If stump registers do not batch scripts

Similar Questions

• Audition 2.0 current Batch Script interrupted, do not save completed

  I'm trying prun a script on a few hundred mp3 files to increase the volume.  It's here

  Collection: normal120-economy
  Title: Untitled
  Description:
  Mode: 4
  Cancel: 1

  Selected: 0 to 6197758 scale 6197758 SR 44100
  FREQ: Off
  cmd: channels

  Selected: 0 to 6840575 scale 6197758 SR 44100
  FREQ: Off
  Comment: Amplitude\Normalize (process)
  cmd: {7EC45406-CFB6-4C54-99B9-84CE080C1914}
  1: 1
  2: 0
  3: 0
  4: 1.2
  5: 0

  FREQ: Off
  At the end:

  However, after a single file, it stops with error "Interrupted Batch Script, current save not completed" do I need to add a pause before the next file? (how) or any idea what causes the error?  Please, I have 3 000 files to do to and individually he kills me!

  To start the line

  Selected: 0 to 6840575 scale 6197758 SR 44100

  is not a very good idea, because you try to select beyond the end of the file on which you operate. If you select 6197758 in the scale of 0 to 6197785 SR 44100, then you will select the entire file. But then again, if you have selected 0 to 1 scale 1 SR44100 you reach exactly the same thing.

  If you are using this as a part of a batch file and backups do not work properly, you'll probably need to check all the parameters of format in the treatment by lots - but try to fix the script so that it seem weird first.

• Change the LV version currently active in the batch script

  Hello

  I use two different applications on my computer, and one of them should run in LV 2011, this in LV 2012. The two versions are installed and it works fine until I start the correct version of LV manually before you start the application (start and end of the required version of LV in C:\Program Files (x 86) \National Instruments\... before starting my request).

  I want to do this automatically in a command script, so basically I want to do the following:

  * Check which version of LV is currently active (last LV start version)

  * If the currently active version of LV is NOT required: change to the required version of LV (by starting LV and close or preferably do differently if someone could tell me how)

  * If the currently active version of LV is required: do nothing

  There are two problems I couldn't solve so far:

  * How to get the LV version currently active (I checked the windows registry, but I see that my installed versions of LV, and not one that is currently active)

  * How can I close LV with a batch script (or how to change the version of the currently active LV without opening and closing)

  Thanks in advance,

  Tobias

  PS: I did the same for the different versions of TestStand, by reading the TestStand system and if requuired environment variable change the version of TestStand via the command-line of the TS Version selector. It works fine, but there is no system environment variable that indicates the currently active version of LV.

  OK, this is a very informal Tip:

  In the registry (regedit), you will find the key 'HKEY_CLASSES_ROOT\LabVIEW.Application\CLSID '. This default key should contain some weird ID information.

  If you search for this key, you will find an entry for the key in the "HKEY_CLASSES_ROOT CLSID" section.

  If you have several versions of installed LV, there must be a key in the entry which will give you the path to the active version of NV. don't forget: this is the version that you have opened up to the last successfully!

  Please note that keys can change from system to System. Also different versions of LV can use different keys like "routing information" the way of the real LabVIEW.exe.

  hope this helps,

  Norbert

• How to report the ip address resolved of nslookup as a variable in the batch script

  I have a batch script that performs a constant audit 'external server' living every minute and the activity is fed into a log file. The external server is on a dynamic ip address.

  for example,.

  Logfile = C:\Logfile.txt

  echo control myserver... > Logfile

  .

  .

  [see document test/myserver.domain.com]

  However, I would like to write in the log IP address that is being tested.

  That is to say

  the my_server checking to 123.456.78.9 echo

  Could someone tell how can I get the dns to resolve address from "myserver.domain.com' as a variable in order, can I use it

  for example,.

  RESOLVED_ADDRESS = (nslookup resolution results)

  the my_server % RESOLVED_ADDRESS % control echo

  Thank you

  Hi Jimimaseye,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• How to hide the user id and password in the batch scripts

  Hello

  Can help me hide the user id and the password in the batch scripts to automate the process of running script to export and action.

  Context: In my client project does not display user id and password that's why they are looking for guaranteed way to hide them.

  Thanks for your response in advance.

  Kind regards

  Sandra.

  Sandra,

  As stated by Craig Administrator's Guide is a good option.

  Let me give you a few steps I did in one of my projects.

  Open the command prompt and navigate to the location "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client"... here you can see many see as well other utilities.

  DRM-batch-customer - credentials.exe is the one that is used to encrypt the user name and password.

  Open this in the command prompt and choose the application that you want to encrypt the password.

  then remove the username and password from command script can run it... It does what you want

• Write a batch script to import data in a database of DRM *.

  Hello
  
  I'm having a problem writing a batch script
  to import into DRM from an external database.
  This is the script I wrote:
  
  [General]
  Username = myusername
  Password = mypassword
  URL = net .tcp://usphl0mdma1: 5210, Oracle, Drm, ProcessManager
  Operation = import
  
  [Import]
  Operation = import
  InFile = TEST
  ImportLogFileName = "Importlog.log"
  AutoSave = Yes
  
  
  Can someone please tell me if I'm doing something wrong, and the best course of action will be highly appreciated.
  Note: it is on DRM 11.1.2.3
  
  Published by: 1010031 on June 5, 2013 09:43

  First, are you able to import from a DB table manually?, if it does not.

