If CentOS 6.4 is supported by vCAC 6.0?

Similar Questions

• Error when you try to run vmplayer 7.1.2 on CentOS 7-"could not open/dev/vmmon: no such file or directory."

  I am looking for working on CentOS 7 vmplayer.  I ran the .bundle as root and then when I try to create a VM it fails on with the error "cannot open/dev/vmmon: no such file or directory."

  CentOS 7 is not supported?

  In my research, I did not see any fix.  I think he just doesn't...

  vmplayer 7.1.2 works for me on CentOS 7.

  The problem was the secure boot must be disabled in the BIOS.

• Can I install Adobe Media Server - 5 standard for Linux Centos 6 AMS?

  I would like to know if I can install standard AMS 5 on Centos 6? And if so which version would be better?

  I see that Amazon EC2 running a version of Adobe Media Server 5 on a Centos 6.3 operating system. So, it must be possible, right?

  I tried to install AMS on 7 Centos 5 but have not been able to get HTTP Dynamic streaming to work properly, so don't want to stuggle again, but I won't be stuck with Centos 5 more that I can't run the latest version of PHP or Lee there.

  Please can someone explain if this is possible?

  Yes AMS works on all 6.x CentOS... CentOS 7 is not supported... We always encourage you to use the latest version of AMS which is 5.0.7 as to date.

• VMWare converter hangs on RHEL/CentOS 2 and 3 guests

  I tried this on three different hosts and in each case the vmware converter starts ok, then eventually it simply crashes.  I logged on the source host to see what was going on and noticed that it crashes there is no vmware running process, whereas before I was able to see the vmware converter process, but also the tar of the process which has begun.

  Any suggestions?  This product don't feel really as it is completely "cooked", at least on the side of things Linux.

  I really don't understand why rsync would be a faster, unless you were synchronizing after an initial copy.

  I don't know why you have to do all this hack later.  I fear systems that you are having to do this on the 2.4 kernels, which are basically not supported (read as "will not work"), except for explicitly RHEL 2.1, which we specially deal.

  CentOS is generally not supported (read as "not tested, no guarantee it won't work at all, no promises of any assistance, good luck").

  That is all listed in the release notes: http://www.vmware.com/support/converter/doc/releasenotes_conv401.html#guestos

  But many people have had success with CentOS, and they have not needed to play with the initrd, grub, etc..  This is a very large part of the value provided by the Linux P2V functionality, so have to do it yourself sucks.  Can you give me the versions accurate that you are having to do with?

  Honestly, if you do all that cold converter Clone CD (available as part of the converter company releases) might be a better approach because it allows to copy disks completely, you will lose any LVM and won't have problems with 'magic' confusion of tar files. But for the record, the cold Clone CD does not support provisioning.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Resize the size of the disk on a virtual machine

  Hi all

  I have a virtual machine with 200 GB, would reduce the size of the drive for 100 GB?

  OS: Linux CentOS

  VMWARE ESX4.0

  VMware vCenter Converter Standalone 4.3 can be used to resize Windows and Linux powered sources.

  Although CentOS is not officially supported as source for Converter 4.3, RHEL 2, 3, 4 and 5 are so you could work with CentOS as well. No promises though, as it has not been tested and officially not certified.

  See page 52 of the Converter 4.3 Admin Guide at http://www.vmware.com/pdf/convsa_43_guide.pdf for more information.

• UnsatisfiedLinkError exception loading native library: njni10

  Hi all
  Get this error:
  
  $ $ORACLE_HOME/bin/netca
  UnsatisfiedLinkError exception loading native library: njni10
  
  
  java.lang.UnsatisfiedLinkError: jniGetOracleHome
  at oracle.net.common.NetGetEnv.jniGetOracleHome (Native Method)
  at oracle.net.common.NetGetEnv.getOracleHome (unknown Source)
  at oracle.net.ca.NetCA.main (unknown Source)
  Oracle Net Services configuration failed. The exit is - 1 code
  
  ***********
  ran YUM update and updated all packages...
  
  OS: CentOs 5.7
  
  Thank you

  CentOS is not a supported distribution. Search this forum for similar problems

  Problem of library with Oracle 10

  Srini

• CentOS support

  Dose Dell PowerEdge R430 support Centos version 6? Help, please

  Hello

  RHEL 6.5 to 6.8 are supported, should be the equivalent version of CentOS. http://Linux.Dell.com/files/supportmatrix/RHEL_Support_Matrix.PDF

• What is the meaning of 'Support user' in vCAC 6.0

  Hello

  I wonder vCAC 6.0 there is no 'Support user' feature where the group administrator can impersonate the user account and audit logs or other specific problems of the user.

