Equium A100 stops or crashes when I connect a USB device
I'm getting desperate now, but whenever I connect a USB device that is powered from my laptop IE sitting navi or mobile phone or ipod the thing just lock up or stops.
All ideas will be very welcome; I checked issues of battery and made sure that my diet is in order but am at a loss!
The same thing happens with all the USB ports? I also use several external devices using the USB ports, but everything works OK. Have you tested with USB?
Your preinstalled laptop comes with a recovery image?
Tags: Toshiba
Similar Questions
-
Windows XP SP3 system crashes when you unplug the USB device
the user has a laptop Dell Latitude D630 under Windows XP SP3. In the last 2 weeks, the laptop started to hang when it unplug a USB device. Click on the system tray icon to remove the device but the system gives breaks down. That's all the info I have at this point. What should I look for? Does anyone have ideas on how to solve? Thank you.
How to crash the system?
What is a blue screen crash?
If so, it can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
Equium P200-1ED is capable of powering connected on USB devices?
(1) possibly associated with my previous question - what is someone able to confirm if the Toshiba Equium P200-1ED is able to power external devices connected via its USB ports?
(2) all 6 USB ports can supply simultaneously 6 external USB devices?
What's wrong?
Please notify.
I assume you ask again for advice related to this issue:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=115026#115026To my knowledge, all USB ports supports the USB standard and provides 500mA.
But sometimes a USB device requires more than 500 my and then you will have to use an external power supply for the USB device.Sometimes it s advisable to use a USB hub that supports clean power.
(2) can all be used 6 USB ports to power simultaneously 6 external USB devices?
As I said, the external USB devices possibly some 3rd would need more like 500mA and in this case, you must use an external power supply to USB devices.Good bye
-
ADSL modem disconnects when I connect another USB device
I access internet through an ADSL USB modem. If I'm connected to the internet and plug an another USB device, such as the docking station for my PPC or printer, the internet connection drops and I get an error indicating that the modem or another connection device can be used by another application, or there is an error and it takes several minutes and usually a couple of "made up" to get internet.
Is this a problem with the management of USB or is this normal? All devices are plug n play and installed before this error. Usually, I connect the modem to the back and other equipment on the side.
Hello
It really looks like a USB power management issue.
I found this very similar topic:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17783&MessageID=65434Turning off power safe mode solves this problem.
-
Original title: USB 2.0
I get the message "this device could better work with usb 2.0", how do I change 1.0?
I get the message "this device could better work with usb 2.0", how do I change 1.0?
To answer your question directly: you replace with USB 1.0 (most likely USB 1.1) USB 2.0 by the purchase of new equipment.
If you have a desktop computer, you can buy an internal with several Sockets USB 2.0 card.
If you have a laptop, you can get a card with 2 ports USB PC Adapter 2.0
Before you buy anything, however, if you have a desktop computer, it is possible that some (but not all) of your taken USB is 2.0. Open the Device Manager (start > run > devmgmt.msc > OK), click on the + sign next to the category "Controllers of Bus USB" and watch the 'Host controllers' listed there. If any host controller is 'enhanced' then you have at least one (and probably 2) USB 2.0 taken somewhere on the computer.
-
When I connect the USB and LAN cable does not my trackpad
Hey guys how are you.
When I connect the USB and LAN cable does not my trackpad
How can I fix this error. Please teach me.
Which macbook model do you have?
a USB mouse still works?
your keyboard still works?
No matter which USB port you use?
No matter what USB device allows you to create this error?
-
When I connect my usb modem to my pc and it is held automatically loading my pc restarts
When I connect my usb modem to my pc and it is held automatically loading my pc restarts
HelloPlease check the USB modem to a different USB port or another system.
If it works fine in another port or another system, it may be the problem with USB port.If you face the same problem. then the problem is with a USB modem,Please check with the manufacturer of your USB modem.Kind regardsChauvet J. -
Hey, I have a laptop of dell 14zxps with windows 7... I get the error code 43 problem when I connect my USB to my laptop... n this laptop is designed in a way where the battery cant b removed... Please help me on how my USB is started again here... Thank you :D
Try this.
-
USB not recognized - even when there is no USB devices at all the
For a few days now, I get the message
"USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."
