Identity on VC device logs settings

Similar Questions

• How can I change the logging settings in Vista Home Premium?

  I was in the management of the computer and discovered a few troubling record, such as how he was following my use of the office. Worse, I couldn't find no way to enable or disable the newspapers, as the procedures I used XP Pro and 2K 3 server did not work.

  How can I disable logging of my use of Microsoft office, so that change the other settings for logging in Event Viewer? I had a class on the audit for XP & Server and I had to sometimes see newspapers located in a business environment (never had to do anything with Vista or 7 well) so I have a good idea of what to leave past generations of operating systems. How do I change however logging in Vista Home Premium? I can't access "local security policy" in my version of Vista.

  SlickRCBD salvation,

  There is no way to disable the use of Microsoft office in the event viewer.

  However if you want you can completely turn off event viewer of logging of all events performed on the computer by disabling the service on the computer Windows event log.

  (a) click on the start menu, type services.msc in the search box and press ENTER.

  (b) click on services in the list now locate the Windows event log service

  (c) right-click on the service and click on disable

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 10.2 beta IDE device log display

  "Journal of the device" is? It has useful features of filter and highlight.

  Console.log () and qDebug() should output device or console by choice of dev. You must provide both.

  See "System Log" is still there but cannot be seen in Windows - view.

  Show it in the Console using the console selection menu.

• refine for cisco device logging

  Dear Netpro community,

  I'm trying to tweak the AAA portion on the cisco device

  Here is my current setup:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  If the radius server is offline, the first level is not a problem. However, the problem occurs if I want to go to activate the mode. It will not use the enable password set locally, but instead he will go to and search radius for authentication server.

  Debug:

  test_switch > en

  Password:

  01:05:15: RADIUS: authentication using the $enab15$

  01:05:15: RADIUS: ustruct sharecount = 1

  01:05:15: RADIUS: pass on tty0 id 44 x.x.x.x:1812 initial, request for access,

  Len 72

  01:05:15: 4-6 AC10E10F attribute

  01:05:15: 5 6 00000000 attribute

  01:05:15: 61 6 00000000 attribute

  01:05:15: assign 1 to 10 24656E61

  01:05:15: assign 2 18 69ABFDF8

  01:05:15: 00000006 6 6 attribute

  01:05:20: RADIUS: retransmission id 44

  01:05:25: RADIUS: retransmission id 44

  01:05:30: RADIUS: retransmission id 44

  Password:

  01:05:35: RADIUS: marking x.x.x.x:1812, 1813-dead server

  01:05:35: RADIUS: tried all servers.

  01:05:35: RADIUS: no valid server found. Try any viable Server

  01:05:35: RADIUS: tried all servers.

  01:05:35: RADIUS: no response for id 44

  01:05:35: RADIUS: no response from Server

  Password %: timeout expired.

  % Authentication failure.

  How can I make sure that I can access the switch privilege mode if there is no path to the radius server?

  It took 20 seconds of the original program:

  01:05:15: RADIUS: pass on tty0 id 44 x.x.x.x:1812 initial, request for access,

  Len 72

  ... with three broadcasts, until the server has been marked dead:

  01:05:35: RADIUS: marking x.x.x.x:1812, 1813-dead server

  Maybe you should mark a server RADIUS MIA as death more quickly, by setting a timeout of the RADIUS server (for example: 1 sec.).

  for example:

  RADIUS-server host aaa.bbb.ccc.ddd auth-port 1812 acct-port 1813 timeout 1 key xxxxxxxxxx

  If the server is recognized as dead earlier (4S, broadcasts incl. 3) maybe it's possible to use the locally configured enable password before the "time-out of password occurs".

  I do not say for sure that this will solve your problem, but I know I want to try it to find out.

• HELP ME PLEASE CHANGE THE LOG ON / LOG SETTINGS ON HP/WINDOWS 7

  
  

  Hello Mbaraket,

  Can you be more clear on what you try to change the behaviour of?

