OPEN FOR V_held_cur
  Select 'searchplaceholder' place_holder, id, creation_date
  of une_table
  
  SEEK v_held_cur INTO v_held_rec;
  
  While v_held_cur % FOUND
  LOOP
  -Another request here
  then v_held_rec.place_holder: = a few returned the query varachar
  
  SEEK v_held_cur INTO v_held_rec;
  END LOOP;
  
  CLOSE V_held_cur;
  
  RETURN v_held_cur;
  END;
  
  What is the right way to do this? I can't join the 2nd query that loaded in the cursor, I have to do a little work with blobs as well.
  For the moment, I get compilation errors to try to define v_held_cur % ROWTYPE;
  
  Any help greatly appreciated

  Depends on the amount of data you are talking about.
  If there is "a lot" of data then a collection would be a bad choice to memory, in which case I would, instead, process the data in a global temporary table and leave the code calling to use the data in this table.

  If it's just a small amount of data then Yes, a collection would be nice.

• Updates will be installed not because of the incorrect date

  UPDATES TO WINDOWS DOES NOT WORK PROPERLY. Since THE LAST UPDATE ON 8TH JULY, IL GUARD SAYING NEWS UPDATES AVAIABLE, BUT WHEN I INSTALL them, IT SAYS UPDATE INSTALLED successfully, BUT THE DATE REMAINS JULY 8 AND NOTHING NEW IS INSTALLED?

  You don't have to tell us what operating system you are using, so I'll assume that Vista.

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. in the left pane, click view update history.

  3. find an update for Windows that has failed to install, and then double-click the update to view more information.

  Updates that have failed to install will display failed under status, next to the name of update.

  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  TaurArian [MVP] 2005-2011 - Update Services

• Why PE10 uses the incorrect date format when it creates the files during import?

  Hey,.

  Since I upgraded to 10 EP, I had a problem with the date when the import format.  I have always used the format yyyy-mm-dd when I import my pictures, and this is the format that I choose when I import using Organizer, but it invariably creates files in the format yyyy-mm-dd.  It becomes tedious to rename folders.  Any advice?

  Thank you!

  Hello

  Try the appropriate fix

  Mac: http://kb2.adobe.com/cps/930/cpsid_93...

  Win: http://kb2.adobe.com/cps/930/cpsid_93...

  Brian

• HP Pavilion 15 t-bc000: warranty Checker displays the incorrect Date of expiry

  I bought a new Pavilion laptop and received on Monday (September 12, 2016). When I customized it I chose
  HP 3 years against accidental damage with 3 days on-site Pavilion Notebook Service to go with it. Monday in the end, I noticed that HP has only 1 year what guaranteed manufacturer attached to it. I made MANY phone calls between yesterday and today, and no one is fixing the issue. they stop of me yesterday that the problem is solved and I would see that he fixed on the Web site "in a few hours. It was suspiciously afternoon when I was told this. I waited at least 5 hours to check out the website and it always says that I have a 1 year manufacturer warranty. Then I checked again today, and he said even 1 year manufacturer warranty.

  If you look at my order details it says that product number is ABC (edited for security reasons). If you press fn + ESC or look down the system there say the number of product is XYZ (edited for security reasons). It has the serial number for the TWO serial numbers. I don't know if that's the issue or what. I need this problem in case I need it, and it seems that nobody knows how.

  HP Pavilion 15 t-bc000 CTO Notebook PC (ENERGY STAR) (Windows 10 Professional) /HP ENVY TouchSmart m7-j020dx Notebook PC (ENERGY STAR) (Windows 8.1)

  After many phone calls and 2 hours later, I got my landline number

• problems with the link Date variable

  I am using a Date as a variable binding in a display object, and I'm running into difficulty. I have the binding variable type defined to date and the control flags for the Type of Format and Format defined respectively on 'Date of Simple' and 'yyyy-MM-dd ". When I run the application test module and enter the date in the correct format, the View object returns the expected results. However, when I try to set a property to bind the query for a group of JHeadstart parameters in my definition of the application in order to highlight the variable to an input dateField control bind, I get the following exception:
  
