If my monthly payment fails, my apps stop at the same time?

Similar Questions

• iPhone 6 s - photo app does not allow users to take pictures and listen to music at the same time

  The repro steps:

  • iPhone 6 s - photo app does not allow the user to take pictures and listen to music at the same time

    Music app vs photo app

  (1) play a sound track in the music app
  (2) the swtich to app photo (on the "Photo" mode)
  (3) music stops

  Pandora app vs photo app

  1) turn on pandora
  2) switch to the camera on the 6s iphone app
  (3) stopping the music

  PLEASE FIX AS SOON AS POSSIBLE *.

  My iPhone stopped playing music when you take photos?

  Nothing to trouble since he was not taken in charge.

• HP DesignJet 1000 series, a bad cable rear transport stop in the same place every time?

  Hello. On a series of 1000 HP DesignJet 1050c more think that FW A.52.02, a bad cable rear transport stop in the same place every time?  It stops just to the right of each start, attached photo Center.  Do not know if it is directed to the left or right at the time; I asked the customer, but it has not yet responded.  It is hundreds of miles away with customer.  I was not there; I try to get a very good idea of what everything I need and that you need to do before I travel such a distance.

  It gets the error "check printhead path type (2).  Customer said that began as he tried to pass to 24 "paper roll of I think 36" roll of paper.  Maybe this is related to the different movements to transport would be to manage different width, but there will be an underlying problem.  (Well, I guess it does now any width.)  I read that if transport stops in the same place every time when you start, it's probably one of the following:

  1 necessary transport height adjustment.

  2 tubes of rub excessively in the channel of tubes.

  3. bad transport (Mouasher Sa'ad says that the bad capacitors once a trolley stop at the same place;) Guess it could be a bad encoder sensor but think the transport would simply jump a quarter inch or so if the case.)

  Well, guess it might be something to the top with the belt too, so:

  4. bad belt (once I had 1 too short and kept cause type 2 error - stop inches couple out right every time)

  I cleaned and lubricated all - channel rods and tubes of cursor. It worked fine for 5 months.

  Here, I simply want to exclude ideally that a bad end cable would cause traffic to stop at the same place every time.

  Thanks for any input.

  Paul

  Usually, a bad end cable will not cause you have. It could be one of the items you listed, but could also be the encoder being dirty in this place. Most of the time it's the belt as a defect in a bad belt could stop at the same place. If the sheath is a problem most of the time it stops at the opening of the left side. Also, if the tubes most of the time you can fix a bunch of heavy clear packing on the rim tape, tubes rub against and which solves the problem.

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• When using my computer, all applications and the windows are closed at the same time, got disconnected and the computer turns off as if someone stops manually.

  Original title: it's a virus that's causing this?

  It happened a few times now. While I use my computer, all applications and the windows are closed at the same time, I am disconnected and the computer is off, as if someone manually stops the computer. I turn on the computer and log in and everything seems to be okay. No data deleted, not that I could find and detect anyway. One day when I turned on the computer, it run chkdsk before doing the usual startup. I use the computer for 2 years and this is the first time, she never did a chkdsk on its own. I used Microsoft Essentials and no viruses were found.

  Should I worry?

  Hello

  You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Check if there are logs of events related to the issue in the event viewer which may help us to solve the problem of the:

  What are the information contained in the logs of the event (Event Viewer)?

• Micro security: several apps at the same time registration?

  Anyone know if it is possible for multiple applications 3rd party capture audio from the microphone of the device at the same time? I want to assure you that my app is only the audio capture. Has anyone tried detect if other applications use the microphone?

  If multiple applications can register at the same time, this could be a pretty serious security concern. See more here:

  http://www.NET-security.org/secworld.php?id=13015

  Thank you.

  A second request to try to use the microphone would get an error message saying that it is not available.

• The SD card is accessible by a BB App and Windows Explorer at the same time?