  Then I think the issue is around "InFile = TEST", I do not quite see documentation around batch import of a DB Table.

  Murali-

• Using single quotes with MaxL in batch scripts

  I have the following MaxL, I need to pass to essmsh via a batch script:
  
  run the calculation ' FIX("Member 1") CLEARDATA "member 2"; ENDFIX' on App.Db;
  
  The problem is that the single quotes cause problems when it is passed as a variable in the batch script. However, if I change single quotes to double quotes the batch script is happy but the MaxL is not valid.
  
  Please can anyone suggest how I can get this to work?

  You also try that works

  ( @echo login %USER% identified by %PASS% on %SERVER%; & @echo execute calculation "'FIX(\"Member 1\") CLEARDATA \"Member 2\"; ENDFIX'" on App.Db; & @echo logout; & @echo exit; ) | essmsh
  

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Is there a a way to "Consolidate all" using the FDM parallel batch Script?

  Hello
  
  When you run the BatchStdParallel script in FDM, the lngProcessLevel will take place in the consolidation, but it's only "consolidate" in HFM. I would like to know if there is a way instead "consolidate all With Data. Does anyone know if there is a way to do this?
  
  Here is the part of the script. Any help would be greatly appreciated,
  
  Dim BATCHENG
  Set BATCHENG = CreateObject ("upsWBatchLoaderDM.clsBatchLoader")
  BATCHENG.mInitialize API, SCRIPTENG
  
  ' Initialize variables Variables
  lngProcessLevel = 10 ' top consolidate
  strDelimiter = "_" ' delimiter in file name
  blnAutoMapCorrect = True ' automatic Correction of the card is on
  lngParallelProcessCount = 2 ' the number of parallel processes (must equal the number of processors)
  strLoadBalanceServerName = "MCK120" "server load for a parallel balance

  Check your settings for integration. The strengthening method is not specified by the batch script.

• batch script?

  Hi people. I need a script that I wrote on all files in a given folder. How can this be achieved?

  I thought batch, but the menu file > > automate > > lot... works only with actions, not with scripts.

  Thank you very much.

  Save a new action that calls the script, start a new recording and paltte action fly select then "Insert Menu Item" file - Scripts and select your script, stop recording. You can now use this action in the batch.

• batch script problem

  Hello
  I have an ODI package that runs a batch script. This package works very well in development. When I moved the package to the Prod, it fails. I checked the command line batch script running. This works. But not when I run of ODI with the error message ' OS command retruned 1.
  
  Not the slightest idea why this coukd arrives
  
  -app

  1.) are the physical patterns pointing to the correct file-based system
  2.) is the user who started the agent have execute script permissions?

• can not find script file "c:\". WINDOWS 32\system\system32.db»

  can not find script file "c:\". WINDOWS 32\system\system32.db»

  Hi bushra2000,

  Provide us more information on the issue:

  · You receive this error during the startup process?

  · You receive this error message when you work with an application or a program?

  · You have security software installed on your computer?

  · What is the service pack installed?

  Virus scanner to check that there is no virus or malware on your computer activity. You can check the link for the following online antivirus scan: http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• can not find script 'C:\WINDOWS\system32\ubais.vbe' file

  When I start my computer I get the following message "can not find script file"C:\WINDOWS\system32\ubais.vbe". What should I do?

  Hi Abraham Varghese.
   

  Run a full system virus scan and malware scan to check any virus or malware cause this behavior.

  Do a full scan of the system with the Windows malicious software removal tool and search for malicious software present on your PC.

  Microsoft Windows Malicious Software Removal Tool to help remove specific prevalent malicious software from computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000. After you download the Microsoft Malicious Software Removal Tool, the tool runs one time to check your computer infections per prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove infections it finds. Microsoft releases a new version of the tool each month.

  Check out the link for more details below:

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000

  You can also use the Microsoft security scanner to perform the scan your system online.

  Check if this helps you resolve this problem. Keep me updated on the status of the issue.

• delete the printer driver by political group or batch script

  I am migrating our server F & P from 2003 to 2008.  I created all of the printers in server 2008 and tested, and they print correctly.  Test the issue I am running is this: I can add the printer Server 2008 for fine local workstation, but users are unable to print the new queue.  If I go ahead and deleted the printer and remove the driver completely and then add the printer on 2008 server works very well.  So, I'm looking for a way to remove printers and drivers of each workstation via Group Policy or batch scripts to make my life easier.  Thank you.

  Hello

  Given that the problem is related to the windows server, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• How to compress files after backup is finished in batch script

  Original title: files compressed
  How to compress files after backup is finished in batch script

  Hello

  Thank you for visiting the Microsoft answers community site. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows 7 Scripting forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

  I hope this helps.

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.