  30 Jan 08:49:56 (ErrorReportingUtils) ERROR - java.lang.IllegalArgumentException
  at java.sql.Date.valueOf(Date.java:104)
  at oracle.jbo.domain.Date.toDate(Date.java:348)
  to oracle.jbo.domain.Date. < init > (Date.java:279)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
  at oracle.jbo.domain.TypeConvMapEntry.convert(TypeConvMapEntry.java:73)
  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:739)
  at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:90)
  at oracle.jbo.common.VariableImpl.convertToJava(VariableImpl.java:546)
  at oracle.jbo.common.VariableValueManagerImpl.doSetVariableValue(VariableValueManagerImpl.java:182)
  at oracle.jbo.common.VariableValueManagerImpl.setVariableValue(VariableValueManagerImpl.java:223)
  at oracle.jbo.common.VariableValueManagerImpl.setVariableValue(VariableValueManagerImpl.java:229)
  at oracle.jheadstart.model.adfbc.v2.JhsApplicationModuleImpl.applyBindParams(JhsApplicationModuleImpl.java:173)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:507)
  at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:1795)
  at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:1989)
  at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:219)
  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1289)
  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:1802)
  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:627)
  to oracle.adf.model.binding.DCInvokeActionDef$ DCInvokeAction.refresh (DCInvokeActionDef.java:140)
  at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:2521)
  at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2260)
  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareRender(PageLifecycleImpl.java:534)
  at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareRender(FacesPageLifecycle.java:98)
  at oracle.jheadstart.controller.jsf.lifecycle.JhsPageLifecycle.prepareRender(JhsPageLifecycle.java:1155)
  to oracle.adf.controller.v2.lifecycle.Lifecycle$ 1.execute(Lifecycle.java:297)
  at oracle.adf.controller.v2.lifecycle.Lifecycle.executePhase(Lifecycle.java:116)
  to oracle.adf.controller.faces.lifecycle.ADFPhaseListener.mav$ executePhase(ADFPhaseListener.java:29)
  to oracle.adf.controller.faces.lifecycle.ADFPhaseListener$ 1.before(ADFPhaseListener.java:426)
  at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:77)
  at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:228)
  at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
  at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
  at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
  at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
  at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
  at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:595)
  
  
  However, it seems that the value of the parameter link has actually changed, according to the message issued by the procedure JhsApplicationModuleImpl.applyBindParams (...) debugging:
  
  30 - Jan 08:46:23 DEBUG (JhsApplicationModuleImpl) - ViewObject ViewObj: bind move_date param value has changed: old value = null, new value = Wed Jan 07 00:00:00 CST 2009
  
  
  
  One thing I noticed that may be of interest - if I run the debugger in the procedure JhsApplicationModuleImpl.applyBindParams (...), a default date in my link variable arises as an object of oracle.jbo.domain.Date when it comes out of the next line:
  
  Object oldValue = vo.ensureVariableManager () .getVariableValue (key);
  
  as opposed to the new value that is sent from the input value of the dateField control, which presents itself as a java.util.Date in the following line:
  
  Object value = args.get (key);
  
  
  
  In the chain of functions leading to the following in the stack trace:
  
  at java.sql.Date.valueOf(Date.java:104)
  at oracle.jbo.domain.Date.toDate(Date.java:348)
  to oracle.jbo.domain.Date. < init > (Date.java:279)
  
  It seems that the value of the java.util.Date is converted to a string and then passed to these functions to be turned into a java.sql.Date object. However, depending on the function of java.sql.Date.valueOf (...), it is expected date format "yyyy-mm-dd", by the header comments:
  /**
  Converts the date a string in JDBC escape format to
  * a Date < code > < code > value.
  *
  s @param a String < code > < code > object representing a date in
  * in format "yyyy-mm-dd".
  * @return a java.sql.Date < code > < code > object representing the
  * date
  * @throws IllegalArgumentException if the specified date is not in the
  * Exhaust JDBC date (yyyy-mm-dd) format
  */
  
  When the input value of the entered dateField control is added as a java.util.Date, the toString() is produce the incorrect date format, that could be seen in the debug output I've included above that says that the binding variable has changed.
  
