If you drop a MV newspaper then you re-create the MV?

Similar Questions

• Error Lightroom: You cannot create the required folder

  Hello

  I have an error with the Lightroom program. I installed from application cloud creative and seems to be all right. When I open the program I get the error:

  There was an internal error. You cannot create the required folder: / users / lived / Library / Application Support / Adobe / Lightroom / metadata Presets.

  

  Report an error by CAT, but apparently there are problems and not receive messages from operators. They worked on my files internally and now have problems because the app says that some files cannot be synchronized.

  Can someone help me? Please

  Hi viviang,

  Greetings!

  There is a permission problem.

  Try to give permissions to both libraries (library system & user library) and the Applications folder.

  For the Applications folder

  ---------------------------------

  Open Finder

  On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with file applications here.

  For the user's library

  -----------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "~ / Library ' and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Made with the user here library folder.

  For the library system

  ----------------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "/ Library" and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with the record of the library system here.

  Please let me know if it works

  Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

  Concerning

  Jitendra Khatwani

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )
  

• After you have created the shotlist, how can I reformat available traditional scenario after a change?

  is it possible to reformat a shooting script in more than one layout of standard script, because...

  If you rewrite the dialogue, action, any part of the real-world scenario, then want to print in the layout traditional scenario, how?  My 106 page script became 180 pages when I started shooting script and went from there.  How can I get this back to its traditional format - no comments, shots, etc.

  We understand the frustration, and I think that I have a work around for the problem. You must use a different template (attached) so that there is enough space to fit the lines of the camera.

  • Save the file shootingscripttemplate.xml to your local disk
  • Open a film script
  • Click anywhere you want to add a
  • Go to the menu of the production, and then select Production-> camera shot
  • In the confirmation dialog box, choose the option "continue without saving a version". Click on continue
  • Enter information about the shooting, and then click ok
  • Note that the format of script has changed and your photo is displayed on the left. (see page 1 of the PDF)
  • The menu view deselect the option Unit pictures (Page 2)
  • Now, go into the Menu Edition and select Edit-> model
  • Choose 'Film' model in the menu drop-down to return to the original, formatting of the script with the plans of camera in there but not visible. (page 3)
  • Your script should now look similar to page 4 of the PDF file
  • Choose Edition--> model again and now import the model attached shooting script so that you can view the same script as the shooting script.
  • The imported model will be the automatic loading values in the model.
  • From the view menu and select the option from the camera . Your script should now look similar to page 6 of the PDF
  • Switch between templates when you want to work on the camera shots and when you do not.

  You can add the shooting script template to your favorite by designs:

  1. Switch to the display of the projects
  2. By clicking the new button on the top right of the screen
  3. Select a movie script in the menu drop-down.
  4. Click the button change the model, Page 8 of the PDF file
  1. Now, click Import and select the model of shooting script in your player. Click OK, then ok again
  2. Click Cancel
  3. The shootingscripttemplate is now available in the drop-down menu when you go to Edition-> view creating a script model.

  I hope this helps.

  -Anubhav

  Anubhav Rohatgi

  Senior product manager

• After you have created the sample application planning you see no form?

  Hi all
  11.1.2.2 hyperion planning, I recently created a sample planning an application but I do not see the forms under it.
  
  The steps I did:
  I created the planning app example
  then connect to the workspace > navigate > plan app > Administration > Application > Referesh DB
  
  I can see the types of plan created on essbase server but I see not all forms under form folder in the application I created. I'm using Oracle 11 g DB.
  
  Can someone explain why?
  
  Thanks for the help in advance.
  
  Planning data forms oracle Essbase is a problem

  For IE, go to tools > compatibility view settings, uncheck the box "sites intranet view in compatibility view.

  Try refreshing planning once again the form verification

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• You can create the title effect in Daybreakers, adobe after effects cs4, please take this one as cha

  IM considering Adobe After Effects CS4 and I found the title of the film DAYBREAKER (2009) a very interesting to create effect, I hope you can give me some tutorials on how to do it... Please! more power, NOTES: im using adobe after effects cs4

  From what I've seen on the trailer for this film, titles are a modified version of George flowing Peolvoy title tutorial posted on Creative Cow about 10 years ago. You can find the tutorial here.

  The effect on the type of glass can be reproduced using layer effects in Photoshop and / or then apply the layer effects to your text layer directly in AE. You will find a lot of these tutorials by doing a simple search on Google for glass Photoshop text.

  There is not a single click, a plugin solution, but if you integrate the effects of layer, a card of displacement, a compound blur and keyframes for position a little + blur of movement, you should be able to reproduce the effect exactly. Tutorial of George should help you get started. If I remember correctly the project files were for AE 4.1 so they probably will not open in CS4.

