If the start of processor to consume more energy (I mean 80% or 90%) is also the pleasure of the processor starts automatically on more speed or it always run on the same speedd

Similar Questions

• Why am getting started on the internet with the message saying that more than one computer using the same ip address

  am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address

  am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address

  Thatmessage normally means a another computer on your local network has the same IP as the computer you are on.

  You control your Local network?

• Start menu Windows 7 lack of dialog box run; At the same time Star right Click of the mouse symbol does not work; more...

  This will provide some background: for several months, I had problems with Windows 7 (could not start normally, had to use the Safe Mode Networking - finally adjusted msconfig/services and began to access Windows normally - time during Safe Mode, I've resorted to the restoration of the system, tried twice, failed.) However, just 'try' restore, discovered many files, including the .dll was corrupt Restore execution.

  Currently cannot run Flash Player (current) v16.0.0.235. Exactly, I uninstalled and reinstalled several times, all to nothing done. Script errors are no longer constant, in order to be in line continues to be a nightmare. Menus in the program are not normal, just as text lists with no toolbar;  Half of my desktop program icons have the orange planet Firefox, not with the program icon or custom icon which they are responsible; the Start Menu appears now abbreviated, for example, that run the box is suddenly absent (access very important to me).

  Incidentally, I also have problems with Firefox and, above all, bookmarks in Gmail. As for the latter, I don't know if this is an integral part of I'm having problems with Windows, or as a result of the fiasco of ShockWave (Flash Player).

  Any help would be wonderful! Whether extensive or complex, step by step would be appreciated.

  Thanks in advance...

  LadyRJB

  Hi lady,.

  Welcome to the Microsoft Community Forum.

  According to the description of problem I can understand that you have difficulties running windows in normal mode, to access the computer in mode normal, you have to enter the mode safe mode with networking, perform the clean boot by msconfig to access normal mode and all your icons on the desktop has a symbol of Firefox instead of having the symbol of the actual program. Don't worry, we'll guide you to get the problem resolved.

  This problem occurs mainly because of the malware infection. I suggest you follow the below mentioned methods and check if it solves the problem.

  Method 1

  Malware scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: After running malware scan I suggest you to restart the computer, and follow method 2.

  Method 2

  Difficulty of file association

  A file association associates a file with an application capable of opening that file. More commonly, a file association, is a class of files (usually determined by their file name extension, such as .txt) associated with a corresponding request (for example, a text editor). A file association is a relationship between a file type and application of support. For example, a Word document can be associated with Microsoft Word. After removing some malware tends to corrupt the file, to your computer.

  Let him follow me fixit myself article in the article below.

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/, How to back up and restore the registry in Windows.

  I hope this helps. Write to us for assistance.

• Collection of data from more than an instrument via the same labVIEW program

  Hello

  I have a program whereby I collect data on a scale of and save the data in the text file. Now, I need to collect data of three identical scales and save the data. I wonder if it is possible to do so in the same program? I mean how to manage three ports and save three different text files?

  I enclose the current program. Communication with the scale series and I use VI:s. thanks in advance for the help = VISA)

  

  This is easily possible with a single program, and there are several ways to do so.  I recommend the following:

  1. Take data from these devices in a separate loop (this could be in a separate - VI, as well).  These loops should be state machines if you can start and stop the acquisitions in a clean way.  This assumes that the instruments are on separate ports.  If they are on the same port, you probably want to use the same loop.
  
  
  2. Write to the file in a single loop.  This, too, should be a state machine.
  
  
  3. Queues to send data from the acquisition of loops to the loop of file I/O.
  
  
  4. Use still another loop for your user interface.  It must contain a structure of the event.

  To do this, you will need to learn more about the State machines and producer/consumer architectures.  Start with the help of LabVIEW, then search these forums.  There are a multitude of implementations of State machines and producer/consumer architectures.  If you have the time, I highly recommend you learn and to use the classes in LabVIEW (requires LabVIEW 8.2 or later).  This will facilitate your work in the long term.

  Let us know if you encounter any problems...

• Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

  Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

  Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

• I have a problem with my iPhone 6 s more battery.  When he arrives less than 30% the phone will stop and will not restart unless I connect it to the charger.  Once it reboots it shows the same battery as the entry stop percentage.

  I have a problem with my iPhone 6 s more battery.  I had to 'support' from Apple telling me there is nothing wrong with the battery, I was at the store and had them test and I had two replacements and they all did the same thing, even to start the replacement up as a new phone so that there are no applications that could contribute to the problem.  I told them repeatedly it was their software problem, but they said they had never "heard of someone having this problem.  I have not updated to the latest version of the software to see if the problem still occurs and initially it didn't, but then he was back at close to 30% or less, even if there is a power adequate to continue much longer.  I've updated to the latest version because it refers to a "correction of battery problems.  Unfortunately, it makes no difference at all.  I had iPhones for many years and have always been a fan, but my next phone will be a Samsung unless Apple admit to their problem and sorting.

  When you've got additional phones you restore from a backup or set up as a new device?  If the first case, then this is probably your problem.

  Restore the configuration as a new device / phone and be on your way.

  PS None of your fellow users on these forums really care if you get a samsung and I don't know that apple will do fine without you as a customer.

