If it hurts if I delete the system per user queued?

Similar Questions

• Upon completion all of the updates is safe to delete the system (old and new)

  Upon completion all of the updates is safe to delete the system (old and new)

  Hello

  No, it's not OK to remove

  If you delete them they will be installed is no longer, will they?

  so, they do the job they have been installed for if they are deleted

• Problem with hard drive 3 TB and the need to delete the system partition reserved

  I am running Windows 7, 64-bit version.  have another hard disk of 500 GB and I bought a 3 TB hard drive and installed windows 7 on it (3 TB) fine.  But to finish install and found 3 TB hard drive showed only 2 TB of usable disk space.  does a job at home and found that before 2011, the bios of the motherboard can only support HD up to 2 TB, and in order to use all 3 to, I need to convert to GPT disk.  To do this, I need to remove the volume, but since I installed windows 7 more early, he created a score 'system reserved', I can't delete or edit, or format.  All boards to complete this (converted to GPT disk) so I can use all 3 TB of HD?   Now, I re installed windows 7 on my other drive.

  Any advice on how to convert to GPT disk without deleting the system reserved partition?

  Thank you all... Finally figure it out.  Just in case where any who need it going forward... and

  That's what I did

  Step 1.  start by using the windows installation disc 7, press SHIFT + F10 when the language pop up page, use the diskpart... command to remove the system reserved partition. and turn off the computer.

  Step 2.  Open the computer case and unplug the 3 TB hd of the motherboard by unplug the SATA her cable.

  Step 3.  Re-install windows 7, turn off the computer when done

  Step 4.  re - connect the 3 TB - DD and closed the case and power on the computer

  Step 5.  Disk management can use GPT disk.

  A lot of work, but finally did.

• printing problems so that the system has user password.

  I faced a problem in my local network print, my printer is connected with system with windows 7 and there are 7 total in LAN system, only 2 PCs have windows 7 others have XP but the problem is that system B prints the document when I gave impression system coz one test (window 7) a password , another Xp system command in the print job, but when I delete the password of user accounts on the system A, B system (window 7) gives printing correctly, if you have any solution so tell me?

  Hello

  Password sharing is enabled by default for computers of working groups. When password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer. There are two ways to enable file or printer sharing.

  I suggest to follow the steps provided and check if it helps.

  a. Open advanced by clicking the Start button, then on sharing settings Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  b. expand the home or work network profile.

  c. under the password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   

  For more information:

  Share files with someone: http://windows.microsoft.com/en-US/windows7/Share-files-with-someone

  Share a printer: http://windows.microsoft.com/en-US/windows7/Share-a-printer

  Hope this information is useful.

• When I want to download the game (the system dll user 32. dll has been moved in memory)

  When I want to download the game (the system dll user 32. dll has been moved in memory)

  Hello

  1. do you remember any changes made on the computer before the show?

  2. What is the service pack installed on the computer?

  3. What is the exact error message you get?

  4. what game you are trying to download?

  5. when exactly you get this error message?

  6. it happens only when you download games?

  Follow the steps mentioned below and check if that helps:

  Method 1:

  Certain programs may not start, and you receive an error message on a computer that is running Windows XP Service Pack 2:

  "Unauthorized system DLL.

  http://support.Microsoft.com/kb/935448

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Method 2:

  How to fix common mistakes of the User32.dll file

  http://support.Microsoft.com/kb/142676

  I hope this helps.

• I deleted the account current user which I use through, Mycomputer manage option, know that I am in this user only, please help me restore this user...

  I deleted the account current user which I use through, Mycomputer manage option, know that I am in this user only, please help me restore this user...

  Hello

  Who is the user account you have currently connected?

  Research of user in the sub folder location:

  Folder C:\Documents and settings\Users

  If you find in the folder the administrator account user, then you may need to create a new user account and transfer of records and documents to the new location

  See the link for the procedure below: how to copy data from a corrupted to a new profile in Windows XP user profile:http://support.microsoft.com/kb/811151

• Cannot delete the system Keychain key

  I have a bit of a problem to remove the keys (the keys) in the Keychain system on my iMac. Here's what happens:

  1. I go to Keychain Access and select system in the keychains list.
  2. I have unlock keychain using my admin password (the icon will change from locked to unlocked).
  3. I click on the key that I want to remove and select Remove "the key I want to delete.
  4. I get a box that says "Keychain Access tries to change the Keychain system, type your password to allow this." Then I do.
  5. I get a box that says: "are you sure you want to remove"the key I want to delete"in the system keychain? I click 'delete '.
  6. I get a box that says "an error occurred when deleting"the key I want to remove"UNIX [operation not permitted].