  
  
  Anyone done this before that can has let me know what Miss me and how to fix it? I have search everywhere on the web, and all the articles I've seen related to bind variables only refer to those of the digital types or string, that are not giving me problems. Same article of "5.9 Using Bind Variables Named" Developer's Guide (http://database.in2p3.fr/doc/oracle/Oracle_Application_Server_10_Release_3/web.1013/b25947/bcquerying009.htm) do not reference using a Date type.

  I had the same problem on a year (using JHeadstart 10.1.3.2.52):

  15 Feb 14:10:31 DEBUG (JhsApplicationModuleImpl) - research component corresponds to the bind param query SubjectenKernPeildatum, value set for 2000-01-01
  ..
  15 Feb 14:10:33 DEBUG (JhsApplicationModuleImpl) - the execution of applyBindParams for BasServiceKern.AdresRollenSubjecten
  15 - Feb 14:10:33 DEBUG (JhsApplicationModuleImpl) - ViewObject AdresRollenSubjecten: bind peildatum param value has changed: old value = null, new value = Sat Jan 01 00:00:00 THIS 2000
  ..
  15 Feb 14:10:33 ERROR (ErrorReportingUtils) - java.lang.IllegalArgumentException
  at java.sql.Date.valueOf(Date.java:104)
  at oracle.jbo.domain.Date.toDate(Date.java:348)

  It appears a java.util.Date is put on the map criteria in the searchBean, this cannot be used as input for a Houston. Bindvariable date.

  My ugly solution was to substitute ' public void applyBindParams (String voUsage, HashMap args)
  in MyProjectApplicationModuleImp (which extends from JhsApplicationModuleImpl of course).
  Check if the value is a java.util.Date, then
  value = new java.sql.Date (((java.util.Date) value) .getTime ());

  Hello, HJ

  Published by: HJHorst on February 6, 2009 12:22 AM

• Could not retrieve the message date

  I tried to show the date of receipt of a message in two ways, first with Message.getReceivedDate () and on the other hand with Message.getHeader ("DATE"). When I try and view the dates with one of these methods, my program stops and nothing is displayed. There are other elements that must be displayed on the screen, but are not. Here is the code I tried:

                                      try {
                                          message1 = currStore.list()[i].getMessages()[0];
                                      } catch (Exception e) {
                                      }
                                      for (int j=0; j < message1.getHeader("DATE").length; j++) {
                                          folderScreen.add(new LabelField(message1.getHeader("DATE")[j]));
                                      }
  

          SimpleDateFormat sdFormat2 = new SimpleDateFormat("h:mma");
          DateField dateField=null;
          try {
              messages = folder.getMessages();
          } catch (Exception e) {
          }
  
          if (messages.length >0) {
              dateField = new DateField ("", messages[messages.length-1].getReceivedDate().getTime(), sdFormat2);
          }
          Dialog.alert(dateField.toString());
  

  What I find really puzzled, it's that when I commented the line of folderScreen.add () in the first piece of code, the rest of the items on the screen appear as expected. In the second piece of code, the screen appears as expected when the Dialog.alert line is commented out. The debugger does not all exceptions or other errors.

  I use JDE 6.0.0 with the Simulator v6.0.0.396 9800, 9800 v6.0.0.246 peripheral.

  Getting the date of the message is crucial to my project. I'm trying to recover the incorrect date? Is there another way to extract the date?

  Thank you

  Scott

  Crisis averted. I've never understood why the first block of code has failed (I suspect because 'DATE' is not a valid header field), but the problem in the second block was that I was using Dialog.alert. I have it displayed via LabelField and it worked. Still confused, but I'm able to go forward now.

  Thanks anyway,

  Scott

• The internal organisation of DIAdem data returned an error of initialization

  Hello.

  I have a laptop that is running Windows XP with installed 10.2 DIAdem.