  Hello

  My requirement is that the SD card must be consulted by a BB App and Windows Explorer at the same time. But the BB app I developed is able to access the SD card only when the mass storage mode is turned off. Is this how the BB has designed or is it possible to have some logical coding for this?

  Thank you

  No, this is not possible.

• Epson 880 printer won't STOP PRINTING THE SAME DOCUMENT.

  How can I get my printer to stop printing the same document over and over again?

  Moved from feedback

  Original title: printer IS NOT STOP PRINTING THE SAME DOCUMENT.  I HAVE a COMPUTER WINDOWS 7 AND ONE PRINTER EPSON 880 and need to know how to stop it. print

  Hello Irene,.

  When the printer prints, you will see a small printer icon to the taskbar (lower-right). Click it and you'll see the files that are printing. If you view the document, please remove it from the print queue.

  If this is not enough, then proceed as follows.

  1. type Services.msc in the box Start of search and press on enter.

  2. Locate the print spooler and right click on the service and then click stop.

  3. when the Print Spooler service is stopped, go to C:\WINDOWS\System32\spool\PRINTERS and delete all the files mentioned in the record. This will clear the current print jobs.

  4. once the files are deleted, return to the Services window and start the service print spooler.

  Hope this information helps. If you have any questions, please let us know.

• When downloading to the sd card how can I stop downloading the same pictures?

  When you transfer the pictures from my card how can I stop downloading the same pictures again?

  You can delete old photos to the SD card in the device or the computer.  You can also choose the option to select only the images you want.

  Good luck.

• Not able to use mutilpe apps at the same time in Windows 8.

  Original title: Please help I can not load multiple windows applications at the same time 8

  I have a core 2 processor due

  and my version of windows 8 is company N

   

  Hi HussainMuhammad,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description provided, it seems that you cannot load multiple applications in Windows 8 at the same time.

  I have this link which should guide you in the right direction.

  Visit this link to know how to use the snap functionality of the application in Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/snap-apps#1TC=T1

  Note:
  The screen resolution should be at less than 1366 x 768 to use the feature of component software plug-in apps in Windows 8.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Reconfigure fails when adding two volumes at the same time

  Hi all

  We use vRealize ver 6.2.1 6.2.1 Build Automation - 2543390.

  We found a bug strange reconfiguration of a virtual machine. If I add a volume of hd at a time, there is no problem. But if I try to add two volumes at the same time him reconfigure fails with the message "reconfigures has not, waiting for retry.

  

  On the vRA 'Infrastructure-monitoring-> log >' error is: "machine Reconfigure failed: Machine: xxx, error: apply WaitForTask StorageDrsRecomendations_Task Enttity...» XXXX.VMDK invalid data store path.

  

  On vCenter Console, the error is: "path of the invalid data store [Cluster... vmdk]."

  

  The same error occurs using vCenter 5.5 x and 6.x

  Any ideas?

  Thank you very much

  D.

  It was a problem with DTS investment by vRA. We have identified the problem and the fix will be available in the next version.

  Thank you

  Kumaran

• I download the installer for adobe, then when I click on the desktop app I have the same installer that downloads itself [as published; was: help please ASAP - mod]

  IM on my iMac, and I download the adobe with adobe Installer, open it, type the admin password, it says inizalizing on a loading screen, then download the installer, and then when I click on the desktop app I get the same installer that will download.  I need emergency aid.

  Please tell us what Adobe application you are trying to install.

  For creative cloud please try: https://helpx.adobe.com/creative-cloud/help/install-apps.html, here is the link for to other downloads.

• Running two Apps on two computers at the same time

  I know the ability to install on two computers CC and I saw the restriction of not being able to run applications on two different computers at the same time.

  My question is, does that mean that all the two apps at the same time or cannot run the same application on two computers at the same time?

  For example, my daughter can use Flash while I use Illustrator on the same CC account?

  For example, my daughter can use Flash while I use Illustrator on the same CC account?

  # The license is for you and you alone. It is not a shared license.

  Your daughter must have its own Adobe ID and its own subscription to use the software.