If you follow a link, the new window has no Navagation bar

Similar Questions

• Function mouse and keyboard disappears when you try to install the new Windows 7 on new generation.

  I have a new version with a platform of Skylake, and when I try to install a new windows 7 OS, I get to the screen installation with choice of country, etc. and have no function on my keyboard, mouse, so I can't click or tab to make choices. Basically, I'm stuck in this Setup screen. I tried with two different OS (CD), and are both the same thing.

  If you use a wireless keyboard/mouse, try switching to a wired USB keyboard and mouse.

• How open a link in a new window and keep the previous window immediately behind the new window rather than get behind other open windows of the browser?

  Running the latest version of FF (24.0) on Windows 7 x 64. While several browser windows are open if a link in the current window opens in a new window the active window moves behind one or more of the other windows instead of being originally only the new window that opens on top of it. Is there any solution for this?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

  Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• RT-20372 said backspace does not work for TextField, but if you open the new window it works

  Hello

  See this bug (registration required) = "TextField doesn't consume backspace and delete key events.

  I use this

  • Win 7/64-bit
  • last 7 + updates java to update
  • Kepler Eclipse + efxclipse

  I'm a developer of this application from https://github.com/Johnmalc/BankApp , I encountered the problem that shouldn't work. For me it works and I don't know why?

  The said bug that backspace does NOT work in the textfield. But in my case If I open a new window (concert at the scene) and then back in the new window works fine. This is my example of this controller class that is responsible for such behavior.

  class Controller {
  @FXML
      private TextField AccountNumberField;
  .......
  
  @FXML
      void initialize() {
  AccountNumberMethod();
  .........
  }
  @FXML
      void AccountNumberMethod() {
          AccountNumberField.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
  
                      @Override
                      public void handle(KeyEvent event) {
                          if (event.getCode() == KeyCode.ENTER) {
                              int AccountNumber = Integer.parseInt(AccountNumberField.getText());
                              ac.setAccountNumber(AccountNumber);
                          }
                      }
                  });
      }
  }
  
  
  
  
  

  And it is the class where I call class Conroller

  @FXML
       void NewAccount() {
            NewAccount.setOnAction(new EventHandler<ActionEvent>() { //NewAccount is button
  
                 @Override
                 public void handle(ActionEvent event) {
                      Parent root;
                      try {
                           root = FXMLLoader.load(getClass().getResource("/res/account.fxml"));
                           Stage stage = new Stage();
                           stage.setScene(new Scene(new Group(root)));
                           stage.show();
                      } catch (IOException e) {
                           System.out.println("error");
                      }
                      event.consume();
                 }
            });
       }

  So my question: which is on purpose or it is a bug that should be reported.

  You can also see my 3 files of the application here https://github.com/Johnmalc/BankApp/tree/master/src/application

  I have prepared a file zip-eclipse-so you can download it and help me as soon as possible.

  https://www.dropbox.com/s/5lxzdrg19c399q7/TestApp.zip

  Thank you. Ask me more if needed.

  @malcjohn

  Well, that said, in your controller, you event filters that consume all events events KEY_PRESSED on text fields. So it is little surprise that the text field does not have to receive some key events. It is not at all clear to me why you did it; These event filters treat only enter anyway, so why not simply manipulate the ACTION_EVENT on these controls. (If I understand it, the key events that generate text characters are managed by listeners for KEY_TYPED text fields, while for non-text characters key events are handled by event listeners KEY_PRESSED. Which is why you normally receive the regular keys.)

  Your event management is extremely complicated anyway. You register methods in the FXML to manage events, but the methods themselves define the event handler, instead of having just the event handling code. Then, you call these methods manually from the method initialize anyway. You seem to have yourself confused about management of the events of JavaFX. You probably want to read the tutorial that explains how to manage the events just by using the code Java and then read the section "add rows to the table" in the FXML tutorial to see how to save FXML event handlers. You currently have some weird hybrid of the two techniques, which is not what you think it does.

• Can't install software for HP Photosmart C4200 Photosmart on the new Windows 7 computer

  I'm unable to install the software for a HP Photosmart C4200 Photosmart on the new Windows 7 computer.  Says it's not compatible with OS.  Is there any solution for this?

  Hello

  Because the CD is not compatible with your operating system, you can download the software on the web.

  Please follow the link below for the software dowsnload Windows 7 from your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74842-1&cc=us&DLC=en&LC=en&OS=4062&product=3192753&sw_lang=

  Make sure you do not connect USB until prompted to do so during the installation.

  Shlomi

• My option "open in a new tab in the same window" has stopped working.

  After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working.  Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option.  I did as instructed and concluded that this option under the tabs was already selected and unchanged.  I changed this option, closed my browser and restarted my computer as instructed.

  As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option.   Internet does not take into account my instructions and opens my link in a new window.  This is extremely irritating.

  Does anyone have a solution?

  Hello

  What version of Internet Explorer work?

  You can try the following steps and check:

  Method 1:

  You can reset Internet Explorer 9 settings and check

  http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Important note: ignore in place update from the above mentioned link.