  Based on what you say, I think you are talking about the screen saver coming and locking your computer or power settings you have enabled to put the computer to sleep after a certain amount of time...

  Here's how to change the two...

  Adjust your power settings:

  ->-> Power Options control panel Edit power plans

  Set your screensaver:

  Panel-> personalization-> screen saver.

  Then uncheck the "on resume display logon screen" or extend the timeout.

• With device log Insight network connectivity problem

  We manage the virtual appliance 1.0 - beta and I noticed that the virtual appliance will fall the network periodically for a short period. I had constant pings, it will and it will just stop respond for anywhere from a few seconds to several minutes. You can also see in the capture where the data is missing in the user interface of screen attached. I know that we are not the problems with our ESXi hosts or dvSwitch because there are many other virtual machines running on the same host ESXi and same VLAN and they are not network connectivity problems. Does anyone else know this?

  Sounds like a network problem. Perhaps you have a dual IP / MAC address on the network? Do you perhaps have a routing problem on the network log Insight's sitting on that?

  Can you generate a bundle of support and download the instructions here: http://kb.vmware.com/kb/100852 (no need to SR just create a file called mvanbeck)

• Configuring files OSB logging settings

  Dear Experts,
  
  I need to know if it is possible to connect to the folder all the error messages (IE variable $fault) during execution of traffic without using stream neither newspapers nor report. Is this possible? If it is, that the correct configuration of the WLS parameters?
  
  Kind regards
  Mike
  
  Published by: Mike.Di on 3-Dec-2009 5.55
  
  Published by: Mike.Di on 3-Dec-2009 5.57

  I see only one solution: using the facilities of debugging or tracing of OSB. You can turn on tracing of performance for a particular proxy service, or you can turn on debugging of pipelines in the file alsbdebug.xml in the home of your domain. For the newspaper of the WLS should have a severity of debug level. Of course, this would mean that you would have many more messages in log files, not only the errors. I would not recommend it to a production environment.

  Why don't you use the Log action that is designed to send messages to the log file of WLS?

• Is it possible to get the size of the font defined in the devices display settings?

  I need to reposition some of the controls when the font size of the unit (defined in the control panel / display panel) is too big / small. Is it possible to get this in QML?

  If you want to limit the minimum OS 10.2 the behavior you describe in your last post can be managed using textFit...

  http://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__label.html#property-TextFit

• Problem connecting to the new router

  When we all first our WVC54GC Setup was quick and easy, and we used it without event for 1-2 years. Now, we have replaced our old router with a WRT610N. Everything else, wired and wireless, connected to the new network without event after I have updated their SSID settings and security. (A new uses WPA - WP2, the an old WEP) but for this camera I can not to do. I read the articles on this page and plugged all the correct settings, but it still won't talk of it in wireless mode. (With a cable that is no problem). What I'm missing here?

  You must be identical on both devices wireless settings to establish communication between your router and the camera... Ensure that your camera settings Wireless 2.4 GHz of your router... Try Basic WEP security and see if that works, if WEP works you can change security to WPA... Once you have set matching the wireless settings, unplug the cable ethernet and power cycle the two devices and see if you can see your wireless camera...

• Firefox Sync settings are lost when you restart the Android device, is this normal?

  I use Firefox Beta v14 for Android.

  After a restart of the Android device, synchronization settings are lost, nothing in the settings 'account and synchronization '.

  Sorry to hear that Firefox is losing your sync account. You have installed Firefox for Android onto an SD card? We are tracking the reports like yours to https://bugzilla.mozilla.org/show_bug.cgi?id=768102. We believe that Android itself is deleting accounts when the Firefox application is installed on the SD card. Can you check if Firefox is installed on an SD card?

• Restore the computer to factory settings

  Hello. How to restore my Vaio (Model PCG - 71318L) computer to the factory settings. I don't want to do a system restore to a point in time. I want to restore it to factory settings.