  Main problem: tiara does not start. A few seconds after trying to run it I get a message "ERROR" box saying

  "The internal organization of DIAdem data returned an initialization error."

  Question that might be related: when I connect to the laptop there is an error message saying:

  "The DataFinder cannot start to an internal error. (122): failed to open the configuration file! C:\Documents and Settings\Settings\Application Data\...\my.datafinder< runmode:="" datafinder="" desktop="">

  The directory C:\Documents and Settings\\Local Settings does not exist on the laptop.

  My first thought was to reinstall just DIAdem. However, when I open Add/Remove Programs tiara is not in the list, so I can't uninstall it. When I just try to run the installer it says I need to uninstall the existing version first.

  No idea how I could get DIAdem working again?

  (btw this laptop is used for courses etc in our society, so I do not know how this problem occurred. Just that they have not been able to run the tiara on her for more than a year)

  Hi such,

  in your 1st post you mentioned that you couldn't find tiara in the Add/Remove Programs list.

  => Please look into this list to or . That's because NEITHER has its own entry in the Add/Remove Programs list. Here you should find DIAdem to uninstall.

  You should use MSIBlast if the 'normal' Uninstall failed for some reason. If you use MSIBlast, he could not guarantee that everything is uninstalled in the right order. MSIBlast is not updated on the dependencies between the msi files.

  You told us that the directory C:\Documents and Settings\\Local Settings exist on your laptop. If you have a proper installation of XP, it must be there. It is sometimes invisible because of your windows settings. If this is the case please change your windows settings so that you can see the folders system as well.

  If you found this file, please remove the following folder: "c:\Documents and Settings\Settings\Application Data\National Instruments\Shared\DataFinder". After that start please DIAdem - a new folder with sub folders 'config' and 'data' are created.

  If the error is-, then I have only one idea: If your laptop doesn't have hard enough to free up space to manage all temporary files that occurs during an installation - so maybe it's that this message occurs if you start the installed application. The installer itself is not warn about in each case, overloaded virtual machine, e. g. fragmented hard drive, etc.).

  Hope that some of my points would help you,

  Kind regards

  dietfons

• The embedded controller (EC) data returned when none was requested. (T420s)

  Everyone sees this warring newspaper system running Windows 8 or Windows Server 2012?

  : The embedded controller (EC) data returned when none was requested. The BIOS may try to access the European Community without synchronization with the operating system. These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  Should I just ignore it?

  Concerning

  Anders Jensen

  This message normally appears permanently, if TPFanControl or PFControl is installed and the start-programs-TPFanControl-optional-acpiecnl was not used to disable logging these events...

• using PIN messages to send the query and return data

  I am working on an app that will send a request to another blackberry and return the data all via PIN messages. There is a user interface where the user selects the contact and start the PIN message with the request. There is a background application that listens to these requests. When we arrive, he must inform the user and allow them to send the requested data or reject the request. If they choose to send, it will undertake a PIN to the sender with the requested data, which will then be returned to the screen. Is it possible by using PIN messages, and if so, can I prevent their display in the list of messages?

  You * can * remove PIN of the Inbox messages. For all purposes useful, this is just a specific instance of an ELECTRONIC message.

• Incorrect date on the screen of TP phone sessions

  Hello

  As you know, the sessions of TP phone screen shows forthcoming meetings. the clock shows properly at the top left, as 18:19 07/17/11, but in the second line, the date of scheduled meeting is not today, as 23/05/06

  Any help will be much approciated

  Fix... While the phone may have the right date because he can pick up the date / actual time of the SIP messages it receives, the planned meeting information gets fed to the screen of the phone of the codec. So, if there is no set of NTP server, the codec may have an incorrect date and it will show the meetings for that day, even if the phone clock shows the correct date.

• oracle.jbo.domain.Number, round() method to change the type of data returned?

