VSA installed, you cannot create the cluster "VSA unavailable Cluster"

Hi guys

At home, I have 2 servers ESXi with a vCenter 5 virtual running on one of these hosts (I know this is not supported or the best practice, because failure of the host with vCenter, only remains of the hosts and it doesn't have the majority because of the loss of VSA service and a host). However, I think that I have an error or an obstacle not related to this.

Also, I plan on cold migration (first storage vMotion, deleting the VM of the inventory, adding to another host) the vCenter, so this problem should be addressed in the near future...

Currently, I have installed the Manager of VSA on the vCenter server and when I open on my client vSphere client, I get the VSA Manager tab but when I open it, it says "Loading" and then a Flash-style/VMware View management console style dialog box pops up saying "the VSA cluster is unavailable: VC Session creation has failed." with a title "VSA Cluster unavailable."

What I am doing wrong? I can't find much documentation on the installation of a VSA, so a little help would be appreciated by a Belgian engineer VMware junior and learning

I have enough available storage. One of the hosts I have a 160 GB SSD and 2 TB of available HARD drive, on the other a 80 GB SSD and a volume of 320GB RAID 1 presented by a LSI Logic Controller. All of them are mounted...

VSA Manager has the same error as reported before

2011-12-12 16:29:28, 141 338 [SessionService] [http - 127.0.0.1 - 8080-6] ERROR - cannot get the link of the extension
org. Apache.Axis2.AxisFault: cantTunnel00: 192.168.8.23:80 HTTP/1.1 404 Not Found

Your screenshot also indicated that vCenter is installed on port 8081. It's conssistent with the PuTTY test done before. You probably have something else listening on port 80. VSA 1.0 release requires that vCenter is Installer to the default HTTP port, port 80, which should be fixed in later versions.

Tags: VMware

Similar Questions

Error Lightroom: You cannot create the required folder

Hello
I have an error with the Lightroom program. I installed from application cloud creative and seems to be all right. When I open the program I get the error:
There was an internal error. You cannot create the required folder: / users / lived / Library / Application Support / Adobe / Lightroom / metadata Presets.
Report an error by CAT, but apparently there are problems and not receive messages from operators. They worked on my files internally and now have problems because the app says that some files cannot be synchronized.
Can someone help me? Please

Hi viviang,

Greetings!

There is a permission problem.

Try to give permissions to both libraries (library system & user library) and the Applications folder.

For the Applications folder

---------------------------------

Open Finder

On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

Inside you will find sharing and permissions - Click on this

You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

Give read and write at all.

Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

This measure will apply privileges and which can take some time depending on the size of the file.

Once this is done, click the lock icon, and then close the get info window.

Done with file applications here.

For the user's library

-----------------------

Open Finder

Click OK at the top of the page and select 'go to folder '.

Type "~ / Library ' and press go

Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

Inside you will find sharing and permissions - Click on this

You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

Give read and write at all.

Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

This measure will apply privileges and which can take some time depending on the size of the file.

Once this is done, click the lock icon, and then close the get info window.

Made with the user here library folder.

For the library system

----------------------------

Open Finder

Click OK at the top of the page and select 'go to folder '.

Type "/ Library" and press go

Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

Inside you will find sharing and permissions - Click on this

You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

Give read and write at all.

Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

This measure will apply privileges and which can take some time depending on the size of the file.

Once this is done, click the lock icon, and then close the get info window.

Done with the record of the library system here.

Please let me know if it works

Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

Concerning

Jitendra Khatwani

Boot Camp install fails: cannot create the partition

512SSD i7 MacBook Pro late 2013

Boot Camp Assistant 6.0

O/S 10.11.2

true (paid for!) Windows 10 home

Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming)

Re-partition Mac SSD in Colombia-British Deputy with 60 GB for windows partition

Restart the system and boot of Windows Setup

Enter the key to victory, everything works fine

When you choose which partition to install windows, select 60 GB

Installer of Win said partition is not formatted correctly, so I use the formatting tool in the installer

Formatting tool seems to work but removes the volume name: it was Boot Camp and becomes Untitled

60 GB re partition - select an installer says "failed to create the partition" or something similar

Installer refuses to go forward and the only way out is to leave the Setup program

Mac to Mac o/s boots

Tried a couple of times and always the same result.

Someone has an idea what I am doing wrong? I'm just following the instructions of the Boot Camp Assistant...

This is the case, if you have any other than the USB storage and storage internal connected.

Cannot use the Task Scheduler in Windows Vista, you cannot create the MMC snap-in

I can't use Task Scheduler. When I open it, I get the following message:

MMC could not create the snap.

MMC could not create the snap. The snap-in may not be installed correctly.

Name: Task Scheduler

CLSID: FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

How can I fix?

PS: I am running Microsoft Windows Vista 64 - bit (ENU) with Service Pack 2 (SP2) on a HP Pavilion dv5-1199eg Entertainment Notebook PC.

Hello James-Support Engineer,

Thanks for the response and support me.

I received this error for a week about. Yes. Yes.

I tried your suggestion. The problem was not resolved.

Problem solved on 08/27/2009 by installing Microsoft Windows 7.

Cannot create the VSA cluster: Cluster subnet is invalid. Should not be "network address".