  To reinstall windows using the advanced recovery it says I need a 'windows install disc", but the computer did not come with one. How to create a "windows install disc." How this disc is distinguished by the "system repair disc.

  If I create a "system repair disc" I'll be able to use it as a 'Windows install disc"when I reinstall windows.

  Is reinstall windows identical to restore to factory settings? If this is not the case, how it restore to factory settings?

  My OS is Windows 7 Home Premium

  Thank you and best regards

  Hello
  Welcome to the Forums of Discussion of the user.
  PCG - 71318 is a chassis number for all VPC-EB-series laptops
  to find your number of exact model please consult this guide here: http://esupport.sony.com/US/p/support-i... 4 #notebook

  your laptop EB series has a hidden partition, to access with the computer turned off simply press the [help] button, it should turn on the computer and start the backup partition.

  If it does not turn on the computer and the key to tap the [F10] a few times to the VAIO logo
  a screen indicating "Edit Boot Options"
  Just press enter and launch the tools

  Once the load of tools choose "C Drive Recovery" and all will be wiped clean back to the original factory image. You can even use data backup to backup all your files before you begin the Format.

  Once the device is returned to the original image once you're at the level of the windows desktop, press [help] to open VAIO Care and create a set of recovery software. all you need are 2 blank DVDs

• HP Pavilion 2201TX G4 isn't close to bluetooth devices

  Hello

  I use HP Pavilion laptop 2201TX G4, OS is windows 8.1. My laptop is not able to find all the devices (mobile phone, bluetooth speaker). and at the same time other bluetooth devices (laptops, mobile phones, etc.) can not find my cell phone no more. Please help me.

  Thains,

  Amit

  Hello, @Amitvijay 
  
  Welcome to the HP Forums.
  
  It seems you are trying to use bluetooth on your laptop. That your laptop can not see devices and those devices are unable to see the laptop. I will try to help you with this.
  
  I would like first to provide you with these documents as reference sources. They have measures that may be able to help. Please use the documents first, before any other action is attempted.
  
  The problems of Bluetooth
  Using Bluetooth (Windows 8) devices
  
  To go with those who are here other steps you may need to try:
  
  (1) ensure that all Windows updates are completed.
  (2) updated bluetooth driver, use it Support Assistant HP.
  (3) test
  
  If it has the same results try:
  
  (1) go to the Device Manager.
  (2) right click on the Bluetooth device you want to
  (3) choose uninstall
  (4) restart the laptop

  (5) test of
  
  If this did not help, next update of the BIOS . If this doesn't help not continue below.
  
  (1) go to the Device Manager
  (2) right click on "Bluetooth device" you want
  (3) select "update driver software... »
  (4) choose "Browse my computer for driver software".
  (5) choose "Let Me pick from a list of drivers for devices on my computer.
  (6) select "Ports (COM & LPT)"
  (7) select "Microsoft" to the list of "manufacturers".
  (8) finally select "Standard series via a Bluetooth connection.
  
  If you are unable to connect to a Bluetooth device, try the following:
  
  (1) search for 'Change device' in the start menu in Windows 8.
  (2) click on where it says change device installation settings.
  (3) select No, let me choose what to do option.
  (4) check the automatically get the device app option
  5) click Save to save the settings that you have just selected
  
  So, you can try this
  
  1) go to RUN (Windows Logo + R) and type "services.msc" and Enter
  (2) now find 'Bluetooth Support Service' and double click it
  (3) now, click the Log on tab and type "Local Service" without the quotes
  4) click on "account".
  (5) now remove any authorization of passwords the password field blank
  (6) underneath the left superior title should be a hyperlink 'Start' click
  
  If you meet all of the above and still cannot see a device or connect with bluetooth, it is more than likely a hardware problem. Please let me know how you get in the steps. If you need assistance with something let me know.
  
  Thanks for posting on the HP Forums.

