IdeaPad Z560 without web. Thoughts?

Similar Questions

• IdeaPad U410 without hard drive, lights after updates.

  Hello

  I imported just an Ideapad u410 of the United States to the United Kingdom. It turns on well, I started noticing the proglem wifi everyone have. Not much, got a USB wifi adapter carrying around I can use. Then I noticed that the hard drive (C, no other visible hard drive) was rediculously small (20-30 a few GB, I forgot the exact figure) with almost all of it is the used space. I thought it was a partition for the operating system and for some reason, the rest of the disc wasn't show. I noticed icon indicating the button windows update turn off and thought that maybe the installer was not complete, so I pressed restart. It kept restarting, download updates and reboot, I'm gone for dinner when she proclaimed it would now install update 1 of 96. When I came back the laptop was turned off. I turned it on to be satisfied by a never-ending cycle of BSOD when starting, followed by a Startup Repair failed... I guess that it is are not enough space on drive C for the update of windows. What should I do now?

  
  

• Overview of the plugin performance without Web access?

  It seems that the plugin install.bat overview of performance (for VirtualCenter 2.5 update 4) requires the installation of the VMware Infrastructure Web Access function.

  This plug-in works with the VI Client? If so, is there a way to install and use the plugin without access installed Web?

  the plugin works in the VI Client, but it works like a plugin of vCenter.  So, therefore depends on the Internet access service.  I don't know inside and on how the plugin works, but if the Internet access service does not work when you try to go to the tab overview of performance, it will be just error.

• HP Jetdirect 300 x: updated HP Jetdirect 300 x (J3263A) without Web Jetadmin or HP Download Manager

  If you have a HP Jetdirect 300 x (J3263A exactly) with an older version of firmware, such that H.08.20, you may have noticed it is almost impossible to update. The HP Download Manager is supposed to be used to update the product to the latest revision of the firmware, but it does not work and gives an error. Similarly, the HP Webjetadmin software does the same. The two pieces of software uses the SNMP protocol. Newer versions of the firmware are supposed to be updated via FTP or HTTP, but if you're stuck with an older version such as H.08.20, you're out of luck on these methods. So how is one with an older firmware supposed to upgrade to the latest revision?

  After days of experimentation and dig through the documentation and forums, I found a solution! TFTP. This process is not documented anywhere to my knowledge (and believe me I looked!) so please read carefully.

  The first step is to set up a TFTP server. You can try setting up on Windows or Mac OS X. For the record, however, I tried to use the built-in Mac OS x and had no luck TFTP server. Your best bet is to use a Linux virtual machine or a live cd. I used Debian and tftp-hpa. I have no luck with tftpd.

  1. Machine Debian Boot
  2. Make sure you have an IP address that is accessible to the Jetdirect. To configure the IP address, follow the instructions here: https://wiki.debian.org/NetworkConfiguration#Setting_up_an_Ethernet_Interface. If you are already connected to a DHCP server, you should not do anything.
  3. Install tftp-hpa:
     $ apt - get install tftp-hpa
  4. Copy the firmware file to the tftp directory, in my case "300X_H0867.dld".
     $ cp 300X_H0867.dld/srv/tftp /.
  5. Give everyone read on the file permissions
     $ chmod a + x /srv/tftp/300X_H0867.dld
  6. Eventually, try to download the file from another computer on the network to check if it works (assuming that 192.168.1.1 the server IP).
     TFTP $192.168.1.1
     TFTP > get 300X_H0867.dld
     If all goes well and as the file downloads, you should be good to go!
  7. Telnet in the Jetdirect 300 X. If necessary, restore default values to enable telnet server and set an IP as shown here: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpj02738
  8. Once in a telnet session, run the following commands (assuming that the tftp server address is 192.168.1.1):
     TFTP-server: 192.168.1.1
     updated - file: 300X_H0867.dld
     upgrade
  9. Immediately after that hit upgrade and pressing on enter, you will get a message saying that the Jetdirect will begin the update and your telnet session will be closed.
  10. In a minute or two, then try to telnet in the Jetdirect. If all goes well, type ' / ' and press ENTER, and you should see that the revision of the firmware is set to the new version!

• a key error recovery (ideapad Z560 (0914))

  I have okr button but you installed Windows, when I tried to restore my system it restarted but gave the error message saying «Disk read error press Ctrl + alt + delete to restart» my system does not work properly, and I want to restore it to an earlier time. also windows restore is not working.is there any way out of this.

  
  

• Cannot use the web update. where can I get full web not updated?

  Tried to update but cannot. I used to download a full version without web update, but can't find it. Where is it located?

  Thank you, jack

  Here you go, plenty of installers: https://www.mozilla.org/firefox/all/ (scroll down to your preferred language)

• OneKey Recovery Disk without OneKey Recovery

  I have IdeaPad Z560 with Windows 7 Home Premium pre-installed. I changed the OS to Windows 8/8.1 (100% legal, my University) and probably in this way, I deleted a hidden partition. Fortunately, before I created with OneKey Recovery recovery disk and now I want my OS original back, but I have no idea how do. I tried to start the computer with the recovery disc but computer turns off whenever I'm trying to do. What should I do to restore my settings from the factory with OneKey Recovery discs?

