Problems with my slower... graphic AGA and external monitor does not display

Similar Questions

• No luck with CRT/LCD button - external monitor does not display

  Hello

  I have a Dell Inspiron 700 m laptop.  When I connect to the computer to my TV (a/k/a an external monitor), hold down the "Fn" key and press F8 (the "CRT/LCD" button), my laptop screen blinks and no picture on the external monitor.  One of my friends has a Dell XPS M1210 and - through the same steps - we were able to get the same establishment to work.  Maybe someone has any suggestions for what is the problem?  Would be - it simply a matter of obsolete or incorrect drivers?  Thanks in advance for the help and suggestions.

  Kind regards

  Aranas

  P.S. to the difference of the XPS M1210, my Inspiron 700 m does not display again - when I press the key "CRT/LCD" - the box with three display options: integrated screen external monitor and both screens at the same time.  The screen just flashes to black.

  
  

• external monitor does not display full resolution-_-

  I have a 22.5 in. monitor benq screen 1920 x 1080, but my computer thinks it's a 13.9 in 800 x 600 screen.

  I can't choose a better for the display option.  No I did not choose the mirroring.

  HAAAAAAALP

  These are the windows that show for under views for sys prefs

  

  using one of these

  http://i.stack.imgur.com/zMRsU.jpg

  The dialog box display settings are two buttons: default for display and chipped. Select chipped in the external screen dialog box. This should give you the different options that are available. You can also hold down the option key while clicking on the button of the chipped to see all options, not just the most expensive.

• Search programs and files does not work: when I try to look for things in windows 7 slot search files and program it does not display anything

  When I try to look for things in windows 7 slot search files and program it does not display anything

  Help

  Hi girls NMS.

  Try to run the next Fixit:

  Fix Windows Search when it crashes or shows no results

• I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

  I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

  This solution could not be downloaded

  --------------------------------------------------------------------------------

  The most likely causes:
  Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  --------------------------------------------------------------------------------
   
  I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

  Download and install the latest driver for your graphics card nVidia.

• Many problems with my D530 SFF, freezing and black monitor (windows xp operating system)

  First off I want to start by saying that I am a complete noob when it comes to computer repair. But since it wouldn't kill me if I lost the files on my computer and I intend to get a laptop soon, I'm willing to tinker and try to solve the problem with my office on my own. First on my cpu fan had started to get progressively stronger over the years that my HDD approached capacity. And it seemed that the computer can get more hot than the optimal temperature. At the present time, I think the hard drive is completely filled and maybe ultimately causing my problems. Periodicly, I started getting messages that my virtual memory is too low and that the system could make more room. Now I clean a bit and delete files to make more room. A year and a half, this computer has not connected to the internet that last week I hung it and installed a bunch of updates automatically from windows (seemed to run more quiet and cooler). I also deleted bitdefender and malwarebytes and installed Avira. At the beginning everything worked well for a few days (some lag sometimes, but he had been trolling for a while) and that one day I left the system and did things around the House. When I came back my computer was powered down on its own. When I tried to restart led lights up and the fans and cpu but my monitor does not receive a signal. I turned the computer off checked cords, get rid of the dust in the case and that I tried to restart and got the same thing. After that, I pulled the ram and clean the slots and riser and the cd player and I tried to reboot after the installation. If I remember correctly this time the monitor received the signal, but the system froze on the start menu to hp. After that I stopped and restarted the monitor could not receive the signal. At this point, I decided to leave the 'thing' sit overnight and try again in the morning. I have two-way to ram and Board riser with those of d530 my father and got the same results. After about 6 hours or so I started the computer today and was able to start windows, but when I tried to access the control panel the system froze.  Initially, I thought that my graphics card was out, and I read somewhere else that others had similar problems when their processor is out, but the fact that windows started today left me speechless. It seems I can get liked long in the longer boot process I leave my office to sit down. What is an overheating problem?

  Hello:

  Your SFF model has two known issues. The CMT is not the power supply issue.

  1. the power supply explodes and smoke if left unplugged for a long period of time, so do not leave it unplugged. There are videos of this on the internet for your viewing pleasure (say).  I had 2 of them jumping on me. Scares the heck out of you!

  http://www.YouTube.com/watch?v=nHPf6jHdEFg

  More information.

  http://h30499.www3.HP.com/T5/business-PCs-Deskpro-Evo/HP-D530-SFF-power-supply-failure-information/TD-p/1040147

  2. the model is released at the time of counterfeiting capacitor.  The symptoms that you are desribing made the diagnosis of bad capacitors.

  Check the PC for capacitors sealed or curved around the processor and the motherboard in general.

  Here's a good article on who and what to look for. First browse the links on the left and on the right, there are pictures.

  http://badcaps.NET/pages.php?vid=2

  If you have bad capacitors, I would just scrap the PC. IMO not worth fixing - what with the bomb ticking power and everything.

  Get a dc7xxx used on eBay for less than $100.

  Paul

• External monitor does not work with Tecra M Series

  Hello

  I'm trying to connect to an external monitor, however it is not working properly. The monitor works fine with another laptop so I know that the monitor is ok.