  Hi all

  When I tried to round the value to oracle.jbo.domain.Number, it returns data of type oracle.sql.Number. Please see the following code snippet:

  Number unitPrice = new Number (9.95);

  Number of numOfRet = new Number (5);

  Total = (unitPrice.multiply (numOfRet)) .multiply (1.05) .round (2);

  The third line can not compile because the round() method returns a data type of oracle.sql.Number, which generates the compile error. If I put a guy up there, it works. When I checked the javadoc, the method has a number of return type. But it says in the details of the description of the method, it returns a Java int. Can I ask is there something wrong here? You can find the javadoc here: number (Oracle ADF business components API Reference 10.1.2 areas)

  Thank you

  Sheet

  Order to understand, the problem is that the round() method returns a number, but a NUMBER data type.

  NUMBER public tour (int decimal_place)

  Therefore, cast to the number.

  Timo

• Enterprise Manager Database Express 12 c - inability to analyze the data returned by the server

  I just installed Oracle Database 12 c in two configuration of RAC nodes and must use Enterprise Manager Database Express 12 c. On the first page after the connection, all loading areas but areas, who still has the "loading...". "balloon, and I get this critical error: unable to parse the data returned by the server

  Detail:

  TypeError: Error #1009

  Message:

  < report > < / report >

  Journal of memory:

  0: AppContext(): params = null, bootStrap: true

  17: AppContext(): params = [object Object] bootStrap,: false

  28: AppContext(): no current report (object) #0

  em_express = 'true '.

  28: AppContext(): _em_express = true _emx_caching_number = NaN resourceDir = / em/resources

  28: AppContext(): localeChain is null, resourceDir = / em/resources

  32: NLSResources.setRootUrl (): rootUrl = / em/resources

  32: AppContext:createAppContext(): AppContext.execModeem

  71: NLSResources.initResource)

  143: EMAppicationScript - showPage() page.pageFeature = null, currentPage = null

  518: DBUrlNavigator:handleWindowHashChanged(): urlString = https://192.168.56.22:5500/em/shell

  519: DBUrlNavigator:navigateToApp(): dbhome/show_regions

  523: DBUrlNavigator:setCurrentFeature(): function = dbhome/show_regions urlVariables = null

  523: DBUrlNavigator:setCurrentFeature(): the features are different (null however dbhome/show_regions)

  524: DBUrlNavigator:gotoFeature(): function = dbhome/show_regions variables =

  524: length of pages: 1

  524: feature of the page: dbhome/show_regions null

  628: EMPageScript initiateRefresh() urlvariables: null

  639: DbHomeController.refreshModel (): INST_ID select = null inst_name = null

  656: EMAppicationScript - showPage() page.pageFeature = dbhome/show_regions, currentPage = DbHome0.EMApplication18.viewStack.EMLandingPage23