  Is there any configuration, I'm missing, or this feature is taken out of VCAC coz I have found no information I have documentation as well...

  Thank you

  BR,

  MG

  When you connect to the portal user management, it is said in the name of in the top right box where you can choose the user you need to impersonate.

  Or by deploying the machine, there is a field that said owner where you can select any user in this group of companies and deploy the machine for them.

• VCAC 6.0.1 network IP profile for Centos Blueprint award

  Hello

  I wonder if anyone has had luck get a machine of Centos to deploy from vCAC and be given an IP address on the network profile defined in vCAC? I managed to get this working well on Windows Server 2008R2 action plan, but can't seem to make it work on Centos.

  I followed a few guides out there that has gotten me to the point where I can join the Centos template customization of comments if the guide is for deployment via vCenter and requires manual intervention for the customization of work (you set the IP address in the customization, and then edit the material virtual and remove/re-add the vNIC) which is the kind of thing that would not be easy to imitate behind vCAC.

  See you soon,.

  I believe that the solution of the cleaner to keep me, had to start the virtual machine with no NETWORK card at all and delete configurations in sysconfig and then he can go back. I then added the NIC back in before I put him as a model.

• ESXi 4.1 U1 does support Centos 6 under VM now?

  I installed centos on ESXi 4.1 U1 6.0 and vmware workstation 7.1.4, both have the same problem. There is no error during installation, when it first starts, there are ' TARS: Hotplug not continuous area.» Partially ignored"error message on the screen and then come to the login screen, but there is no network.

  ifconfig find only loopback NIC, can someone tell me how to set up the network and access its GUI? (Or esxi 4.1 U1 currently does not support centos 6.0 as VM?)

  Thanks for the reply

  Hello.

  CentOS 6 is not suppored as a guest on Workstation 7.1.4 or ESXi 4.1 U1 operating system.  You can check with the HCL.

  Good luck!

• Support centOS FT

  I checked several documents and resources, but could not find direct evidence that centOS is supported by FT.

  "all distributions ESX-taken in charge" are clearly indicated in the manual, but it specifically covers centOS?

  anyone under this OS with FT or have an experience to share?

  Thank you.

  Hello.

  I checked several documents and resources, but could not find direct evidence that centOS is supported by FT.

  Several versions of CentOS are listed in the compatibility guide available here.  If your specific version is in the list, then you should be confident that it will work.  KO 1008027 also expressly provides that "Linux (all distributions taken ESX supported)" is supported for FT.  I haven't used CentOS with FT, but between these two pieces of documentation I would not hesitate to use it.

  Good luck!

• Satellite A300 and Centos Linux - EHCI: transfer of the BIOS didn't 01010001

  Hello

  I have a laptop Toshiba A300 - 211 PSAGCE.
  It has 32-bit Vista as the operating system.

  Now, it is dual bootable Centos linux with Vista and it does not start in Centos, displaying the message "EHCI: transfer of the BIOS has not (bug BIOS?). 01010001 "and it restarts automatically, without any statement by me. "Reboot" again and again.

  The same problem appears when loading windows 7 or windows 8. With windows vista, only it doesn't have problem. The only problem with Vista is that Skype does not recognize my toshiba webcam.

  My bios version is 2.2, and unfortunately, the TOSHIBA support site does not support the model of mylaptop with another more recent version of the bios. I tried to load the new version of the bios of other Toshiba A300 model, but my phone does not support the flash BIOS.

  Please help me! It is very important for my work to solve this problem.

  I wait anxiously for any help or idea or a new version of the BIOS.

  Kind regards

  Please give me a solution as soon as possible because I can't work!

  Thank you very much.

• Satellite L500 does support VMX?

  Hi friends,

  I am using Toshiba L500 series, I installed the 64-bit version of Centos 5.3 in my computer successfully, but I want to install another version of centos5.x in the Virtual Machine box, but it was not installed, in the middle of the installation of the Centos 5.x 32 bit it was struck, then please say one, it is very important to me...

  Thanks and greetings

  Vnvs Swamy

  > Toshiba does support VMX?
  Maybe it sounds silly now but Toshiba supports own products only. With other words Toshiba must offer support for hardware and software pre-installed.

  If you use a third party software and there is a problem, that you should contact the first software company to see what they say on this subject.
  Toshiba has nothing to do with Centos 5.3 and VM box. You can call the hotline of Toshiba and ask, but I'm 100% sure that you will get the same answer.

• NI-VISA 5.1.2 outputs/farm right after launching it on CentOS Linux 6.2 PC, also blocks LabVIEW trying to create VISA constant REF for VISA Open.

