Missing DVD CDrom drive

Similar Questions

• Impossible to re - install Windows 7, dvd/cdrom drive is missing.

  Original title: ireinstalling windows 7

  I reinstalled windows 7 and it says dvd/cdrom drive is missing.  and so the download stops. I can't access what any previous OS... it's the password on the screen of the owner and I do not know the password... I've been playing with it for a week now and I am at witts end.

  Hi David,

  I suggest you to create a bootable USB and re - install Windows 7 from that.

  Download Windows 7 USB/DVD tool
  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  See the article for more information.

  "A required CD/DVD drive device driver is missing" or "needs a driver your computer media is missing" is displayed when you install Windows
  http://support.Microsoft.com/kb/2755139

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• pilot missing dvd/CD; drive even not recognized by the computer

  somehow, when I tried to burn a dvd, (windows DVD Creator) the computer seems to have removed its own driver for the dvd drive (I put the disc in, it recognized that it was not a disk supported, put a new one in the drive, and create dvd windows then told me that I need to install a dvd/cd writer to complete my project). the relase button disk would not work after turning in the second disc and always used to work even after that. If I use a pin code manually to open and put a disk in the light lights up recocnizing there is something in there, but that nothing, not even spin the disc. No cd, dvd or all other discs work. Ive tried a few different driver Fixer programs, even those you pay (mender driver, driver detective - no even to recognize the missing driver) and can't seem to find a solution. cd/DVD device does not even appear in "device system' list or lists of material which must show all devices, programs or drivers... also do not show my E: / in my computer, what would be my dvd/cd drive." I tried the "regedit" and could not find the 'filter filter up/down' you are supposed to remove to fix. " filter of upper/lower case is not listed in the options.

  I'm on a hp Pavilion dv6000 and ive tried searching on the site Web of hp and help all forums, with no solution until now...

  Hello

  For the CD/DVD problem start up that convenience store and work down to jump
  nothing. He is even said to continue if the CD/DVD drive is not displayed in Device Manager.
  You are much less likely to solve the problem by a hit or miss approach to try this
  or such. And of course, there may be a material cause.

  The HP forums, ask questions and I hope that those who have had
  the same issues on similar equipment that have solved the issue respond. Only way
  to succeed is to give your best effort.

  HP does not have a lot of online documentation and help diagnostics on their site and those
  could help to resolve some of the questions withour paying for support.

  Back up your data on the device and it goes back out of the box state
  can be one of the best moves to solve the present problems.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HD DVD - ROM driver is missing or corrupt on Satellite A200-s 23

  Hi, recently I bought my Toshiba Satellite A200-23 s and now it says that the HD DVD-ROM driver is missing or currupted. The system can not see DVD - ROM. My laptop is still under warranty, but perhaps I can fix it somehow? I found the list of drivers on this site but you've not seen DVD - ROM drivers.
  Thank you

  Don t think that it s a hardware problem.
  I think that it s a registry problem.

  Access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop.

• My CD/DVD Rom drives read do not. Windows cannot load the driver for this hardware. The driver can be correpted or missing (code 39)

  How can I reinstall a driver of dvd/cd rom?

  Hi mourad,.

  1. have you been able to use the CD/DVD-Rom drive before with no problems?

  2. did you of recent changes on the system?

  This error occurs if the driver is corrupted or missing.

  You can read the following article and try the steps to solve the problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• DVD ROM drive missing from the Explorer

  I installed nero burning rom on vista and then the dvd rom drive disappeared from the Explorer.  When I went into the Device Manager and checked my dvd rom for the solution properties, it says that the driver could not load and that Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). How can I recover from this issue now? I don't want to reinstall vista or uninstall nero. But I want that this CD-ROM drive back in the Solution Explorer. What can I do or how I should do? I need a step by step procedure that can solve this problem.

  Try running the Fixit:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  You can also follow the instructions under "fix it myself", Windows 7 from Windows Vista.

  Important: The instructions, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

• Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

  OriginalTitle:lack drivers

  I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

  Hello

  Are you able to boot to the Windows Vista operating system?

  Read the following article and see if that helps:

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

  http://support.Microsoft.com/kb/952951

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Impossible to re - install Windows Vista. "A required CD/DVD device driver is missing." appears

  I have the same problem as a previous applicant.  My hard drive went down and I had to replace it with a new one.  Windows Vista is the operating system installed on my HP Pavilion and I try to use reinstall drive.

  The message says "A required CD/DVD device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  I don't have a floppy drive on this machine, so I'll have to do the installation from a USB key.

  I tried so that it points to the Installation DVD, but it was still impossible to find the required driver.

  Thank you

  Sean

  Hey Thornwill

  HP machines have some problems with the replacement of their equipment with new hard disks not hp etc. and reinstall vista

  My advice to you would be that you contact hp

  Walter, the time zone traveller

• Missing DVD/CD ROM (drive E).

  I had trouble burning a CD when I realized that my CD-ROM/DVD-ROM has been totally absent. I think I need to install new drivers, but don't know where to find them. I have Windows 7. Help, please!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Zbook Studio G3: error cd/dvd device driver missing

  Hello guys,.

  When I try to install windows 7 Enterprise 64-bit on Zbook Studio G3, I get the lack cd/dvd device driver. I tried all the possible drivers, but no luck

  Any help would be appreciated

  Thank you

  concerning

  Generally, it is an indication that the you use the Windows 7 installation media that is inserted in a USB3.0 port. Windows 7 is not supported with native support for USB3.0 and requires the installed USB 2.0 port or a USB3.0 port emulation USB 2.0. In addition, there may be issues when you try to install Windows 7 on an Intel SkyLake chipset.

  The first step would be to go through the BIOS and see if there is an option for the compatible mode or emulation for USB ports.

  Alternatively, you can contact HP to see if they have material recovery/restore for Windows 7 to your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• my dvd/cd drive is missing... help!

  I have a hp Pavilion 6500 laptop w / a cd/dvd lightscribe drive. The problem is that the computer no longer recognizes. I tried every patch and driver, download softerware I can think and nothing works. He always ends the same, "no disk drive not detected. Can someone please help me and let me know what to do?

  Check in the Device Manager, marks of yellow warning?

  Regarding each patch and driver, drivers for your laptop are taken from HP site and nowhere else. Cd drivers are part of the chipset drivers

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• Windows 7 does not suddenly recognize DVGW & CDROM drives...

  I have been using Windows 7 for a few months now, and no problems with my dvd writer Windows 7 / CDrom drive.  Both works fine up until yesterday.  When I check the drivers supplied by Device Manager they both now an exclaimation mark yellow as if Windows 7 does not recognize these devices.  I have a Samsung TSST corp CD/DVGW-SH-S182D, which is on the list of compatibility for Win7.  I have tried to download the driver from the manufactor, but still does not solve my problem.

  I wonder if everyone suddenly ran into this problem and you may have a fix.  I know that the pilots, both work with Windows 7 and I know the DVD burner because I used it before that Windows suddenly stopped to recognize the camera... Please help works, thx.

  Hello

  Have you tried restoring the system to a point before that happened?

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ==================================================

  If the above didn't help (or if the problem comes back).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.