IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

Similar Questions

• Can't access Internet Explore after installing the updates of Windows 8

  We are also having the same problem with the installation of these most recent updates; even if the updates are installed, we are unable to access the Internet Explorer. (Click on 'Internet' and the screen flashes back on the desktop.  It is possible that we are not quite versed in troubleshooting. that, perhaps there is another reason the inability to access the Internet.  If so, we welcome any help and suggestions to fix our problem.  Thanks, * address email is removed from the privacy *.

  Hi Marie Thérèse: It turns out that the problem with our provider ISP share the connection between the telephone lines and network service: we called our provider ISP on this issue after you reset Internet Explorer as well as restore to our file system.  The problem has been resolved.  As a matter of interest for others who may have a similar problem with Internet Explorer, we suggest that he contact their ISP provider to determine if the problem can be solved.  Please contact me.  * E-mail address is removed from the privacy *

• I can't log on windows 7 as an Aministrator user after installing the update of security for windows 7 KB2286198.

  When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Treo 700W blue tooth w/daimler Chrysler uconnect works does not after installing the update.

  Anyone having problems with his tooth of 700W overalls after installing the update? My Jeep Grand Cherokee blue tooth uconnect system worked perfectly until I installed the update. Now, it will not work. I have went through all the procedures on several occasions. The phone will discover the uconnect, but when you put the 4-digit access code that you assigned to the vehicle, it does not connect thought the secure connection. I called Verizon and Daimler Chrysler and the two do not know why this won't work. I have reset the system, uconnect on the vehicle by their instructions. Any help would be greatly appreciated.

  Message is about: Treo 700w (Verizon)

  A hard reset of the Treo has solved the problem, but you will lose all your data and applications.

  Message is about: Treo 700wx (Verizon)

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• I have problems to install the update.

  I have problems to install the update with the supplied serial number - he asks me a previous version serial number which I did not.

  Please check: https://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

• After installing the update of Lightroom CC (2015), it relies of empty previews?

  After installing the update of Lightroom CC (2015), standard previews become white as he build the images during the import. Existing previews are very good which were imported before. Reinstalled the previous version and everything nice work!

  Hi JohnKOTC,

  Please follow the steps below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

• Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  The adobe reader program no longer exist in my C drive.

  I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

  Please help because my exams are in 5 days and all my study material must be opened with pdf!

  Thanks in advance.

  Hi, Fabien,

  Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

  Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

  Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Rahul Tyagi

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Photoshop and Illustrator is not opening after the update of Windows 10 anniversary

  Hello!

  After the update of Windows 10 anniversary, Photoshop and Illustrator can't open. What should I do?

  Thank you!

  not serious.

  You get an error message or Apps do not respond when you try to open.

  You can run the System File Checker to see if there are any problems with Windows OS after upgrade files,

  https://support.Microsoft.com/en-in/KB/929833

  As for the latest CC applications you need to install the latest package updates Visual C++ Re-distributable.

  See the link below:

  Updated Visual C++ Runtime 2015

• Error code 800F081F while trying to install the update to windows security

  I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!

  Thank you!

  source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821>

  If the system update tool does not resolve the problem, you will need repair Windows.

  UTC/GMT is 15:34 Wednesday, June 13, 2012

• I get error code 802000D when I install the updates of windows. How can I fix this error?

  I get error code 802000D when I install the updates of windows. What this mean and how can I solve this problem? Please answer. Thank you.

  Hello

  ·         Did you change your computer before this problem?

  I suggest to reset the Windows Update components and check if it works.

  See article:

  http://support.Microsoft.com/kb/971058

• Install the updates of Windows 7 not Windows 10

  I have more than 30 windows 7 selected updates and when I click OK it brings back me to the GET started installing Windows 10 screen. I want to install the updates, not Windows 10 and can't find a way to do

  Do you plan on installing Windows 10 soon?

  If this isn't the case - get rid of advertising for it in this way:

  Copy and paste the text below (and especially) the obvious markers in a text file, save it as "DisableGWX.reg")<-- changing="" even="" the="" file="" extension="" -="" if="" you="" cannot="" see="" it,="" you'll="" have="" to="" change="" your="" windows="" explorer="" view="" a="" bit="" to="" make="" this="" easier)="" and="" then="" use="" that="" (right-click="" on="" it,="" merge="" it="" into="" your="" registry)="" to="" disable="" the="" upgrade="" 'pushiness'="" you="" are="" seeing. ="" restart="" to="" get="" the="" full="">

  -COPY EVERYTHING BELOW THIS LINE-

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\GWX]
  "DisableGWX" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
  "DisableOSUpgrade" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade]
  "AllowOSUpgrade" = DWORD: 00000000
  "ReservationsAllowed" = DWORD: 00000000

  -COPY EVERYTHING ABOVE THIS LINE-

  Once this is done, you should be without the notification and your Microsoft Updates must return to its normal state.  If you ever want to upgrade to Windows 10 new (remember, this is a work in progress and if you upgrade already on this system and active - there is a license for Windows 10 you'll never pay for related to this individual machine for the life of this individual machine) you can probably use the media creation tool to make * or * reverse the registry values (all above (: 00000001 becomes: 00000000 and all DWORD: 0-0000000 becomes: 00000001) and save this file and MERGE again.  Restart and you are back where you were before.

  * TIP * for everyone out there.  One thing I saw not advertised on the option of restoration of 30 days you have with Windows 10 is that * if * you run the media creation toolat any point in these 30 days, it BREAKS the ability to restore - even if you did just to create an ISO image, so you should have the installation media to continue.  That's because this tool recreates the $' Windows. ~ BT' and ' $Windows. ~ records of the WS on the root of your C drive and these two folders and their content after the upgrade as well as the "Windows.OLD" folder (the only 'visible by default' one of the three) are all necessary for the process of restoration work.

  It's a little 'reflection', but the images (animated ones) could be useful at least some number of words is above this line...

  

  (Animated - GIF to display in a web browser for full effect.)

  (Same basic steps for Windows 7 users...)

  ... and JUST in CASE WHERE someone does not know how (in Windows 8.1) put in place their system so that they can see the file Extensions (the letters after the dot in filenames)--> here is a GIF to show you how:

  

  (Animated - GIF to display in a web browser for full effect.)

  (Yes, there are some similar settings in Windows 7 to see the file extension.)