  When I first start the lptop I get the screen then I XP Flash on the external monitor perfectly clearly, however when it will boot Windows XP the external monitor goes haywire.

  Advice/suggestions would be appreciated.

  Either way, I just updgraded all display drivers and BIOS but with no solution to the problem.

  Thank you very much in advance for all help/tips.

  King Tony

  Hi mate,

  my suggestion is to reduce the resolution for the external montor. Maybe you have the problem that the resolution and frequency h/v is not defined as it should be.

  When starting your laptop, then let the disconnected monitor. When the machine is running, then connect the monitor to the machine (it s OK, it s not dangerous or something) and then go into the control panel for the graphics card. There you can set the options for internal and external monitor.

  Set the minimum resolution for the outside and try to activate him. It should work normally...

  Please tell me, what kind of machine do you have? You need to give more information, so maybe other people with the same machine can help you.

  Welcome them

• Explore Windows 7 64 bit slow loading screen and windows welcome does not

  Hello guys :D

  I had this problem yesterday and look really weird because I use several method to solve for 'Blocking with the Welcome screen' or 'Windows Explorer is not responding. So here's the problem:
  As I said, I had the windows with the "Welcome" screen stucks But some time later, about 15 minutes that it full load. Well, THIS IS more BIG PROBLEM: my office was black with my cursor! About 10 minutes, this return to normal, BUT the icons are not loaded. And when I click on any folder or right click of mouse, WINDOWS EXPLORER IS NOT the ANSWER (error status code c0000185 InPageCoFire) and need to restart. I restart and once again, does not. My laptop is now like that, turn on, wait 15 minutes and watch "Windows Explorer is not responding" and turns off.
  It makes me really mad. So I really appreciate for your help. Sorry if this question was asked before

  Uh, seems to be still the gel, you can try another way! Enter again the Advanced Boot Options, then choose 'Safe Mode'. Your loading windows basic drivers and services that could help you get into the windows desktop without encountering any problems. Once you're in safe mode, tap Start menu and search for "cmd". Right-click on 'cmd' and select them "run as Administrator". When the command prompt appears, check your disk file system error hard by typing "chkdsk c: /f" (do not type the quotation marks) if "c:" is a drive letter on your Windows 7. Restart your computer, and it checks file system of the disk for errors. When the analysis was finished and reboot, re-enter the Advanced Boot Options, choose "Safe Mode" again. And then open command prompt with administrator, and then type this command "sfc/scannow" (do not type the quotation marks). SFC (System File Checker) can check your file system were healthy or not. Wait until after the analysis. Then, restart your computer. If these tips don't help, update your status question. :)

  

• Mobile profiles (phone and Tablet) screen does not display does not correctly

  RoboHelp 11 on a Windows 7 machine

  I have a small project that I asked in August and just pick it up again today. The only changes that I made today have a background color in the selected schema and adding browsers to the Profiles screen (mobile phone, desktop),. I also changed the pixel size of screen above and saved profiles, but eventually changed his mind and changed their return. I don't know if it would make any difference to this problem. (When I did size changes HR told me to update media queries, but I do not use all... or at least none came in functionality to handle media queries.)

  Then I re-generated output, but the Tablet and phone screen sizes are does not display correctly when I tested it by changing the size of my browser - there is a browser size quite large "dead zone" where no content is displayed at all (which almost makes appear as the 'sensible' part of the output does not work), inland navigation (front and rear bar and buttons) is pushed upwards in the header bar , and no horizontal browser scroll bar appears so that I can scroll to see the edge of the large images. I mainly use IE but it happened as well as Firefox and Chrome. The desktop display seems to work very well. (I'm sorry I have no screenshots now - I can provide some if necessary.)

  I was wondering if it had something to do with my chosen 'model' but a new project that uses that even a (Theme1_Standard) had no problem. Now, I also noticed that the model seems to have changed since I was last in Robohelp, because the overview of model unchanged today was not the same as the model from August. The Readme file for the latest patch does not mention everything that I thought that seemed to be related.

  As I said, I changed were all one color, browsers display profile and the profile screen sizes which I subsequently put discarded. I'm completely at a loss as to what caused this and how to fix it. I feel like an OAF comprehensive because it seems to be related to something I * DID * but back on my steps gave nothing.

  Thank you!

  UPDATE

  Still having this problem, but in poking around I discovered that some of the program files on my local machine have been updated in mid-September (when it looks like ReadMe file in the last patch was installed on my computer) and others have been updated mid-October (the first time I was in HR since mid-August, so anything is a not then generate). I don't know if this means anything, but to me it seems slightly suspicious. THX.

  I tried to reproduce the problem, but I can't get the the problem you describe. I do not have a dead zone and wide content scroll correctly.

  The screenshots are pointing to the former route Theme1, so there may be a problem here. Can you please try the following:

  • Delete the layout of your project.
  • In Windows Explorer, navigate to the folder! ScreenLayout! in your RoboHelp project and delete the Theme1 folder.
  • Claire the! SSL! folder.
  • Clear the DPC.
  • Remove the output that you previously generated to ensure that no old file remains.
  • Open RoboHelp, add the layout and generate without making any changes? It's working now?