  Good luck

  

  Daybreaker trailer

• Problem when selecting a table after you have created the dblink

  Hello

  We have created the dblink for oracle to sql server and created successfully,

  But while selecting the oracle table, we receive the question below,

  Select * from 'sysdiagrams"@omniyat;

  ERROR on line 1:

  ORA-00942: table or view does not exist

  [Microsoft] [ODBC SQL Server driver] [SQL Server] Incorrect object name

  'sysdiagrams '. {42S 02, NativeErr = 208} [Microsoft] [ODBC SQL Server driver] [SQL

  Server] instructions could not be prepared. {NativeErr 42000, 8180 =}

  ORA-02063: preceding 2 lines of DAMAC

  Please provide us with the solution for this problem.

  Concerning

  Sham

  Hi S27.

  We had the similar problem, and I guess you went to the database MSSQL and verified that the table exists in fact.

  The problem we encountered was that we were in the wrong database on the instance of MSSQL.  I am unsure of your Setup, but if this is your case, you can try either by setting the database default to the ODBC connection to the correct on the instance MSSQL database (can be done on Windows, I'm not sure about Linux), or you can USE the command through the :

  SELECT
       DBMS_HS_PASSTHROUGH.EXECUTE_IMMEDIATE@<> ('USE <>')
  FROM DUAL;
  

  You try your select statement from the DB link.

• After you have created the encrypted table, I'm not able to view the records.

  Cheap DBA
  
  I created encrypted tablespace and table as follows.
  
  Step 1 - change the file sqlnet.ora as follows
  --------------------------------------------
  
  ENCRYPTION_WALLET_LOCATION =
  (SOURCE = (METHOD = FILE) (METHOD_DATA =
  (DIRECTORY = C:\ora11g\app\admin\AMAN\encryption_wallet\)))
  
  
  Step 2 - set the encrypted key
  ------------------------------
  Run the following at the command prompt:
  ------------------------------------------
  create a portfolio orapki - C:\ora11g\app\admin\AMAN\encryption_wallet portfolio - pwd abcd1234 auto_login
  
  Step 3 - create the encrypted Tablespace
  ------------------------------------
  CREATE TABLESPACE encrypted_ts
  DATAFILE 'C:\ora11g\app\oradata\AMAN\DATAFILE\encrypted_ts01.dbf' SIZE 128K
  AUTOEXTEND ON NEXT 64K
  ENCRYPTION USING "AES256".
  DEFAULT STORAGE (ENCRYPT);
  
  Step 4 - assign the user to the encrypted storage space;
  -----------------------------------------------------
  ALTER USER scott QUOTA UNLIMITED ON encrypted_ts;
  
  
  Step 5 - check space storage, encrypted or not.
  ------------------------------------------------
  SELECT nom_tablespace, encrypted from dba_tablespaces;
  
  Step 6 - Test of encryption.
  -------------------------
  CONN scott/tiger
  
  CREATE TABLE ets_test (id NUMBER (10), data TABLESPACE VARCHAR2 (50)) encrypted_ts;
  
  CREATE INDEX ets_test_idx ON ets_test encrypted_ts (data) TABLESPACE;
  
  INSERT INTO ets_test (id, data) VALUES (1, "it is a secret!) 1') ;
  
  COMMIT;
  
  _ Now I am interrogating the table it gave the following error
  
  C:\Documents and Settings\suresh gelda > sys/xxxx sqlplus as sysdba;
  
  SQL * more: version 11.1.0.6.0 - Production the sea may 4 08:41:39 2011
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > select * from scott.ets_test;
  Select * from scott.ets_test
  *
  ERROR on line 1:
  ORA-28374: typed master key could not be found in the portfolio
  
  
  SQL > ALTER SYSTEM SET PORTFOLIO OPEN IDENTIFIED BY "abcd1234";
  ALTER SYSTEM SET PORTFOLIO OPEN IDENTIFIED BY "abcd1234".
  *
  ERROR on line 1:
  ORA-28354: already open wallet
  
  SQL > conn scott/tiger
  Connected.
  SQL > select * from ets_test;
  Select * from ets_test
  *
  ERROR on line 1:
  ORA-28374: typed master key could not be found in the portfolio
  
  SQL >
  
  Best regards
  SG

  When you start Oracle Wallet Manager (OMG), could you please confirm if the automatic connection option is checked or not?

  Thank you
  Hussein

• VSA installed, you cannot create the cluster "VSA unavailable Cluster"

  Hi guys

  At home, I have 2 servers ESXi with a vCenter 5 virtual running on one of these hosts (I know this is not supported or the best practice, because failure of the host with vCenter, only remains of the hosts and it doesn't have the majority because of the loss of VSA service and a host). However, I think that I have an error or an obstacle not related to this.

  Also, I plan on cold migration (first storage vMotion, deleting the VM of the inventory, adding to another host) the vCenter, so this problem should be addressed in the near future...

  Currently, I have installed the Manager of VSA on the vCenter server and when I open on my client vSphere client, I get the VSA Manager tab but when I open it, it says "Loading" and then a Flash-style/VMware View management console style dialog box pops up saying "the VSA cluster is unavailable: VC Session creation has failed." with a title "VSA Cluster unavailable."