• Please, I wonder if I can subscribe to more than one accout on the same desktop sync? I mean are we to multiple users to the same office, so we need some personal information.

  I and my siblings use the same office, so it is necessary to subscribe for more than a single sync account, and I don't know how. Thank you

  If each of you have a separate Windows account, then all of you automatically have a separate Firefox profile.

  If you use the same Windows account (not much privacy in this case), then you will need to create a separate profile for each of you and a shortcut on the desktop to start each profile.

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• Why the same tabs open every time I have start and open FF

  I closed my laptop every night. Use for when I restarted and opened the browser would ask if I wanted to open the previous days tabs, or start a new session of FF. FF doesn't that just as she begins just straight up with the same tabs that I looked a week ago. And when I go on the most visited link in FF and delete tabs, I want open even when they open... How can I fix it.

  This happens if your default start page in Mozilla firefox start page

  read this for more information:

  http://support.Mozilla.com/en-us/KB/session%20Restore#w_when-you-select-restore-previous-session-from-the-default-home-page

  http://support.Mozilla.com/en-us/KB/how%20To%20set%20The%20home%20page#w_restore-the-default-home-page

  Thank you

• Use 6 s more: iPhone battery is not displayed and the time standby and use are the same, even I do not use it

  Hello. I just bought an Iphone 6s MORE and just updated to iOS 9.2 and I had this problem with applications that consume my battery is to say the list of applications that drain the battery does NOT appear when I click on settings > battery. And also I meet another problem that is my standby and usage time appeared at the same time even if I SLEEP there during the entire period. Someone of you this problem? If yes kindly share here how you can solve the problem

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again.

  You won't lose data, but which can cure some problems after installing new software.

  The same use and waiting time is a sign for some applications, always running in the background, even when the phone is in standby. Restart will force close those apps.

  The list of applications appears only when you used some applications for some time.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BOOTMGR is compressed. Press Ctrl + Alt + Del to restart__But when I do the same message appears and now my netbook won't start.

  I'm not a computer whizz and now I fear I can have made a big mistake when I thought I was doing something safe.

  So here's the story, I wanted to do a little more space on my drive hard because I don't have but a small memory netbook. After the usual cleaning disc and other things, I also saw a tick box option to compress all the files and folders on the c: / drive. I checked this box and everything was fine until I stop and it works even today.

  As soon as the first image - the HP logo disappears (with instructions following key below '= change Boot Device Order' and '= ' configuration Options of the BIOS) I get a black screen with the following script in the upper right:

  "BOOTMGR is compressed"... and below, «press Ctrl + Alt + Delete to restart»

  However, when I do restart, nothing chages and I come back to the same message over and over. I think its pretty obvious that my 'sting' autour potentially screwed up things good and clean and I would be very grateful if someone knows how to solve my problem and what to do. I tried to study the question, already and so far, I think I might have to reinstall windows, but when I bought this netbook, windows has been installed for me so I did not drive. I don't even have a hard drive anyway. I also read on the windows troubleshooting pages who put the pressing F8 repeatedly until 'start it again from the last record in the point' etc options but it did not work either... unless I'm doing it wrong.

  I hope I gave enough information above so that someone is able to help. Thank you for your time and I'll look forward all the answers and I hope that the answer.

  Kirsty

  This is a popular problem with computers HP they have written an article about this (in other words, what happens often):

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01872275

  Compression is not a bad thing, but in the world where the disk storage is cheap usually not worth - you just buy more storage or maintenance disk Dome (remove things).  Compression can actually slow down the performance of your system too.  I think it's just sort of a vestige of the old days and can have negative consequences today.

  Using the HP article, you can repair your system in seconds after getting into the Recovery Console.

  There is a similar problem with systems not HP where the ntldr file may get compressed and solve it is a little different, but the concept is the same and only takes a few seconds to fix.

  You will not engage in any kind of Mode safe either.

  Enter the Recovery Console may be the biggest challenge.

  You have a genuine XP bootable installation CD?  This is not the same as any type of System Recovery CD which might come with your system.  If you do not, you will need to make a bootable CD from Recovery Console by using a system of work - or physically move your HARD drive to a system that works, repair and put back.

  Your system model number not specified there a CD player?

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony! Everybody don't like Raymond.

• For the last month or more, I had the same two updates for my computer

  original title: Windows updates

  For the last month or more, I had the same two updates on my computer.  Is anyone know why and what I can do to fix this?  I am running Windows XP.  Thank you very much.

  Hello

  the message "you have hidden the important updates" is normal, because you have hidden the high priority updates, but the updates are already installed, if that's OK.

  Try to look again at the web page:

  http://www.update.Microsoft.com/

  and click on "Custom".

  You should not see the updates (KB2518864 and KB2539631) in "review and install updates.

  You should see only "Important - you have hidden the important updates..." and "high-priority - updates non-priority updates to update for your computer... ».

  Then, try this (remove the content of the "'C:\Windows\SoftwareDistribution" ")

  1. Click Start, click run, type services.mscand click OK.
  2. In the Services (Local) pane, click automatic updates, and then click stop.
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. This place is a placeholder for the drive where Windows is installed.

  5. Ensure that Windows distribution folder is emptyand enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates, and then click Start.
  7. Restart the computer.

  I hope that we will achieve the goal, it will no longer still report the updates :-)

  LC

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.