  Just to be on the safe side, Adobe has released a fix for HR 11.0.3 that some sensitive issues in layouts, however not correct the issues identified in this thread: questions in RoboHelp 11.0.3

  Kind regards

  Willam

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Problems with Satellite A300-1 b 0 cooling: fan does not stop

  Hello users,.

  I m new on Linux and Ubuntu, I installed ubuntu 8.10 last week;
  All things are ok, ok start menu because I have XP, network ethernet connection and wireless, updates ok, ok packages!
  just one thing that make me "' it's my laptop fan, I explain:
  He turned on since I have connection ubuntu and it will be off only when that I disconnect "shutt down" my laptop, so it never stops until the

  the use of ubuntu, because with xp there start but if the processor is cold it is stop! and restart and etc...

  So if anyone has an idea, you are WELCOME!

  My laptop configuration:

  Satellite TOSHIBA A300-1 b 0
  Processor: core 2 duo T8100 2 .1GHz of
  RAM: 3 GB
  SATA hard drive
  Marvell Yukon 88E8040T Ethernet
  Intel wireless

  and I have the patched with the latest bios of the toshiba site
  Date of the bios 07 2008 v3.7 blistering

  > The use of Ubuntu, because with XP there start but if the processor is cold it is stop! and restart and etc...
  If I understand correctly using the Win XP the fan does not always with some breaks. Is this good?

  This isn't a problem but a friend feature.
  As you know the GPU creates a lot of heat.

  This is why it is important that the fan is way on and to cool the GPU or CPU if the temperature reached and some point.
  I put t know what temperature must be reached, but it cannot be too high due to overheating problems.

  Second graphics driver Toshiba control the performance of GPU and the dissipation of the heat too. If the temperature rises to a critical level (applications executing heavy performance) the diver decreases performance to ensure that the heat dissipation would come down.

  But this happens only if the cooling module will not be able to cool the internal temperature.

• Satellite A215-S4747 (internal and external) microphone does not work

  Hello

  I write about my wife by Satellite A215-S4747 running Windows XP.
  A few months ago as the built-in microphone and external microphone has stopped working.

  This made me think it was a driver problem, although no issue in
  Control Panel > sounds and Audio devices > equipment for all drivers.

  I went through the Troubleshooting Wizard, but that did not help.
  I went and downloaded drivers RealTek HD Audio (R2.67), but that didn't fix it.

  Any help is very appreciated.

  Thank you

  Peter

  I want to emphasize that this machine is about 6 years old, making the possibility of some parts break most likely...

  Hello

  Sound works. Right? Well well, in that case I n t think that it is an audio driver problem.

  First of all, I think you should check some basic settings.
  (1) mic device.
  Go to the control panel-> sounds and Audio-> Audio-> sound recording devices
  Here you check if device right microphone has been selected

  (2) mic volume
  Go to the control panel-> sounds and Audio devices-> Audio-> audio-> Volume
  Here you check if the volume is at max level
  Additional button Advanced should be available at the bottom of the mic volume control click that it and check if the mic push in checked.

  Have you installed some tools or software which may affect (disabled) the microphone?

• With recent updates, restoring with restore points is more and now IE does not work properly.

  I just had a few security updates for my machine and now there is no restore points, restore reports again that restore points are invalid, try another date of restoration (I'm guessing on this one).  Internet Explore ceased operation (for denial of service in IE error messages).  Norton finds nothing.  Any suggestions?  P.S. I don't browse the internet, check e-mail, or any other activity on this machine and only play an internet game on it.  Any suggestions or helpful hints before moving a complete system recovery disc?

  You used the word "n" and system restore in the same paragraph.  It's a good sign for boredom.

  Here are a few known issues in SR and Norton, you can read and see if they will work for you.  It is possible that your SR will never work unless you reinstall the system restore (not XP - just the system restore part) which would mean you would lose all your old PHI from scratch with new RPs.

  I can't help you with your IE, but if you provide the following information, maybe someone else can.

  SR already worked successfully for you in the past?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your version of Internet Explorer?

  You have a different browser like Firefox or Chrome that operate and is only IE afflicted?

  See if IE will work if you click on start, programs, accessories, System Tools, Internet Explorer (No Add-ons).

  What is the exact error that you see when you try to use IE?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.

  I would like to deal with the problem as if there was no such thing as the system restore, fix your other questions, stabilizes, then get your SR works after that.  Certainly, it should work well, but I wouldn't count on it as a way to solve problems.

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• How can I download the new update on my Macbook pro when the password is not working? When I connect to the Adobe site with the same user name and password it DOES not work. I don't understand why.

  So I have a macbook pro - and she advised me that I had to update my Adobe flash player. So I go through all the steps and I'm stuck at the last stage, where he asks me my user name and password. I go in there correctly - several times and it does NOT connect. He shakes to show that there's an error. Double check my file AND I go to the Adobe site to connect with the same information. and it works very well.

  WHAT IS THE PROBLEM? Help please.

  Could you please try ComputerName administrator as username and the password as password.

  I hope this works.

  Concerning

  Hervé Khare