  656: EMAppicationScript - showPage() currentPage.pageFeature = null

  770: EMBaseController.refreshModel (): enter

  770: EMBaseController:refreshModel(): prevRefreshUrlVariables =

  771: EMBaseController:loadXmlModel(): reportName: show_regions

  779: DBUrlLoader:loadInternal(): loading comp = DbHome rep = show_regions

  802: EMBaseController.refreshModel (): enter

  802: EMBaseController:refreshModel(): prevRefreshUrlVariables =

  802: EMBaseController:loadXmlModel(): reportName: show_regions

  806: DBUrlLoader:loadInternal(): loading comp = DbHome rep = show_regions

  806: DBUrlLoader:queueLoad(): lines that load

  812: EMBaseController.refreshModel (): enter

  812: EMBaseController:refreshModel(): prevRefreshUrlVariables =

  812: EMBaseController:loadXmlModel(): reportName: show_regions

  821: DBUrlLoader:loadInternal(): loading comp = DbHome rep = show_regions

  821: DBUrlLoader:queueLoad(): lines that load

  828: EMBaseController.refreshModel (): enter

  828: EMBaseController:refreshModel(): prevRefreshUrlVariables =

  828: EMBaseController:loadXmlModel(): reportName: show_regions

  831: DBUrlLoader:loadInternal(): loading comp = DbHome rep = show_regions

  831: DBUrlLoader:queueLoad(): lines that load

  837: EMBaseController.refreshModel (): enter

  837: EMBaseController:refreshModel(): prevRefreshUrlVariables =

  837: EMBaseController:loadXmlModel(): reportName: show_regions

  842: DBUrlLoader:loadInternal(): loading comp = DbHome rep = show_regions

  842: DBUrlLoader:queueLoad(): lines that load

  849: EMBaseController.refreshModel (): enter

  849: EMBaseController:refreshModel(): prevRefreshUrlVariables =

  849: EMBaseController:loadXmlModel(): reportName: show_regions

  853: DBUrlLoader:loadInternal(): loading comp = DbHome rep = show_regions

  853: DBUrlLoader:queueLoad(): lines that load

  2526: DBUrlLoader.onComplete (): success (str = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="1.42"cpu_time ="0.22"packs = '2' encoding ="base64"compress ="zlib"> < report_id > <!) [CDATA [/ orarep/dbhome/show_regions]] > < / report_id > eAFlUk1vWyEQvPtXoFWvNQ/bcnrwe5Lb5FApiqW0PfSEMGxtJAyEjzo/vwvPqRr1

  BrOzM7Msu4QxpCKjSuqCBVOeFoztEp5s8HnKRZWad/zt3molROknMez4fGqYOgWZ

  5s6sGWEOAEzHKou94AjLlQCGTsWM UQdv8rTeDlT7F2mMfA5XmV, cRLW, 50VT, s.

  5gaJ5UZAzz3TmTnK1iwGsb4bxDBQB0GeJh...)

  2531: XMLUtil.unCompressBase64Binary (): compress the result = < report_parameters >

  status < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = 'status' cpu_time = ".21" elapsed_time "1.41" = >

  "< status db_id, db_name ="1013701001"="CLAUDIA"container_name =" CBD$ ROOT ' pdb_cnt = '1' db_unique_name = 'claudia' oracle_home="/u01/app/oracle/product/12.1.0/dbhome_1 ' db_status = 'Open' db_version ="12.1.0.1.0"db_platform_name = 'Linux 64-bit x 86' db_platform_id = '13' db_startup_since_sec = '2471' parallel '2' = inst_cnt ="Yes"archiver = arrΩt"Stopped"=" "active_state = 'Normal' connections 'Authorized' instance_mode = 'Normal' edition = ="EE"/ >

  < / region >

  2531: XMLUtil.uncompress (): xmlModel after unpacking = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = "1" con_name = "CBD$ ROOT" timezone_offset = "7200" elapsed_time = "1.42" cpu_time = "0.22" packs = "2" >

  < report_id > <! [CDATA [/ orarep/dbhome/show_regions]] > < / report_id >

  < report_parameters >

  status < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = 'status' cpu_time = ".21" elapsed_time "1.41" = >

  "< status db_id, db_name ="1013701001"="CLAUDIA"container_name =" CBD$ ROOT ' pdb_cnt = '1' db_unique_name = 'claudia' oracle_home="/u01/app/oracle/product/12.1.0/dbhome_1 ' db_status = 'Open' db_version ="12.1.0.1.0"db_platform_name = 'Linux 64-bit x 86' db_platform_id = '13' db_startup_since_sec = '2471' parallel '2' = inst_cnt ="Yes"archiver = arrΩt"Stopped"=" "active_state = 'Normal' connections 'Authorized' instance_mode = 'Normal' edition = ="EE"/ >

  < / region >

  < / report >

  2531: DBUrlLoader.reportLoadComplete (): due to loading

  2533: EMBaseController:onLoadSuccess():...

  2534: EMBaseController:parseXmlModel()

  2569: DBUrlLoader:runQueuedLoad(): running another load

  3803: DBUrlLoader.onComplete (): success (str = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="1.13"cpu_time = '0.08' packs = '2' encoding ="base64"compress ="zlib"> < report_id > <!) [CDATA [/ orarep/dbhome/show_regions]] > < / report_id > eAHVU11rwjAUffdXhPwAm7ZqtdSA1E32NibsRUapyUULNolJOv35u3HWDfbgyxgM

  Ajn3M + fccAsLRltfmdrWLXiwjg8IKSzsGq0cb5RoJCjviqh3hbDXplI8ZkX0iYKv

  3unKgdBKOp5OGMa + e0KG2 + tT5Y4HjrEbHoTOPyhcCZBGzumNAyXCdJVvWpjTIZtS

  AofaOJBXVzyMU3phf6sIFj7c26RRzlehZ0...)