• AUS auto fill device seems to not work.

  I'm running CSM 4.0.1 and followed the instructions on the use of CSM for updating a filewall ASA5540 through aus I created a policy to the CSM AUS IP address and credentials and chose "Peripheral" to deploy on.

  Page 1-3 of "Getting started with AUS", he says: when you use the Security Manager to deploy to a device via AUS configurations, the device is automatically added to inventory AUS once the device contacts successfully AUS and retrieces configuration. This is the normal method for adding devices. »

  FSU fails the attempt with this error message:

  CALLHOME-DB-DEVICE_NOT_FOUND: the Record for the unit with the remote control-ASA-1 ID is not found. Action: Make sure that the device has been added to the FSU and the configuration of device contains the appropriate device ID.

  And ASA (8.4.1) with active debugging device, displays this error msg:

  Client to remote-ASA-1 # Auto-update: DeviceDetails Envoy/setting to automatic update / AutoUpdateServlet of the 164.72.44.162 Server
  Auto-update client: treatment 164.72.44.162 Server UpdateInfo
  Auto-update client: failed to contact the: https://164.72.44.162/autoupdate/AutoUpdateServlet, reason: ErrorList error code: CALLHOME-DB-DEVICE_NOT_FOUND, description: save for the unit with the remote control-ASA-1 ID could not be found.

  He denounces the device ID is not found. But the host name of the ASA is identical to the device at the WSC ID.

  Is there something I'm missing or not do to make this work?

  Hello Jeff,.

  There are few things to make the FSU work, we will try to list and make sure that we have everything in place.

  1. we need to set up the device to let do via CSM aus:

  in the peripheral view select your firewall and configure your AUS server via

  Device Admin-> server-> AUS

  The ip address will be the same that the CSM and credential even allows you to connect to the server of CSM

  2 - deploy to the ASA to ensure this is the config AUS. The deployed config should look like:

  Auto-update hostname device id
  source/autoupdate/AutoUpdateServlet auto-update server https://*@

  3. ensure that the hostname of the device is EVEN under the display name in the CSM (you can check by right click on the device and click Properties of the device)

  4. we are now ready to set up the AUS server. Right-click on the device and select properties of the device. In the automatic update (bottom) section

  Fill in the fields by putting all the necessary information. The ip address and server name must be the same as the CSM (AUS runs on the same server)

  and the credentials are the same used to log in to the GUI CSM and used at the point 1

  5 - once this is configured, you are ready for the first deployment. It is important to deploy just as the CSM must create the right configuration file on the server of the FSU. After the first installation, you should be able to see the device listed in the portal AUS (under devices)

  Let me know if it worked.

  Stefano

• The phones call log smart blackBerry, connection cables and several SMS

  Hello... Using a Blackberry Curve 8900, bought about 10 days back.

  Can you please advise me how to put the call on log settings...

  I can't see the fact/received/missed calls in the morning, when I check in the evening...

  Pls advise.

  Also, I have a cable in my car for I - pod, which works very well (when I connect the cable for ipod, the sound comes through the speakers of the car)... but when I connect it to the port of blackberry, there is no output sound in it... (I was eager to do away with the i - pod)... assistance requested!

  Also, I noticed that I can not add more than 10 prs both for texting!

  It's very disappointing, because I used earlier my nokia e90 to send 100 sms to a go... and that for I type on my system and send my system... any help on this would be great too!

  urajay wrote:

  Hello... Using a Blackberry Curve 8900, bought about 10 days back.

  Can you please advise me how to put the call on log settings...

  I can't see the fact/received/missed calls in the morning, when I check in the evening...

  Pls advise.

  Try to hit the green button to go in your call log. Click on the menu button and go to Options. Try to change your phone list. Also if you are in your list of Messages you can press ALT + P to display the list of your calls

  Also, I have a cable in my car for I - pod, which works very well (when I connect the cable for ipod, the sound comes through the speakers of the car)... but when I connect it to the port of blackberry, there is no output sound in it... (I was eager to do away with the i - pod)... assistance requested!

