If I use my network key and plug it on my slim xbox360 xbox live wil I get

Similar Questions

• Oracle FTP adapter - possibility of using the public key and the password

  Hi all

  One needs to connect to a target SFTP server using the public key and password using the Oracle's FTP adapter. Is it possible and feasible?

  I think it's usually one of them that would be used (the password or public key).

  Could someone help me with this please?

  Thank you

  Kind regards

  Nanan

  Hi all

  We checked it with Oracle and it happens that this feature is not available in the product. It is probably considered to be an improvement.

  Hope that this update would be useful at all.

  Thank you

  Kind regards

  Nanan

• When I try to connect to my router wirelessly from my laptop and the room, he asks for my network key and I don't know what it is.

  my brother used to all our computer equipment set up and he died last year. Well when I moved and tried to get into my new place it will not allow me without a network/wpa key. I know that I am trying to connect to my router and not my neighbors because when I unplug it it's the only name that disappears from the list of wireless networks. How can I know what is the network key or even set up a new? I am a bit technologically with faculties weakened to get detailed instructions on how to help me would be appreciated, but any help would be great.

  I'm sorry for your loss. Since we do not know how your brother to set up the router, it would be better to start again just to make sure that your wireless network is secure. Reset the default router. This is usually done with the wired router (on) by pressing a small button on the back or the bottom of the router, now the button for about 30 seconds and then let go. You can find the manual on the router mftr's Web site. your router if you need it.

  Once you have reset the router to default, set up correctly:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Unable to connect to the wireless network; Request to use the function keys and the keys on the keyboard

  * Original title: wireless connection problem

  I have an Inspiron computer (laptop).  I can't connect to my wireless Internet.  When troubleshooting it says use the buttons or the function keys on the front or side of the computer to turn on my wi - fi.  How to do that? How can I activate my wireless Internet connection?  Help, please!

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I need to unlock the network key and I do not know how

  can someone tell what the key release for the wireless connection?  FN?

  Hi cakgdk

  If you are using a secure wireless network, you'll GET the key of the person who created the network.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• by clicking on a link does not work unless I have use the control key, and click. It just started this 2 days ago

  my computer is a HP pavilion. When I click a link it will beep but not connect unless I hold down the ctrl key. can someone tell me why?

  This problem may occur in the Office applications such as word. For resolution, please see the following link:

  http://support.Microsoft.com/kb/279090

  If you experience this problem in a browser such as Internet Explorer, then it might be the problem with blocker. Please disable popup blocker and try to open links.

• When I use the arrow keys in firefox to go forward and back, the cursor erases tiny pieces of letters.

  Even within this field of text that I type, everything is normal, but a back using the arrow keys (and then spacing also forward using the arrow keys as I go back to typing) deletes chunks of the text. Once I have started typing again in this area, the components are deleted to normal. This effect can be captured in a screenshot. After inspection, it seems to be a second invisible cursor, a character to the right of the cursor visible. So when the back arrow back, the invisible cursor trails that visible, destroying the text behind. When the spacing before using the arrow keys, the text gets fact sinking in front of the cursor visible.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• Satellite P10 804: cannot use the day before and the FN keys / hibernation

  Satellite P10-804. I had a virus and this has been supported by a professional. Since I can't use my Fn key and therefore cannot standby / hibernate etc. The sleep function does not work also if I use the "standby" button mode start Microsoft.

  The system just trying to go to sleep and restarts again, sometimes doing, it resets the date and time of the computer. Any help would be greatly appreciated. Thank you.

  Hello

  May I ask why you n t use the recovery CD Toshiba to restore the operating system on the P10 Sat?
  Simply boot from the restore CD from Toshiba that came with the laptop. This CD contains the Windows operating system with all the drivers and tools pre-installed.

  The installation process takes about 10 minutes. It of very simple but please note that this new facility will format the HARD drive.

  Other questions?

• 'absorbing the network address' and ' limited or no connectivity "messages...

  have a WRT54G2 router G wireless connected to the Mac (OSX) and a modem cable Comcast (Arris.model number TM502G) who tries to connect to a laptop (with Windows XP) to wireless internet. worked fine... now when it connects, I get the following "acquiring network address" followed "limited or no connectivity"... and it does not connect to internet despite the excellent signal strength. I am at a total loss... Please help.