He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...
Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.
I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.
Someone has an idea?
Thank you
HP Pavilion dv7 Notebook PC
LE902EA #UUGWindows 7 64 bit
I have disabled the root hubs, figured out that we caused now my mouse and other USB physical led to no longer working and that was allowed again.
The one who gave the error message is now disabled and if the error message is no longer present.
Result: (built in) cyberlink youcam and biometric no longer work. But at least the annoying message disappeared, so I guess I can live with that.
-
Equium A100 - screen turns off when I open the lid completely
I recently had a problem with my Equium A100, as when I open the lid fully, the screen turns off.
However, when the half open, the screen is completely visible.
I have attempted to open the screen and can not see loose cables to my knowledge.
Any help on how to solve the problem would be appreciated.
I agree with Akuma. It sounds like a hardware problem and probably the contact loses when you open the lid.
The cable screen should be checked and probably replaced. -
Can not navigate through wifi when hd connected to usb
This bug started with yosemite and still present in the latest version of el capitan (10.11.5). When I connect my external hitachi 1 TB touro, cannot sail through wifi.
-
Why Windows XP Pro creates another instance of the printer when I connect my USB printer,
I am running Windows XP Pro SP3. I have a HP LaserJet 1100 printer (parallel) through a parallel to USB adapter. It seems that whenever I connect the printer to my laptop, another instance of the printer is created, so I have HP LaserJet 1100 (MS), HP LaserJet 1100 (MS) (1 copy), HP LaserJet 1100 (MS) (copy 2). Only one of these printers may also appear online at the same time. Sometimes I use the laptop in a dock and connect the printer to one of the 2 station USB ports, and sometimes I connect the printer to one of the 2 USB ports on the laptop.
How can I consolidate all of these instances in a single printer so that I can have a consistent default printer? Or, how can I prevent this from happening at all?
Bruce B, Massachusetts
This happens because you have connected the printer to different USB ports. The same thing happens when you connect any device (e.g., a mouse) on different USB ports, but unlike "Printers and faxes," Device Manager shows only the devices not present ("ghost") if deliberately do you.
If having the extra icons printers and faxes you, right-click on it and select "Delete" - and then always connect your printer to the USB port.
-
ESXi 6 - unable to connect the USB device to VM
Hi people:
I have a problem with a specific USB 3 device to try to connect to a virtual computer. The device is a Toshiba USB 3 5 TB hard drive, and it is recognized by ESXi I see when I do a lsusb command, but it is never offered as a choice available to connect to a virtual computer. I tried to restart management agents, restart ESXi with the connected device so that it is immediately detected at startup. I tried using the web client to vcenter server appliance and the native client C. She just never appears as a choice just as if it is not there. Other USB 3 devices, including a Startech gigabit network device and another 2 TB Toshiba USB drive appear as a choice, so it doesn't seem to be a problem with USB 3 devices as a whole. I have connected to other computers and even an Arch Linux VM under the same ESXi which has a Startech USB 3 connected via PCI Passthrough controller and it works in all places. I tried to connect to a USB 2 port just for the heck of it, and I got the same result (invisible to virtual machines) here is what information I have via the newspapers. I see a few entries on the device being suspended in the vmkernel journal, but I don't know if it is normal for a device until it is assigned to a virtual computer.
Any ideas what is wrong or how to fix welcome.
lsusb lsusb [root@naplesesxi:/var/log]
Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc..
Bus device 004 008: ID 0 b 95:1790 6 Electronics Corp. AX88179 Gigabit Ethernet
Bus device 003 003: ID 2109:2811
Bus 004 Device 007: ID 2109:8110
Bus 002 Device 012: ID 1058:1003 Western Digital Technologies, Inc. Elements 1000 GB
Bus 007 Device 002: ID 059b: 0277 Iomega Corp.
Bus 004 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS
Bus 002 Device 003: Hub 4 ports ID Genesys Logic, Inc. 05e3:0610.
Bus 004 Device 002: ID 0781:5583 SanDisk Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@naplesesxi:/var/log]
lsusb detail [root@naplesesxi:/var/log] lsusb - v d 0480:d011
Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc..