Hello world! I had two questions on a configuration current VSA that I'm doing for a client. Installation of urban contaminated sites brownfield version 5.1.1 = Live, running Virtual machines. Have everything configured, I'm facing 2 problems that may be a common issue throughout the community.
1. in the configuration of the cluster initial when you are ready to configure the drives of VSA, the wipeout disc around or just what has been configured space wise. My guess is he running virtual machines on the local data store that it will not write on this part but still format how much disk space has been used.
2. I received, during the vsa cluster configuration, the error message:
Cannot create the VSA cluster: Cluster 192.168.12.0 subnet is invalid. Must not be 192.168.12.0
Now, I saw the article on what it could probably be. The gateway appears and is correct. The problem is that I know that the default gateway is not the ping requests. I corrected it but have not begun installation because of the question #1 above. Since the gateway is now who responded, what would be the possible resolution. Thanks in advance to all those who support!

Hey Nate,

You're right about the behavior of the cluster wizard. It does not consume space and leave the space used by the existing virtual machines. Once that adjust you network settings (an adresse.0 may be the entry door?) You should be able to proceed with the creation of cluster.

IKE

KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

Hi dakota25,

·         Did you do changes on the computer before the show?

·         You are able to install other updates successfully?

·         You get the error message?

Follow these methods.

Method 1: Temporarily disable the security software.

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

(a) click Start, run.

(b) type msconfigand click OK.

(c) the System Configuration Utility dialog box appears.

(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

(e) when you are prompted, click on restart to restart the computer.

Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

http://www.Microsoft.com/downloads/en/default.aspx

Method 4: Follow the steps in the article.

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

You cannot install some programs or updates

http://support.Microsoft.com/kb/822798

Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

Original title: Device Manager empty

I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

Hey Harcjk,

For your first question, go through this article.

None of the items appear in the device list manager when you open
http://support.Microsoft.com/kb/311504

For the second question, here are some suggestions:

Method 1: Uninstall & install Parallels tools

NOTE: we highly recommend you make a backup of the virtual machine before you continue.

a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

c. restart Windows.

d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

Method 2: Uninstall antivirus software

If the problem persists, try the following:

Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

Note: Don't forget to install the back antivirus software, once the problem is resolved.

Method 3: Uninstall, clean & install Parallels tools

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

How to back up and restore the registry in Windows XP

http://support.Microsoft.com/kb/322756

a. If the problem persists, try the following:

b. start Windows.

c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

g. restart Windows.

h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

I hope this helps.

Kind regards

Shinmila H - Microsoft Support

Visit our Microsoft answers feedback Forum and let us know what you think.

Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

Hello.

I have Toshiba Satellite C55 - A (PSCGAE).

Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

Version 1.2.41.0 of his Studio of DTS (32/64 bit).

When I try to open this application I have error: cannot create the instance APO.

What should I do?

You need to update the audio driver (I guess that your device uses IDT HD audio card)
But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

DTS Studio seems to be already aware...

So I advise you to go to the Device Manager and uninstall its drivers Associates
After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

Cannot create the new drive and impossible to reduce c drive I want...

My laptop disk management displays the following information...

(1) healthy OEM 14.75 GB partition

(2) 200 MB Healthy (System, active, primary partition) (containing the system files)

(3) c: in good health (start-up, swap files, dump, primary) (which contains Windows) total 421 GB, free 400 GB (which contains Windows)

(4) D: sound logic GB 29 disc

I want to shrink the C drive in 30 GB and want to do at least 3 drives more. I also have linux in the D drive.

so when I want to shrink C drive, then it shows the size of available shrink space in MB 212653 and total size after shrink 219284MB. This means that my C drive will at least 219284MB. but I don't want that.

Another problem, when I tried to create a new simple volume the following error comes. You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions. What can I do?

The existence of files across the disk will limit the amount by which you can reduce the volume. You can defragment to reduce this, but there will always be property files that will create a limit for you. I had to do a full install in a 70 GB partition for Windows CE - with my first attempt to install, I could not it less than 250 GB even if I tried to partition when installing Win7 had finished.

I think you'll have to decide a complete reinstall to resolve the issues, but that's just my opinion. During installation, choose the option to partition the drive & set it to create a partition that is not less than 70 GB and Windows will install fortunately in this. You can then use the rest for a partition of data user files.

You don't mention your brand of PC, but even once, as Palcouk said, you will have some facility in order to safeguard the partition image factory of the manufacturer of the PC in DVD or USB [Dells certainly have the USB option for this]. Fix this before whatever it is that you will destroy this partition when reinstalling and might also do so just try to move partitions.

ColdFusion 10 - cannot create the database

I think that this error has to do with permissions, but I'm not sure. I'm not under personal service accounts to run IIS 7.5 or Coldfusion. There is some dirt on my server and Setup:

Server product	ColdFusion
Version	ColdFusion 10,282913
Edition	Developer
Operating system	Windows Server 2008 R2
OS version	6.1
Update level	/C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
Version of the Adobe driver	4.1 (build 0001)

Details of the JVM

Java version

1.6.0_29

History of this server:

A installed version 9.0.1. Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final. Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage. I then rebooted and again installed IIS and WAS. The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.

After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2. Web server here on out stuff is practically install stock.

I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.

Error just after the attempt to create the data source:

Connection verification failed for data source: andHalt

org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to

Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action

java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

at java.lang.Thread.run(Thread.java:662)

Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

... 13 more

Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

... more than 10

Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

at java.security.AccessController.doPrivileged (Native Method)

at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

... more than 10

= launch nested exception, level (1) =.

java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.