  I'm not able to change the information in one of the keys to the system, nor am I able to add new keys to the system keychain. My Keychain system contains 20 items - who are all the passwords either WiFis, passwords to Machines for time (which is what I want to delete) and a password to the guest account application. That being said, I would have no problem 'reset' the system keychain to default (empty) condition.

  I also have a MacBook, which does not exhibit this problem. That is to say that I can freely edit, delete and create keys in the system keychain. I followed the instructions here to back up the system keychain to my MacBook and install it on the iMac, but get an error message saying 'Operation not permitted '.

  Any ideas?

  Thank you!

  Please post a screenshot that shows what keys you are trying to change. Please do not include personal information.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

• Cannot delete the System Volume Information trash

  I am running Windows xp on a Dell computer and I recently removed the System Volume Information folder on an external hard drive after the deactivation of the restoration of the system for this drive.  I don't remember how it happened, but the said folder ended up in the trash.  Now every time that I try to empty the trash, I get an error message indicating that access to the file is denied and it cannot be deleted.  I can see the folder in the trash, but I can restore it or delete it.  Does anyone have any ideas on how to solve this problem?

  Thanks for your reply. I tried both of your suggestions, but unfortunately none of them allowed me to remove the stubborn system folder.  I had to start the computer in Mode safe, gives me full control over the folder to the trash (even though I am the administrator) and then finally was able to remove it. For some reason any Security tab does not appear when you talk about the Properties dialog box, unless you are using safe mode.

• Cannot delete the system Module

  My application consists of 2 modules. A system with autostart module and a module "classic."  I never had no problems update of the modules with the desktop so far Manager. The module system refuses to update and it is impossible to remove it. I'm stuck with an older version. If I do an uninstall via Desktop Manager, only the non-system module is removed. Try to remove the module from the system via the Options, device, application management does not work. The module is there, but a "Delete" option is not available for this module.

  Try an installation via Desktop Manager it reports as an "update", but the sysm module is not updated

  Version of the platform on my torch is 6.6.0.236.  The software version is 6.0.0.668 and my version of Desktop Manager 6.0 Bundle 2949.

  I'm completely stuck! Can not update the module of the system. It is a new problem. I have this Setup developed for several years and never had a problem like this before. It's extremely frustrating

  JavaLoader is a command line tool, it comes with the JDE plugin or eclipse in eclipse you can find it at plugins\net.rim.ejde\vmTools (where the sigtool is located as well).

  use to remove a cod file could be:
  JavaLoader u f clear codfile.cod

  check -? other solutions, this is a very handy tool to make screenshots, extract log files, load or delete files, etc.

• Domain change, deleted Local System account user. Need to c:\users\name a link to the new account 'user '.

  Help please!

  My main user account is corrupted somehow.  When I try and sign it immediately disconnects.  It is after some user account problems...

  History:

  I changed my phone from a domain to a Local computer.  This deleted my domain user account, but my files etc. are still in C:\Users\myaccountname.

  I followed the instructions here to Frederik Long:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/missing-user-accounts-after-Windows-7-restore/64c93151-dc6d-40FA-a9de-3356336f8f81

  This re-creates the user account, but it won't log in now. When I try and login it debits and then disconnects.

  Specifications of the system.

  -Lenovo T410

  -Version 6.1.7601 SP1 Build 7601 Win7Pro

  -Most up-to-date drivers

  Many would prove defective in Event Viewer... tried to fix a few elements such as Task Scheduler still having the old "Domain\myaccountname" domain as a user account to be used for several tasks, but I am now ideas.

  No point system restore not reported by system restore (unlikely, given that I remember many being created relatively recently), but maybe it's because I'm logged into a user account Admin backup.

  Any suggestions or ideas appreciated.

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  Given that your problem is a domain account, governed by different group policies, he needs to have checked whether administrative privileges have completely been provided to the local user. I would recommend so post your query in the TechNet Forums for best expertise on this issue.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps

• delete the system registry startup programs

  OK, I know I can use msconfig and windows defender to remove/disable startup programs.

  But some programs on a computer have a mind of its own and keep reinitialsing each time I restart my computer.