Device descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (defined at the Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0 x 0480 Toshiba America information. Systems, Inc..
idProduct 0xd011
bcdDevice 6.07
iManufacturer 1 TOSHIBA
iProduct 2 external USB 3.0
iSerial 3 20140426016164
bNumConfigurations 1
Configuration descriptor:
bLength 9
bDescriptorType 2
wTotalLength 44
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self-powered
MaxPower 2mA
The interface descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
80 bulk bInterfaceProtocol only
iInterface 0
Endpoint descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0 x 81 EP 1 IN
bmAttributes 2
Transfer in bulk of Type
Synch type none
Usage Type data
wMaxPacketSize 0 x 0400 1 1024 bytes
bInterval 0
bMaxBurst 14
Endpoint descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0 x 02 EP 2 OUT
bmAttributes 2
Transfer in bulk of Type
Synch type none
Usage Type data
wMaxPacketSize 0 x 0400 1 1024 bytes
bInterval 0
bMaxBurst 14
Object store binary descriptor:
bLength 5
bDescriptorType 15
wTotalLength 42
bNumDeviceCaps 3
Functionality of the USB 2.0 Extension device:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) taken in charge
Feature of the superSpeed USB device:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at full speed (12Mbps)
Device can operate at high speed (480 Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Fully functional low peripheral speed is Full Speed (12 Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Functionality of the device ID container:
bLength 20
bDescriptorType 16
bDevCapabilityType 4
Want 0
ContainerID {14c4c0cc-6785-495d-8dcb-c74305d84121}
Device status: 0x0001
Self-powered
[root@naplesesxi:/var/log]
VMkernel when pluggin installed in drive 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB drive found, idVendor = 0480, idProduct = d011
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB device strings: Mfr = 1, product = 2, SerialNumber = 3
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: product: external USB 3.0
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: manufacturer: TOSHIBA
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: serial number: 20140426016164
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0x81, slot 12, new flags drop id = 0 x 0, add new flags = 0x8
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0 x 2, location 12, new flags drop id = 0 x 0, add new flags = 0 x 18
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4302ab3e2bc0
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: new context of input control:
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: exit after config context successful ep cmd:
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: name of the vendor: 0 x 0480, product: 0xd011, revision: 0 x 0607
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: Interface subclass: 0x06, Protocol: 0 x 50
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) WARNING: LinScsiLLD: scsi_add_host:573: sgMaxEntries vmkAdapter (usb-storage) rounded up to 255. Indicated size was 65535
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) LinPCI: LinuxPCI_DeviceIsPAECapable:581: device capable of EAP at 0000:00:14.0
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) DMA: 646: DMA 'vmhba50' engine, created using the Mapper "DMANull."
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb-storage 4 - 4:1.0: interface is claimed by usb-storage
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: device is not available for passthrough
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: usbfs: registered usb040b
2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > hub 4 - 0:1.0: suspended
2016-03 - T 02, 20: 04:23.349Z cpu0:32819) ScsiNpiv: 1505: GetInfo for adapter vmhba50, [0x4301a7966240], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020
2016-03 - T 02, 20: 04:23.493Z cpu5:33105) < 6 > xhci_hcd 0000:00:14.0: xhci_hub_status_data: port polling station.
2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended
2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended
2016-03 - T 02, 20: 04:34.056Z cpu6:33107) < 6 > usb-storage 4 - 4:1.0: suspended
2016-03 - T 02, 20: 05:15.869Z cpu4:162661) < 6 usb transfer > disabled
2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3551: device rescan time 9 msec (total number of 5 devices)
2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)
2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3556: refresh the time open volume 1 msec
2016-03 - T 02, 20: 05:16.150Z cpu1:162688) < 6 > usb transfer enabled; all eligible devices will be claimed by the kernel drivers
2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3551: device rescan time 8 msec (total number of 5 devices)
2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3554: Filesystem probe time 11 msec (devices surveyed 3 out of 5)
2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3556: refresh the time open volume 1 msec
2016-03 - T 02, 20: 05:16.292Z cpu2:162691) ScsiScan: 836: vmhba0:C0:T0:L0 Path supports the REPORT LUN 0 x 11
2016-03 - T 02, 20: 05:27.898Z cpu3:162776) CMMDS: CMMDSVSIUpdateNetworkCbk:2150: RECONFIGURE interface vmk3 with cmmds (success).