  Not sure about this one. He said that it is compatible with the BlackBerry? Since the BlackBerry has a receiver bluetooth inside, products like this work well for listening to the music and phone calls in the car

  http://NA.BlackBerry.com/eng/devices/accessories/visormount/

  
  

  Also, I noticed that I can not add more than 10 prs both for texting!

  It's very disappointing, because I used earlier my nokia e90 to send 100 sms to a go... and that for I type on my system and send my system... any help on this would be great too!

  Currently, 10 is the maximum that you can send at once. There's no other way around it. Do not know if a third-party program is there who can

• Can't see resource calculate in the vRA, even if the vSphere Agent log shows a cluster

  I'm debating on the issue of whether the question should be minimal vRA installation requires anonymous authentication in IIS?  Or am I crazy?  I let you choose how to respond.

  This is a new installation of minimal vRA 6.2.1 new identity applice, vRA device and a single server Win2012R2 for all roles of IaaS. Gentle and the pre - req check tool was happy before you install it.

  However, when I went to add an endpoint yesterday for the vSphere Agent, I installed, I get the following error in the logs of vRA:

  Exception occurred retrieving the work of VRM: request the HTTP is unauthorized with client authentication scheme 'Anonymous '. The server received authentication header was 'NTLM, Negotiate. " Inner exception: the remote server returned an error: (401) unauthorized.

  A minimal installation uses anonymous authentication?  The pre - req just had check tool has that disable and use Windows authentication with the suppliers of the following order: NTLM, Negotiate.  Hmmm..., well although perhaps I'll activate anonymous and restart the agent of vSphere and see what happens.  I restart the agent and now I only get an error on the authentication and the following of the vSphereAgent.log seems to say that the endpoint is communication and a cluster of back of the vCenter:

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping sent successfully: [<? xml version = "1.0" encoding = "utf-16"? > < pingReport = "vSphereAgent-XXXXXX" CurrentVersion "6.2.0.0" = Nom_agent agentLocation = "VRAIaaSServer01" WorkitemsProcessed = "0" > < Endpoint externalReferenceId = "F86349A2-B8D7-4E17-9599-CC4F5C9E94B3" / > < nodes > < node = "ClusterName" type name = 'Cluster' identity="XXXXXX.mydomain.com/vCenter 5.5 Test/host/NOMCLUSTER" datacenterExternalReferenceId = "data center-21" isCluster = "True" managementEndpointId = "72195415-bdb6-4f7a-a3ac-92b9c4eca960" / > < / nodes > < AgentTypes > < AgentType name = "Hypervisor" / > < AgentType name = "vSphereHypervisor" / > < / AgentTypes > < / pingReport >]

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping completed report

  However, when I navigate to compute resources under endpoint, vRA shows no clumps.

  What happens one? I'm going crazy?   Well, maybe, but actually part of the problem is that calculation of resources are not displayed when you think, until you go to groups - fabric groups and then check the clusters that you would like to use vRA.  Now when you navigate to calculate the select cluster resources will appear.  {shakes head and face Palm}

  The lesson is, so don't forget the section group of fabric with the addition or subtraction of compute resources.  In addition, it is perhaps orphan computing resources in the database.  The following KB may help solve this problem.  VMware KB: deletion of an endpoint in vRealize Automation fails with the error: the endpoint is used by comput #...

  Hope this helps some that can run into questions adding vCenter endpoint computing resources.

  Hey Sean,

  OK on one of my IIS servers

  At the level of the server host level anonymous authentication is the SSO is enabled

  Move forward in websites - Site by default - Windows authentication is the only thing allowed

  For the repository - anonymous and authentication Windows are enabled

  for the vcac - forms authentication is the only permit

  For the WAPI - anonymous and Windows authentication are enabled

  Who help me?