  After installing 2011 LaBVIEW and NI-VISA 5.1.2 on CentOS 6.2 PC, I noticed a problem trying to use the LabVIEW vi VISA, basically it does not work for me, LabVIEW crashed when trying to create a control, or a constant for the open VISA vi.  Tried to launch VISA tools, they all start and then close abruptly.  Trace IO OR only shows a single line.

  I read however number of threads and decided to collect the system.log NOR, which is attached. (system.log.gz). I noticed a strange message here on nivisaserver:

  / usr/bin/tail - lines = 25 var:

  22 May 11:18:48 abrtd localhost: 'nivisaserver' Package is not signed with the appropriate key

  22 May 11:18:48 abrtd localhost: corrupt or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (Re: 2), deleting

  Thank you!

  MountainMan12 wrote:

  After installing 2011 LaBVIEW and NI-VISA 5.1.2 on CentOS 6.2 PC, I noticed a problem trying to use the LabVIEW vi VISA, basically it does not work for me, LabVIEW crashed when trying to create a control, or a constant for the open VISA vi.  Tried to launch VISA tools, they all start and then close abruptly.  Trace IO OR only shows a single line.

  I read however number of threads and decided to collect the system.log NOR, which is attached. (system.log.gz). I noticed a strange message here on nivisaserver:

  / usr/bin/tail - lines = 25 var:

  22 May 11:18:48 abrtd localhost: 'nivisaserver' Package is not signed with the appropriate key

  22 May 11:18:48 abrtd localhost: corrupt or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (Re: 2), deleting

  Salvation mountain,

  Thanks to attach the report system log - I think I have a solution for you :-) Let's look at some of the lines:

  890: / proc/meminfo:
  
  891: MemTotal:        kB 3894712
  
  1726: / proc/iomem:
  
  ...
  
  1784: 100000000-12dffffff: System RAM
  
  
  1807: / bin/dmesg:
  ...
  1820: RAM BIOS fitness card: 2576: [nipple] more than 4 GB of memory addressable detected.
  ...
  1838: BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
  ...
  2576: [nipple] more than 4 GB of memory addressable detected.
  2577: [nipple] this configuration is not supported.  Check the release notes for more information.

  Starting at the bottom to 2576.2577, dmesg lines had more than just the NI-VISA signature notification server. To start the system, the kernel modules OR refused to load because they detected more than 4 GB of memory addressable. But, if you look upward to the 890.891 lines, meminfo says that you have less than 4 GB of memory system, which makes it appear as modules OR don't know what they are talking about. However, if you look at the report of iomem down on lines 1726.1784, system RAM was relocated above the 4 GB limit. While your system has no more than 4 GB of RAM, part of his memory addresses beyond 4 GB, which can not use modules OR and so they refuse to load. -What happened? Your BIOS has provided a physical map of the RAM with usable over the threshold (line 1838) addresses.

  The difficulty here is simple: you must specify the kernel to reserve addresses beyond 4 GB [1] so that it won't remap RAM into a memory. Once all the RAM addresses below 4 GB, the modules must load and VISA/LabVIEW/al. should stop bad conduct.

  It seems to me that LabVIEW does not handle this situation very gracefully, and maybe you can work with Kira to file a bug report.

  [1] re: success SUSE linux and DAQmx installation; nilsdev and other missing utilities.

  http://forums.NI.com/T5/Multifunction-DAQ/successful-SUSE-Linux-and-DAQmx-install-nilsdev-and-other/...

• GPIB-USB-HS + on CentOS 7?

  Hello

  I don't know if this question is appropreate for this forum, if not, please excuse me.

  I had trouble installing the driver for the GPIB-USB-HS +. I could not see error during installation, but when I try to launch gpibexplorer, the window appears and disappears immediately with the following message:

  libnipalu.so, failed to initialize
  Maybe you need to run updateNIDrivers

  So, I did once again updateNIDrivers without any error. After the restart, he always says the same thing.

  I did it on CentOS 7 (3.10.0 - 229.14.1.el7.x86_64, 64-bit version, apparently). Does anyone have an idea?

  Hello

  According to Jason Smith in a similar discussion on the GPIB-USB on RHE 7 support:

  http://forums.NI.com/T5/instrument-control-GPIB-serial/USB-GPIB-HS-support-under-Red-Hat-7/TD-p/3235...

  The list on the web page is wrong and that you make reference to the list of hardware supported in the Readme.txt:

  http://download.NI.com/support/softlib//GPIB/Linux/15.1/Readme.txt

  We are still working to get the correctly implemented web page up-to-date. Sorry for any confusion this has caused!

  gpibtester