If I have a page on the computer and to open another page it starts outsmall and I have to type a Max to come to full page why?

Similar Questions

• I bought a used laptop. How can I clean the computer and only the program that the value of the factory. It's a dv4000 HP clubhouse with windows xp

  I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session.  How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings.  It's a HP Pavilion dv4000 with windows xp?  I have not all discs.

  Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).

  Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:

  
  

  Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .

  Do the following to reformat the hard drive and reinstall the operating system.

  1. Connect the PC to the power adapter.
  2. Close all programs.
  3. Click Start , click principally made programs , select System Restore and click on the PC recovery .
  4. When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
  5. The PC will restart.
  6. When the recovery of the PC of welcome message, click OK to continue.
  7. In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
  8. Restart the PC when prompted.

  As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.

  The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.

  NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired).  If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software.  So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.

  NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• I had to rebuild the computer and reinstalled the photos of cecently.  I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there.  How to import these?

  I recently had to rebuild the computer and reinstalled the photos.  I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there.  How to import these?

  Default LR stores all changes in the catalog file, not in the pictures. So if you have a backup of your original catalog you will need to copy on the newly rebuilt system and open it in LR. You will then need to recreate a link to the images in the catalog depending on where are your images and where the original LR catalogue think they are.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• How to stop the blue e screen to start the computer and also if you try to download anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  How to stop the blue e screen to start the computer and also if you try to download anything:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  We need numbers BBCode or Code to stop the bluescreens and utilities below will help you
  provide us information. Also the methods here can help you solve the bluescreens.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can I recover my old version of windows on the computer and use it on my old laptop?

  Original title: windows 8.

  Last year, I bought a new desktop computer Acer with windows 8 and installed my windows professional 8.1 on it!

  My question is! can I recover my old version of windows on the computer and use it on my old laptop because it was purchased with this PC AND how I to get it back?

  I am braking the rules by doing this? the original key was included with the purchase of my new Acer and I should be able to pick it up and install it on another device?

  If I can't, I'll have to buy a new one to upgrade my old windows laptop 7. I'm trying to save money! That's why I ask this question.

  Roger

  No, you cannot transfer the original license that is pre-installed on your Acer, it relates to it because it is an OEM license.

  The OEM of Windows 8 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  So, you need to invest in a new license to upgrade your laptop that is running Windows 7:

  http://www.Windows.com/buy

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• When I put the time, she can use the internet, she changes the time on the computer and returns on the internet. What can I do?

  When I put the time, she can use the internet, she changes the time on the computer and returns on the internet.  What can I do?

  Not enough information.  You have provided no context.  You don't say what version of Windows you are using and you don't really describe the situation in many details.  Reading between the lines, it looks like you have a child who has time on the Internet you want to limit.  You do not tell us what tools you use to control this limit online, so it is difficult to recommend the right forum for your post.  Please update your message with a more detailed description of what is happening and what you want to do.

  One thing that comes to mind is using Live Parental control with a Netgear router.  See http://www.netgear.com/lpc.  LPC uses the service OpenDNS (http://www.opendns.com/)

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I tried to add/remove stuff installed on the computer, and every time I try a "memory" box keeps popping up.

  Original title: Out of Memory Box

  I tried to add/remove stuff installed on the computer, and every time I try a "memory" box keeps popping up. What is the cause of this and how do I manage it?

  Hello S.M.R.TJakeman,

  In addition to the response of ramata, the link provided assistance by looking at how many programs you have running.  This could help solve, but if not please let us know what are the specifications of your computer.  Specifically the memory!

  Also, please let us know what anti-virus software you use and when you ran last analysis complete.  Did you run any malware/spyware removal software?

  "System Properties"

  Click on 'start '.

  Right click on "computer".

  Click 'properties '.

  Click on "Général" (XP).

  View the information on your screen. You are now redirected to the specifications of the complete system of your computer.  You can see the processor speed, processor type, system type, the amount of RAM installed and more. When you are finished, click the 'X' box to close the System Properties window.

  Microsoft Answers: The malware removal

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

  Please let us know status.

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• System Restore - question: the computer is not protected. Restart the computer and restoring the system running again. "

  When I run the SYSTEM restore, I get the following message: "the computer is not protected. Restart the computer and restoring the system running again. "I already did and it does not help.  I have Dell Windows XP

  Hello

  Try this link it may be useful you http://www.kellys-korner-xp.com/xp_restore.htm

  Under the heading, enable and disable the system restore... Reg fix?

  Also, it wouldn't hurt to run for malware, spyware, etc...

  Concerning

  GT4U

• Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

  When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

  Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

• I changed my password on the computer and can not find the book that I wrote on and now I cannot get into my computer account. How can I rectify this?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Start the computer in safe mode and log on to the built-in account named administrator .  You will need to know the password, if any, for this account.  Once, go to Panel > user accounts and change the password for your regular account.

  Then, restart the computer and you connect to your regular account with the new password.  If the computer has a floppy drive, you can make a password reset disk

  Boulder computer Maven
  Most Microsoft Valuable Professional