  If you get this error message on your computer, this means that the settings on your computer is not compitable with your wireless routers settings. Make sure that the security that you use to connect to your wireless network is her even that you have configured on your router.

  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Now, check if you are able to browse Internet on your computer.

• My function keys and volume controls will no longer work. Help.

  I'm unable to use my function keys and my volume level is not displayed on the screen as before.  I think that maybe the software controlling the function keys and volume control screen is damaged or not loading.  HELP please.

  Hello

  Download and install HP Quick Launch Buttons on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

  Once the installation is complete, restart the laptop.

  OSD volume is provided by HP MediaSmart SmartMenu, so if you still don't see display, try the method in the link below and use Recovery Manager to reinstall this app - NOTE: you need at least one other application MediaSmart must be already installed, IE HP MediaSmart DVD, before you reinstall the Menu Smart.

  http://support.HP.com/us-en/document/c01868333

  Kind regards

  DP - K

  

• Moving from a static network to and auto IP network

  I'm running Vista 64 home premium on my lap top. At my office, I have a router linksys running on a static IP address. At home, I use a router linksys on an IP to auto. Windows seems not to be able to tell the two apart, he still thinks it is the router to work and I have to go the IP4 setting and set it to automatic. When I go to the Office I have to go back for the IP4 setting and set it to static and re-enter-the all the info and safety. I'm at whits end with this and any help would be great.

  I set up a network for each at each stop. Even if I select what I want, I still have to change the settings.

  The office is secure and reception is open and those affecting must be changed also.

  Hello

  Since you are using a single network adapter for the configuration of static and dynamic IP addresses, it is not possible to switch the IP addresses automatically on the same network adapter. However, you can use two network adapters and configure the static IP address on the an and a dynamic IP address on the other network card that should solve the problem.

  Alternatively, you can also use a network Ethernet controller to configure the static IP address for the office and a wireless network adapter to configure the dynamic address access to the House.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network controller and PCI simple communication controller does not

  I have a hp laptop with windows 7 ultimate 630. I tried to install new drivers for the network controller and controller of communication simple PCI but when I do I get a message that the driver has not been installed successfully. I know that I have the correct drivers to install but in Device Manager, I always get the yellow "!" next to them. How can I fix it?

  At any time.

  You are quite a nuisance.

  Here is the link for the driver you need for the player card.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5086783&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_93202_1%257CswEnvOID%253D4061%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Having good sighning in xbox live b/c I don't know parent email and password used to make the xbox clive account

  I do an update on my xbox and I need my parents to accept Xbox Live terms and Conditions, but my ex-etape Daddy is the one that has set up my account live xbox and parents information is his email and password and I and my mother do not know the password and we have no way to contact him becaused it is in a different State. If you can please help me with this problem that would be great. contact me (my mother) to the * address email is removed from the privacy *

  Hi NathanDersch,
   
  Welcome to the Microsoft community. I suggest to go to the following website and check if it helps.
  To update or change your Microsoft account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/manage-Microsoft-account#4f55f105acf140a2880183bfb075b008
   
  You can also refer to:
  Xbox support.
  http://forums.Xbox.com/GFW/default.aspx
  http://support.Xbox.com/en-us/contact-us

• Trying to get on Xbox Live using the internet connection in the hotel.

  I'm staying in a hotel until April, and I cannot lift the Xbox Live and running. I am able to connect and download content, but no matter what I do, I can not send messages or play games. I tried just using the Xbox built in wireless, using the command "getmac" and inserting another address MAC for my Xbox, and I tried to connect via a bridge on my laptop connection (that is able to take full advantage of the internet), or they did the trick. The hotel staff shows that he didn't there no blocks on the Xbox live as well. Can someone help me or point me in the right direction?

  original title: Hotel and Xbox Live

  Hi ETWilliams,

  The question you posted would be better suited in the Xbox Live Forums. I would recommend posting your query in the Forums of Xbox Live.

  Xbox LIVE Support

  http://support.Xbox.com/en-us/Xbox-Live/browse?XR=shellnav

  I hope this helps.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.