  I keep having to disable it process using the Task Manager. There are a dozen of programs that constantly to do this.

  the computer is a dual core 2.66gh 32-bit Windows vista. I have no disk Vista so I can't do a full reformat.

  the computer is also running emensly I suspect a slow virus. I'm unraveling this computer for a friend who has installed the wich following programs, I feel are contradictory, so I try for a clean boot and eliminate any software virus etc. these programs include;

  Spybot s & d

  malawarebytes

  SUPERAntiSpyware

  Ad-aware

  and some mcaffee widget freeware

  to name a few.

  I'm trying to install trend micro internet security total to cover the withdrawal of these programs.

  Can I remove programs in startup list via the registry using regedit in the affirmative were to do to find them. I know this might be a dangerouse exorcise, but I must try if possible.

  Help, please.

  The program Autoruns from Microsoft Sysinternals most of the registry locations where things can be started from the list and is easier than the use of regedit.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  And Yes, if you turn off the bad thing that you can completely mess up the system.

  Here is an introduction to the use of Sysinternals tools

  http://www.msteched.com/2010/NorthAmerica/WCL314

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• How do I delete the system folder in the folder of the computer [SOLVED by myself]

  

  Top quality:

  https://SkyDrive.live.com/redir?RESID=4D402F7353A7A0F6! 13318 & authkey =! AJLc-2jWpQtk3w8 & v = 3

  As you can see, it is not an option to remove this Chinese folder, it is also empty.

  I believe that I have this record of this cloud Chinese soft http://www.weiyun.com/act/10t.html?WYTAG=weiyun.portal.index service for Windows (10 TB, but I suggest only it to anyone, because it is completely in Chinese).

  The record does nothing wrong to my computer, but it is annoying and unnecessary.

  Note: I don' t have this folder on my admin user account on this standard user account.

  I found the solution...

  I use the registry editor to remove the unnecessary files, but...

  BE CAREFUL if you remove something else with the registry editor, you may damage your computer.

  In any case, open the registry editor and go to this path:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace

  And delete all the folders inside "NameSpace" - folder

  If you are not sure how to do this:

  1. Press 'Windows key' + Q
  2. Type: regedit
  3. Regedit open as administrator.
  4. Go to this folder: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace
  5. Delete all files within the folder namespace

  It's a way to train should look like (left the editor of the register, good record of the computer):

  

  Photo of superior quality: https://skydrive.live.com/redir?resid=4D402F7353A7A0F6! 13340 & authkey =! AB2uEZ0TsllRp_Q & v = 3

  If you have more question, answer, I'm not able to help you if you have a different problem.

• Windows 7: restore the system restore users

  Hello:

  I have read several other offers, but still not finding someone with whom I have the same problem.

  When I installed Windows 7, there was a user account.  Let's just call it ADMIN

  A few days later, I put other user accounts to the members of the family, as MOM and dad.

  At the end of the week, I met a problem and decided to do a system restore where I myself found in Windows has been restored to the beginning.

  The computer restores, and that's exactly as before.  There is only one account administrator.  MOM and dad cannot connect again because they do not have accounts yet when we started.

  But... when I look in C:/Users, accounts of MOM and dad are there, with all images and documents that they have saved.

  How to set up accounts of MOM and dad to connect to the old user folders?  I tried to use the same name of folder, but Windows just creates something more at the end of the file name... so it's different.

  Thanks for the help.

  You can remove stale as follows profile records. Make sure they don't contain anything of value, because the process is irreversible.

  1 log in under an administrator account.
  2. click on the start planet.
  3. type cmd.exe in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:

  RD /s /q "C:\Users\Jack."
  (Replace Jack with the name of the appropriate profile)

  If this does not work then I'll give you some more ammo.

• Errors when you create, modify, delete the upgrade userand user form

  Hello

  I get the error while trying to do operations on the user form... what they indicate. any suggestion would be appreciated.

  When tried to change the user to change the user organization, received this error. (changing other attributes works very well)

  Orchestration process moved to the step failed, and the corresponding error is - {0} []

  oracle.iam.platform.kernel.EventFailedException: an error occurred during execution of the core event handler.

  When I tried to upgrade user IOM form, received this error

  Inner exception: java.sql.SQLException: ORA-01691: impossible to extend lob IAMEXT_OIM segment. SYS_LOB0000354182C00002$ $ by 128 in tablespace IAMEXT_OIM

  When I tried to create a user received this error

  Process orchestration with the id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the stage of the action... [[

  oracle.iam.ui.platform.exception.OIMRuntimeException: IAM-2050243: process of Orchestration with the id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the stage of the action...

  Thank you

  This is related to your database and size.  Please contact your DBA with the error so they can expand the table.  You can always find the ORA code too: ORA-01691 impossible to extend LOB segment

  -Kevin