  3804: XMLUtil.unCompressBase64Binary (): compress the result = < report_parameters >

  incidents < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = "incidents" cpu_time = ".08" elapsed_time = "1.13" >

  <>incidents

  < INST_ID select incident '2' = home = "diag/rdbms/claudia/claudia2" id = "7480" pb_id = cdate "1" = "29/07/2013 17:33:54" > exception encountered: core dump [qervwFetch] [SIGSEGV] [ADDR:0 x 5] [PC:0x2CA8CC2] [] [] < / incident >

  < INST_ID select incident = '2' home = "diag/rdbms/claudia/claudia2" id = '7479' pb_id = '1' = cdate "29/07/2013-17:32:53" > exception encountered: core dump [qervwFetch] [SIGSEGV] [ADDR:0 x 5] [PC:0x2CA8CC2] [] [] < / incident > "

  < INST_ID select incident = '2' home = "diag/rdbms/claudia/claudia2" id = "7767" pb_id = cdate "1" = "29/07/2013-17:30" > exception encountered: core dump [qervwFetch] [SIGSEGV] [ADDR:0 x 5] [PC:0x2CA8CC2] [] [] < / incident > ""

  < / incidents >

  < / region >

  3805: XMLUtil.uncompress (): xmlModel after unpacking = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="1.13"cpu_time = '0.08' packs ="2">

  < report_id > <! [CDATA [/ orarep/dbhome/show_regions]] > < / report_id >

  < report_parameters >

  incidents < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = "incidents" cpu_time = ".08" elapsed_time = "1.13" >

  <>incidents

  < INST_ID select incident '2' = home = "diag/rdbms/claudia/claudia2" id = "7480" pb_id = cdate "1" = "29/07/2013 17:33:54" > exception encountered: core dump [qervwFetch] [SIGSEGV] [ADDR:0 x 5] [PC:0x2CA8CC2] [] [] < / incident >

  < INST_ID select incident = '2' home = "diag/rdbms/claudia/claudia2" id = '7479' pb_id = '1' = cdate "29/07/2013-17:32:53" > exception encountered: core dump [qervwFetch] [SIGSEGV] [ADDR:0 x 5] [PC:0x2CA8CC2] [] [] < / incident > "

  < INST_ID select incident = '2' home = "diag/rdbms/claudia/claudia2" id = "7767".

  3805: DBUrlLoader.reportLoadComplete (): due to loading

  3807: EMBaseController:onLoadSuccess():...

  3807: EMBaseController:parseXmlModel()

  3866: DBUrlLoader:runQueuedLoad(): running another load

  6262: DBUrlLoader.onComplete (): success (str = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="2.32"cpu_time = '0,35' packs = '2' encoding ="base64"compress ="zlib"> < report_id > <!) [CDATA [/ orarep/dbhome/show_regions]] > < / report_id > eAFlTlsOgjAQ/OcUTQ9AEaJfZa/SVLrBGmBrt8TryyIaE / / mlZmxGRPl4pLPfsaC

  maFSymYcIy0Md7qyNR8mTqHkFjg11ryRaH4kxzjQEhi6S7N5v4ok + EZPx48JNu + L

  K2n + Wz + 2VQy9lnmthrS6Emfsdd2dtcLJJ8ZwSG3dtXr/LGEDe6mch + oFmB5JRQ is

  (< / report >...)