• Can not get the printer to print with the new windows 8

  I recently rec'd a new computer with the new windows program (8). Printer works sometimes, but not all the time. The setting was listed as offline. I can't understand how to get online. I have sharing enabled. I entered the paraphrase wireless often - sometimes it prints a doc and no mmore. Other times it does not print anything. Can anyone help.

  Hi MargieSchellinger.

  I'm glad to know that you've posted queries in Microsoft communities.

  From your description, I can understand that you can not print in Windows 8.

  I understand that it must be frustrating, but don't worry, we are here to help fix your problem and guide you in the right direction.

  Could you please answer this question so that I can guide you in the right direction.

  -What is the number of brands and models of printer?

  I want you to try the following method and check.

  Method 1: If the printer is offline, then try the following steps to connect to the network.

  With the right button of the new queue in printers and faxes tool and clear the printer offline use setting. This resets the registry key to the correct value.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution.

  Method 2: Please follow the links and instructions mentioned in the link to fix the problem with the printer.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  Method 3: Follow the link which provides instructions on how to install a printer.

  http://windows.microsoft.com/en-US/windows-8/install-a-printer.

  Method 4: To connect printers please follow the link and the instructions mentioned in the link.

  http://windows.microsoft.com/en-US/windows-8/add-device-or-pc-to-network.

  Hope the above information helps.

  Do get back to us and let us know the State of the question in the case where you need further help or your next post.

• Some Web site links open new windows with no available menu bar. How to prevent this?

  Some website have links where the menu is not available. Instead of opening the link in a new tab, a new window opens with no bar menus visible or available. This limits my ability to navigate from this new window. I want to warn these limited windows opening form; I know there is a way to do this, but I can't find the link in the support pages. Thank you.

  Type of topic: config in the URL bar and press ENTER.
  
  Confirm that you want to access this 'page '.

  'Search' This pref at the top of this window.
  
  DOM.disable_window_open_feature. MenuBar

  Double-click this pref to toggle to True.

• Firefox opens new tabs in the form of tabs first, then move on to the new windows

  I'm running FF 14.0.1 and the problem has persisted through a number of versions.

  Initially FF will open new tabs... CTRL + t work, do a right click to open in a tab etc all work fine. Sometimes the tabs are now question and I can get maybe 20 or open several tabs. And then other times we seem to be an arbitrary limit, say 5 tabs, and then each new tab opens a new window. No external link opens in a new window, a Ctrl + t opens in a new window, all new windows are the only image, for example, you can have a number of windows each tell 5 tabs, just the original (for example) window 5 and then a series of windows with only unique pages in each, and which Ctrl + t doesn't open a new window.

  A full restart sometimes heals things and I can go back to have different pages in different tabs and then something... without obvious motive... launch us in the "new window only" mode after what even if I reduce the number of tabs in the original window many tabs, Ctrl + t opens only new windows.

  He's really starting to happen to me... I have searched the technical support information and wonder about a full reset or even uninstall and reinstall. places.SQLite is verified as valid and I also, have it reindexed all to no effect.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• New tabs always appear in the new window - how to change back?

  Just upgraded to FF4. Now, when I try to open links in a new tab (by Ctrl-click), they always open in a new window. Subsequent links also open in the new window, so I have to have two windows open, rather than to have just all tabs in a single window.

  SOLVED after restarting. I could not mark my answer as a solution for some reason any.

  1. Press Alt + T
  2. Click on Options
  3. Click on the category tabs
  4. Check the option "open new windows in new tabs instead of this"

  

  Note: If the answer to anyone who solves your problem, then please mark this reply as 'resolved' right of this response after log you in to your account.

  Its because for that we can focus on new issues.

• LDIF syntax error: what is the reason of this failure when you try to import the new user

  What is the reason of this failure when you try to import the new user, followed the book syntax

  C:\Users\Administrator\Documents>ldifde-i f Newusers.ldf
  Connecting to "practice01.testa01.com".
  Registration as current user using SSPI
  Import directory of the file "Newusers.ldf".
  Loading entries.
  There is a syntax error in the input file
  Failure on line 3.  The last token starts with 'C '.
  0 entries modified with success.
  An error has occurred in the program

  Hello

  The question you have posted is related to LDIFDE with Active Directory in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://TechNet.Microsoft.com/en-us/default.aspx

• Im trying to use my dazzle with the new windows 7

  Im trying to use my dazzle recorder dvd with the new windows 7, but its does not work I did all the things he told me to do, but im not getting video or sound now

  Answer:

  Hi GRaFiix,

  Welcome to Microsoft Windows 7 Forums

  Do you have an error message when you play the dazzle DVD recorder?

  You are able to get the video and sound with the media player, media center and other third party software?

  Check if the recorder Dazzle is compatible with windows 7, given in the link below:

  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  You can download the latest drivers video and audio of PC manufacturers.

  Hope this information is helpful

  Suresh G
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• The new Windows XP Update site is broken. Can someone check?

  The new Windows XP Update site is broken. Can someone check and confirm?

  http://update.Microsoft.com/microsoftupdate/v6/muoptdefault.aspx?ReturnUrl=http://update.Microsoft.com/microsoftupdate&ln=en-us&muopt=6

  Hello

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. what exactly is the problem you are experiencing in your computer?

  2. your computer installed with Service Pack 3 is?

  3. you receive an error code or message?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP