"ignore permissions on this volume" is missing

Similar Questions

• What are the causes "Ignore permissions on this volume" to reset?

  Asking again because I'm really interested in this.

  "Ignore permissions on this volume" periodically becomes somehow unchecked in my internal memory drives, all three at the same time, and I want to know what can be the possible causes. Nothing unique or any action on my part come to mind, I only noticed because Finder is set to show all files, so hidden system folders icons have the red on their door.

  Here's the bit that evolves on its own or by me inadvertently.

  

  Did you try to boot into Recovery (R command) and run the DiskUtility > first aid on your Macintosh HD (s)?

  You can do more research, but this link Re: won't stick ignore ownership on this Volume - offers a terminal command to remove the /var/db/volinfo.database - I've not tested this.

  Always prudent to have a backup in place plan. How to create a clone of startup

  Drag a copy of the file to the desktop by pressing the option may be a good idea

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• whenever I try to, the open, Tunes, I have, get, message:, the file, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get on the past, this?

  whenever I, try to open it, Tunes, I have, get, the, message:, the folder, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get over the past, this??

  How about you post that again without commas and maybe then I'll read it?

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• I downloaded the latest version 3 times and I still get a message saying that I don't have the version lasted. I can not open Pandora because of this. What Miss me?

  I downloaded the latest version of firefox 3 times and always get the message that I don't have the current version. I'm not able to open Pandora.com because of this. What Miss me?

  Hi cheryl28,

  It seems that the details of your system, would you say that you are still on version 3. How have you tried to update Firefox? There were errors during the update? You should look at Firefox updated to the latest version for more details.

  You can also try to go to http://www.mozilla.org/en-US/firefox/new/

  1. Download the full installer for 8.0.1 to your desktop.
  2. Closing Firefox. Remember that she is still ongoing in the background.
  3. Run the Setup program and re-open Firefox.

  Hope this helps!

• OSX EL CAPITAN UPDATE CANNOT BE INSTALLED TO THIS DISK. THIS VOLUME DOES NOT MEET THE CONDITIONS FOR THIS UPDATE

  Hi all

  My iMac features are:

  • 27-inch, late 2013
  • 3.2 GHz Intel Core i5 processor
  • 8 GB 1600 MHz DDR3 memory
  • Start drive Macintosh HD
  • NVIDIA GeForce GT 1024Mo of 755M graphics
  • Storage: 301,35 free GB of 999,35 GB

  Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016

  Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office.  During installation, the following error message appears:

  "OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".

  I would be very happy if someone can help me in installing this update.

  Thank you.

  Slpm6

  I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.

  You are using a newer version of El Capitan that the updater contains and so cannot install it.

  (139598)

• Where can I download this Volume display?

  I use a dv4i-2100 but my display of the volume does not work! How can I have this Volume display?

  Hello

  The volume OSD in your photo is installed with HP MediaSmart SmartMenu - you must have at least another MediaSmart application installed before installing SmartMenu.

  Kind regards

  DP - K

• Error E0BB0147: the "Volume Snap" operation is not currently enabled for this Volume

  Hello!

  Since an update of my Windows XP at the end of 2011, I have problems on my HD using Ghost 14.0 backup. I get the following error message:

  -Impossible to create an image of the selected disk virtual volume.

  -E0BB0147 error: "Volume Snap" operation is not currently enabled for this Volume.

  What should I do to fix this?

  Thanking in advance for your help,.

  tico776

  Hello

  I suggest you to see link and check if it helps:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

   

  Error: "error E0BB0147: the 'Snap Volume' operation is not currently enabled for this Volume" when creating a backup using Norton Ghost 14.0

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080929121249EN&product=home&version=1&PVID=f-home

• I click analyize it is said you should defragment this volume then I run imediatlly once again and he said that I should defragment. Once again

  Original title: Disk Defragmenter

  I click analyize it is said you should defragment this volume then I run imediatlly once again and he said that I should defragment. again, I have windows Xp IE8 and Ms s essentials do it please answer very clear, I'm not very good with computers, I'm an old guy, thank you.

  Hi RichSQL,

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Relocation of defragmentation

  (a) in the disk, find the directory c:\Windows\Inf. If the system directory is not on the c: drive or not named Windows, find by clicking on "Start", then "run" and type %Windir%\Inf in the area.

  (b) find the file called dfrg.inf.

  (c) right click on the file and select "install".

  Step 2: Repair defrag

  un) Click on "Start", then "run", run this command: regsvr32 dfrgsnap.dll.

  (b) click "Start", then "run" and execute this command: regsvr32 dfrgui.dll.

  (c) run Defrag.

  Method 2: Follow the steps in the article.

  Disk Defragmenter does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/922379

• Problems of Defrag - defragment suddenly stops indicating that some files on this volume cannot be defragmented

  When I try to defragment my computer, it suddenly stops indicating that some files on this volume cannot be defragmented. A way to solve this problem? I made the center of Fix-It without solving the problem. Anyone with a fix?

  Before defragmentation utility to run Disk Cleanup. Some files cannot be defragmented, because they

  are in use... To solve the problem, open the file system, advanced, performance,

  swap file, click on the button 'Edit' L.click on the C: drive, the value "no page file" click on set 2 X,

  close, restart the pc... Go back to xp, in run, type: cmd cmd type: Defrag C:

  Once her thru, type: EXIT reopen system, set C: "let the system manage", click on set 2 X,.

  close, commit to rewrite a new file, restart the pc.

  It works best if you have a 2nd HD installed with a pagefile on this too, in the form of windows

  requires a file permanently...

• error defragmenting the Disk Defragmenter has detected Chkdsk/f. is supposed to run on this volume, please run chkdsk

  I'm trying to defrag and I get a message saying ' Disk Defragmenter has detected /f. Chkdsk is supposed to run on this volume, please run Chkdsk.»  How am I suppose to do?

  Use my computer to access the list of HDs. right mouse click on the drive in the list. Choose Properties error checking check now.

  Run the check.

  If the drive that contains Windows, the system will restart and check the disc. After rebooting the system, you can run the Defragmenter.

  Tom Ferguson

• How to defragment the drive d error: some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.

  Original title: how to defragment the d drive

  Defragmentation is complete for: (c :)) some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.   I solve this problem with pagedefrag but same problem with the D: drive. What can I do? is a D: disk defragmentation program at system startup? Please help me :(

  Its a simple but problem ongoing with the pagefile... The hd is in use & cannot defragment parts of it

  because of this, use to defrag times. To fix the files fragmented on any hard drive, open the system

  Properties, performance, advance, the page file, change the button, select the hd, press "no paging file" value

  Enter 2 X, close, restart the pc. Once in xp, open cmd, type: CLEANMGR then select the hd,

  type: Defrag D: D: being fragmented, once through, hd output cmd, return to system properties, set

  the swap file for hd to "let the system manage", click 2 x game, close, you get a couple of windows

  saying: 'replace the file' say Yes close... Sometimes you have to try several, but you will succeed...

• When you run defrag, get the message "You have no need to defragment this volume", it still should be done?

  Each week, I run chkdsk, disk cleanup and defrag but ' end defrag I was wondering should I defragment it even though it says "You don't need to defragment this volume" I remember that someone said to defragment your volume once a week or once a month. I'm so confused: / what should be my routine? defrag every week or once a month? Help please ~

  Contrary to what said Divya R I would run a week Disk Defragmenter although you see "you don't need to defragment this volume." The report is based on a statistical analysis and figures produced in this way on a global scale can often be misleading. You can manipulate the numbers to present the result you want to see.

  An obvious defect, is that the analysis is almost certainly done on all files. However, the files that you always have access to are only a small proportion of the whole. You want to be able to access the files that you are using the large archive of that rarely used files.

  Supplied with Windows XP Disk Defragmenter is a utility written more than 10 years that you might want to try Defraggler which is freeware and a more flexible tool. I used it successfully for 2/3 years before I migrated from Windows XP to Windows 7.
  http://www.Piriform.com/Defraggler/download

  Click Download from Piriform. com after the version to get the freeware version.

  http://www.Piriform.com/Defraggler/features

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/