2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3551: device rescan time 9 msec (total number of 5 devices)
2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)
2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3556: refresh the time open volume 1 msec
2016-03 - T 02, 20: 05:28.512Z cpu4:162776) Config: 680: "SIOControlFlag2" = 0, the old value: 0, (State: 0x0)
2016-03 - T 02, 20: 05:32.679Z cpu0:162776) Config: 680: "VMOverheadGrowthLimit" = 4294967295, old value: 4294967295, (State: 0x0)
2016-03 - T 02, 20: 05:34.612Z cpu6:162983) FixedMem TPM: start = 0xfed40000, end = 0xfed44fff, 0 = write protection
2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) World: 15514: VC opID HB-SpecSync-host-9@0-3fda4c20-7-209f maps to vmkernel opID 73 a 64522
2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)
2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) World: 15514: VC opID HB-SpecSync-host-9@0-799bbb99-81-212f maps to vmkernel opID 478d4c8
2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)
Hi guys, I just had the same issue and it resolved on my test environment.
I got the device ID using "lsusb".
Bus 004 Device 002: ID 0480:d011 Toshiba America information. Systems, Inc..
where 0480:d011 is the device ID
Then ran the following command:
oddities s esxcfg-module = 0480:d011:i usb-storage
After a reboot I was able to cross the device for my VMs.
I'm not an expert in this field, as far as I can understand of this thread: problem mit USB Passthrough (eine andere nicht, geht HDD) - to vSphere5 / ESXi 5.0 5.1 - VMware Forum und "usb-storage" module crashes when you try to access the drive and does not pass through to the arbitrator of the usb. The person in this thread turns off the usb storage but I boot from USB and so I couldn't do it. Steal the idea of this thread: zero calorie tech deals: VMFS formatted USB sticks in VMware vSphere 5.1 I could exclude the USB from the usb-storage module device (I think).
I have not tested how this affects other features, but initial test is positive.
-
USB connection for USB device failed
Hello
I have VMware Workstation 7.2 in Win 7 x 64 OS later.
I want to use the USB-to-Serial Connector but my host OS cannot recognize the driver. This connector works with Win XP, so I don't think that there is a hardware failure.
Then I tried running XP machine in VMware workstation, but when I map this USB on XP VM with message
USB to USB Device "Composite Device" connection failed - driver error.
Do I need to have a good driver on host to the USB VM card operating system? or the device! mark in the Device Manager in the host OS cannot be mapped to VM? or the USB device must be properly recognized by host operating system, as the device is suitable for USB Serial device not Composite?
Any solution?
Thank you
It is a known problem in workstation 7
in some cases this can be corrected - in most cases it cannot
recommended workaround: use Workstation 6.5.5
-
System hangs after connecting a USB device in Satellite A110
Hello
I have a Satellite A110 (psab6c). Whenever I plug an ino device USB my computer it crashes and I have to put it off and then on again and remove the USB device. I looked for the drivers, but I can't find.
I use Windows XP. Can someone help me? Thank youRiledogg
I'm sure that there is a driver problem. See the manuals. It must be described how to properly use this external device.
Maybe you are looking for
-
image capture does not work with the epson scanner after macOS sierra upgraded
Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.
-
need my data lost in return?
Hello.. I had vista windows... I've never reinstall it and never to format my hard drive, it's the same as it was... I went premium... actually I got some videos and I deleted them almost a year ago... but now I need return wrong can u please help me
-
CP1700 - fault - attn: replace all four cartridges!
Hello world My printer has served me VERY well for years. I have original cartridges (all the use by date), and all test ok print heads The printer just reported all four cartridges need to be replaced Clearly, something else has all broken, or obtai
-
Hello I downloaded yesterday the BB App World 1.1.0.33 for my 8900 Javelin and just realized today that my App World icon is gone / hidden! I HAV to search all folders and it isn't here. When I checked my applications in options, it is quite there as
-
How can I remove a background image when replying to emails using windows live mail?
I have Windows Live Mail on Windows 7. I'm trying to reply to an email, and I want to remove the colored background, but not pass in plain text mode. This was easy to do it on Windows Mail, but I don't see no option anywhere to do this on WLM.