  What I am doing wrong? I can't find much documentation on the installation of a VSA, so a little help would be appreciated by a Belgian engineer VMware junior and learning

  I have enough available storage. One of the hosts I have a 160 GB SSD and 2 TB of available HARD drive, on the other a 80 GB SSD and a volume of 320GB RAID 1 presented by a LSI Logic Controller. All of them are mounted...

  VSA Manager has the same error as reported before

  2011-12-12 16:29:28, 141 338 [SessionService] [http - 127.0.0.1 - 8080-6] ERROR - cannot get the link of the extension
  org. Apache.Axis2.AxisFault: cantTunnel00: 192.168.8.23:80 HTTP/1.1 404 Not Found

  Your screenshot also indicated that vCenter is installed on port 8081. It's conssistent with the PuTTY test done before. You probably have something else listening on port 80. VSA 1.0 release requires that vCenter is Installer to the default HTTP port, port 80, which should be fixed in later versions.

• Cannot open EM after you have created the field in 11g

  Hi all
  I installed a weblogic server and created a field of the ADF. After that, I am unable to open the EM console. We are able to open the console only.
  Could someone help us solve this problem
  
  REDA

  Hi reda,.

  "em" application gets installed and deployed with SOA suite. Is that what you have installed SOA suite? If not, then you can do it and then create a domain with SOA/extend the current domain to include SOA and then try to access em.

  Kind regards
  Anuj

• Audio problem after you re-create the Image

  Obviously, I am missing a step when re-imaging a Machine under Windows Vista. I exchange the unit containing the old image with a new drive with the new image. Now at each reboot, the audio troubleshooting tool must be run. It detects the audio device, it configures a time for her and seems to be configured correctly... until the next reboot. Whenever the computer is restarted, the audio icon in the status bar appears again with the beloved red 'X'. Is this a driver problem? Thank you very much for your help!

  Hello

  See if this helps you:

  Go to your computer, or your sound card, the manufacturer Web site > looking for drivers and downloads Section > put in your computer or sound card (if you installed it yourself) model number > find your operating system > download and install drivers etc you will find Audio.

  See you soon.

• Bootcamp does not start after you have created the new partition

  Hi, I accidentally created a new partition on my mac OSX 10.11 and then discovered that my bootcamp would not start. After that, I deleted the partition but the disk for the BOOTCAMP partition identifier was disk0s5 instead of disk0s4. is anyway to fix this?

  Thanks in advance.

  The disc is now disk0s4, but when I try to boot in bootcamp, it says no bootable disc detected

• Unable to start using training camp after you have created the new partition

  Hello! I recently formatted my macintosh HD partition and reinstalled OS captain. After that, I am unable to boot using boot camp. I still see Bootcamp option in the start menu in the system preferences. All files are visible in the training camp in the finder. Please help restore the functionality of my bootcamp.

  Missgugudu92-MacBook-Pro: ~ the vikasagarwal list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 320,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 245.3 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS GOING 38.8 GB disk0s4

  5: Microsoft database BOOTCAMP 35.0 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 245,0 disk1

  Logical volume on disk0s2

  6D491581-B7A8-4B09-A171-5344C897E32B

  Unlocked encrypted

  Missgugudu92-MacBook-Pro: ~ list of cs vikasagarwal$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group C1E508BF-2029-4928-B5DA-BCC660B4390F

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 245321461760 B (245.3 GB)

  Free space: 18903040 B (18.9 MB)

  |

  +-Physical volume 790AA016-C654-48E8-BEA1-FB8377208BBF

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 245321461760 B (245.3 GB)

  |

  +--> Logical volume family AD745412-840D-45C8-8EBD-3300290AFDEE

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +--> Logical volume 6D491581-B7A8-4B09-A171-5344C897E32B

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 244950237184 B (245,0 GB)

  Exchange rates: full

  Reversible: Yes (unlock and decryption required)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Missgugudu92-MacBook-Pro: ~ vikasagarwal$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 320072933376; SectorSize = 512; blocks = 625142448

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 625142447

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 479143480 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  479553120 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  480822656 75698816 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  556521472 262144

  556783616 68358144 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  655 625141760

  625142415 32 table dry GPT

  625142447 1 dry GPT header

  Missgugudu92-MacBook-Pro: ~ vikasagarwal$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 38913/255/63 [625142448 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-625142447] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• Cannot use the Task Scheduler in Windows Vista, you cannot create the MMC snap-in

  I can't use Task Scheduler. When I open it, I get the following message:

  MMC could not create the snap.
  
  MMC could not create the snap. The snap-in may not be installed correctly.

  Name: Task Scheduler

  CLSID: FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  How can I fix?

  PS: I am running Microsoft Windows Vista 64 - bit (ENU) with Service Pack 2 (SP2) on a HP Pavilion dv5-1199eg Entertainment Notebook PC.

  Hello James-Support Engineer,

  Thanks for the response and support me.

  I received this error for a week about. Yes. Yes.

  I tried your suggestion. The problem was not resolved.

  Problem solved on 08/27/2009 by installing Microsoft Windows 7.