  KAC says:

  I have IdeaPad Z560 with Windows 7 Home Premium pre-installed. I changed the OS to Windows 8/8.1 (100% legal, my University) and probably in this way, I deleted a hidden partition. Fortunately, before I created with OneKey Recovery recovery disk and now I want my OS original back, but I have no idea how do. I tried to start the computer with the recovery disc but computer turns off whenever I'm trying to do. What should I do to restore my settings from the factory with OneKey Recovery discs?

  Take a look at this link.

• Z560 screen blank & punt for 2 hours

  My ideapad Z560 is started for more than 2 hours and now the screen is totally white-nothing is on the screen please what I do?

  If it is not question of system, probably ram or video card.

  try to perform the clean installation of windows by pressing a button to retrieve key.

  also, try to remove, replace or Exchange the ram sticks.

  If it doesn't work, problem probably graphics card and you need to call lenovo support line. (to ship your laptop in return)

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Cursor controlled by a web application home page

  I use a homepage slider that works fine, but when I have a web application the control, he can't seem to find the images. This is my list template:

  < div data-inch = "{tag_thumb image - 100w 75 h} ' data-src =" {tag_large image - 960w 480 h} ">"

  < div class = "camera_caption fadeFromBottom" >

  < h2 > {tag_name_nolink} < / h2 >

  < p > {tag_project brief description}-< a href = "{link tag_project}" > LEARN more < /a >

  < /p > < / div > < / div >

  The dynamic tags "tag_thumb image - 100w 75 h'and'tag_large image - 960w 480 h" are fields defined in the images.

  This is what works:

  "< div data-thumb="/hpprojects/images/slides/thumbs/slide1.jpg "data-src="/hpprojects/images/slides/slide1.jpg "> < div class ="camera_caption fadeFromBottom"> < h2 > project title 1 < / h2 > < brief description p > goes here - < a href =" # "> LEARN more < /a > < /p > < / div > < / div >.

  The strange thing is that, when I insert the path of the image in the list template, and not the dynamic tag, it works.  However, that defeated the purpose of the use of the web application.

  Can someone please help?

  Some examples of work...

  Without web app (work) http://gbcookeinc.BusinessCatalyst.com

  With web app (does not work) http://gbcookeinc.BusinessCatalyst.com/slider.html

  Hey there,

  I bet that you do just the image tag as is?

  Custom field image will make an image wrapped in a link to the detailed view, _nolink option will make the image without link. _Value is what you need to get the location of the raw source of the image.

• Need help with HP 64 GB v125w usb

  I need assistance to access my HP UBS on my Lenovo ideapad Z560 laptop v125w.  I am running windows 7 and I can get usb recognized in the equipment and devices, but it fails to install properly (Error 52). It is listed in the USB storage device manager and not in my hard drives or disk management. And now my flash drive I used on this same computer weeks is not work... HELP PLEASE!

  Follow the on this web page instructions for answering the question to Microsoft Community.

• How to overcome error * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)

  Hello..

  I'm editing O. S XP for my laptop of Lenovo ideapad Z560 after reformulating BIOS and copy the files over and before the program installation the following error will come (it has no virus in my laptop).

  the error is: * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)

  before I was using two operating systems on different (windows7 & xp2) disks I thought of removingtwo os and re install windows xp3 then I had been troubled by the error mentioned above

  Please give me the solution for this problem

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://support.Microsoft.com/kb/316401

  For more information, see this link:
  http://support.Microsoft.com/kb/324103

  It will be useful.

• Definition of my holiday iCloud with only an iPhone response

  I'm on vacation and want to activate my out of office/vacation for mu icloud mail response. How do I do that without web access on a computer? When I try it on my iPhone I get the splash screen for iCloud Apple and he can't get through.  Thank you!

  Here are the steps to set up an automatic response: iCloud: send an auto-reply

• Firefox won't load any websites at all

  I have been using Firefox for a while more, as IE 10 would not work for me, but a few days ago Firefox has stopped working all together. I click Firefox and everything that happens is that it loads a new tab, and it has a blank page without web address. If I type in a web address, it "charge" for a fraction of a second and is still a blank page. I uninstalled and reinstalled and did not work. I have also reset Firefox, and it does nothing except that I get a useless toolbar. I have no Chrome, but IE works fine for me because I've downgraded to IE 9. I prefer Firefox, as it is a bit faster and more simply organized. Is there anything else I can try to solve this problem?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• El Capitan mail app - the message body empty conversations

  Hello

  I have this problem: Mac Mini end of 2012, El Capitan 10.11.4, Mail with POP3 and IMAP accounts 9.3 app mixed, Classic view (mailboxes on the left, the list of the top right of the mail messages, the body of the message below on the right). I have just a few messages from Inbox of 2000 + (says the header to Mail.app window).

  When I open the mail application, I can see the body of the message (body), as long as I select just a simple mail, non-conversation in the list. The problem starts when

  I click on some 'conversation' (blue triangle) mail: the mail body field appears empty, except the headers. Double click opens an empty window (just e-mail header fields are written). The second problem is, when I click again to all mail non-conversation - body is now empty (but it worked just a moment ago!).

  Smoking using mail app, but only until what I click on message "conversation."

  I have tried to box the letters a regeneration, the PRAM reset, removed the ~/Library/Mail/V3/MailData / envelope *, ExternalUpdates. * I don't have any mail extensions, the problem exists with and without web browser running, I don't have any antivirus running.

  In Mail I could solve this problem by checking and unchecking "arrange by conversation" (point of view' menu) several times.