  6264: XMLUtil.unCompressBase64Binary (): compress the result = < report_parameters >

  jobs of < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = 'jobs' cpu_time = ".35" elapsed_time "2.32" = >

  < jobs / >

  < / region >

  6264: XMLUtil.uncompress (): xmlModel after unpacking = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="2.32"cpu_time = '0,35' packs ="2">

  < report_id > <! [CDATA [/ orarep/dbhome/show_regions]] > < / report_id >

  < report_parameters >

  jobs of < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = 'jobs' cpu_time = ".35" elapsed_time "2.32" = >

  < jobs / >

  < / region >

  < / report >

  6264: DBUrlLoader.reportLoadComplete (): due to loading

  6267: EMBaseController:onLoadSuccess():...

  6267: EMBaseController:parseXmlModel()

  6306: DBUrlLoader:runQueuedLoad(): running another load

  8581: DBUrlLoader.onComplete (): success (str = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time = '2.20' cpu_time ="0.63"packs = '2' encoding ="base64"compress ="zlib"> < report_id > <!) [CDATA [/ orarep/dbhome/show_regions]] > < / report_id > eAHdXV2PW0lufZ9f0Wnss/p + fyzcHXg9gyAIMh6M1w/BYtGQ27ItjN3ttOSZeH99

  Tn3o1uHVpYotOw + bARZrscVLXh4WWcVilZ49bj4/PO5vP68f1582 + 83j7uaHi4tn

  j5v324f73c3nzeO7h8dP6/u7zbOrA9F9Yf/w + fb + piyeXYV/Odr6/cPtbnP3cP92

  d1N3Bf7GFPeN3YeHP253 / / 3xBn + b/v2De /...)

  8585: XMLUtil.unCompressBase64Binary (): compress the result = < report_parameters >

  performance of < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = 'performance' cpu_time = elapsed_time ".62" "2.19" = >

  < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="1.83"cpu_time = '0.52' packs ="2">

  < report_id > <! [CDATA [/ orarep/perfpage/main? report_level = Basic]] > < / report_id >

  < report_parameters >

  < bucket_max_count > 128 < / bucket_max_count >

  Basic < report_level > < / report_level >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  "< target start_time =" 29/07/2013 16:35 ' end_time ="29/07/2013-17:35:51" duration = '3651' bucket_count = '61' bucket_interval = '60' is_rac = 'yes' is_cdb = 'yes' inst_low = '0' inst_high = "100000" / >

  < References >

  < reference name = "instance" value = "2" / >

  < reference name = "NUM_CPU_CORES" value = "0" / >

  < name of reference = NUM_CPU «»

  8591: XMLUtil.uncompress (): xmlModel after unpacking = < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time = '2.20' cpu_time ="0.63"packs ="2">

  < report_id > <! [CDATA [/ orarep/dbhome/show_regions]] > < / report_id >

  < report_parameters >

  performance of < region > < / region >

  < top_n > 10 < / top_n >

  < ago_seconds > 3600 < / ago_seconds >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < region id = 'performance' cpu_time = elapsed_time ".62" "2.19" = >

  < report db_version = "12.1.0.1.0" inst_count = '2' cpu_cores = '1' Hyperthreaded = "N" con_id = '1' con_name = ' CBD$ ROOT "timezone_offset ="7200"elapsed_time ="1.83"cpu_time = '0.52' packs ="2">

  < report_id > <! [CDATA [/ orarep/perfpage/main? report_level = Basic]] > < / report_id >

  < report_parameters >

  < bucket_max_count > 128 < / bucket_max_count >

  Basic < report_level > < / report_level >

  < show_sql > 0 < / show_sql >

  < / report_parameters >

  < target start_time = "29/07/2013 16:35 ' end_time = 29/07/20"

  8591: DBUrlLoader.reportLoadComplete (): due to loading

  8592: EMBaseController:onLoadSuccess():...

  8592: EMBaseController:parseXmlModel()

  8652: DBUrlLoader:runQueuedLoad(): running another load

  141803: DBUrlLoader.onComplete (): success (str =...)

  141804: DBUrlLoader.reportLoadComplete (): due to loading

  141808: EMBaseController:onLoadSuccess():...

  141808: EMBaseController:parseXmlModel()

  Thank you

  Valentine's day

  Hello

  I solved the problem by applying the hotfix 16527374.

  Valentine's day