Ignore this thread wasn't a bug after all
I just noticed that if you use
High switching of
Edit: uh, silly me. It's This announcement, so I can accept is as a solution, because it does not appear that the first message in the thread can be accepted. Tags: BlackBerry Developers ignore this thread - USER_TAB_COLUMNS shows tables more than USER_TABLES Hello His car user_tables shows the list of all the tables owned by the particular user. So the 3rd table could be seen in your case. Concerning CAMERA BUGS AND ISSUES - please report them in this thread. REPORTS ONLY PLEASE. If you have had an accident unexplained camera or a bug please report it here in this one single thread. By reporting any camera hangs in one place and not in separate threads, as well as information on the configuration of the camera and aboved we hopefull can achieve several things: 1: know just how big or small the problems really are. These incidents isolated or is there a bigger problem. There are thousands of F5 Networks and F55 in operation day after day. It is not surprising to find the weird device with a previously unknown hardware or a software problem, but if there are several examples of the same show, then this may indicate a problem of firmware. By collationg, all unexplained of bug reports in one place that we can find areas of interest. 2: by including a detailed report of what is past and what accessories were attached to the time where we can look for common factors that can cause problems. 3: Sony only needs to check a thread to see what is happening, they do not need to browse through pages and pages of stuff. ONLY after a bug/crash report. NO feature requests or ' I wish that... ". "Lets keep the clutter of wire free to make it easier to see any real operational concerns. I suggest a single page that can be updated with workarounds or know bugs that users should be aware of. Please do not discuss your problems or other problems on this thread. That's just pointing that out. If you want to discuss a topic report it here first, and then open a new thread on this specific issue. WHAT TO INCLUDE IN A BUG REPORT: Please provide the following information: Version type and the firmware of the camera. Version of the firmware so attached R5. Attached Aboved, include R5, adapters battery or power supply, viewfinders, monitors connected directly to the camera. Type of battery and the brand, the battery charge State if know. The type of SxS card, preferably the part number on the back of the card for example 'SBP - 64. The record format and pace. All special modes such as slow shutter or S & Q. If you use a scene or non-standard file defining let us know. What you were doing when the bug appeared and what has happened as well. Everything you think might have contributed to the bug or what you're doing to get around. Moderators: I think it must be done in a sticky? As reported in another thread: If you upgrade the firmware and then load a FILE ALL created when the appliance has been set at 25 p/50 p, then the camera crashes while recording. For now, I would recommend creating a FILE all charges or the SCENE FILE for each version of firmware. As I close outlook wxpress yesterday, I got the prompt for compaction. It's been awhile, so I let it start and stop later the computer without checking anything. Today, when I went to check my messages, everthting from 2012 until yesterday was gone. I went in the trash and saw that he was responsible. I have selected to restore a prompt came and I hit restore all. I return wwent into my Inbox and found nothing changed. I searched the web and found this thread and read something about 'with OE not open' and stuff on .bak and .dbx, and fear that I might have screwed up. Where can I find these messages? How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast. How to work with this pinhole? Usually a paperclip or toothpick or ball pen. Stick it in the hole and reset for about 10 seconds until the front led flashes quickly. How to reset AirPort Extreme 10.11.6 OS? The software method... Unlike the above material method... is to open airport utility and select restore default settings. Both methods take you to the same place. You can also read the manual... Any Web site, that is, it started yesterday, I will click on a link or something in that sense. For example, Google. I go to google.comand start typing, rather than appear in the search bar, it appears in the URL bar. He also does this on any website that I sign, another example being the site of my college, in which I am really hoping that this is not a security bug because it would mean very bad news! It seems that the resettlement of firefox was the key to fix. But I had to lose all my favorites in the process. =( Almost all sites Web generates a message "this connection is not approved. After choosing "I understand the risks", "Add exception" and "Confirm Security Exception", it takes me to a lighter version of the site that looks nothing like the real site. Also, I get this message on the sites of Mozilla trying to solve the problem. Under the technical details, it reads, "the certificate is not reliable because no sender string has been provided. (Error code: sec_error_unknown_issuer) "the articles I've read on this subject do not seem to help. This happened after I restored it firefox to default settings. I have a copy of my personnel file on my desktop. I tried to put it back in, but nothing changes. I've deleted and reinstalled firefox a few times. Any idea would be appreciated. Thank you for your community! Unfortunately, certificates of do_not_trust could be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you. afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner. Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message? Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac. The latest support for your operating system version is 3.6.26 , you are fully updated. For more information, see: Firefox 3.6 system requirements Firefox 10 system requirements [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8] http://www.floodgap.com/software/tenfourfox/ http://tenfourfox.blogspot.com/ https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported Thank you Please check 'Resolved' the answer really solve the problem, to help others with a similar problem. N/a: Moderator, please delete this thread Moderator, please delete this thread. All the most manufactured OEM cases have hard plywood of e/s, but you can carefully cut the case to fit the new i/o Panel, I did it years ago. Some OEM cases have no standard orientation of ATX motherboard, do your homework, sorry I can't be more specific for this particular model. Put a hand on her dismount, remove the mobo and compare to the one you want to install. Hi, at this link: http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/5468b6de-46BF-496F-b9e3-dc8a1bf36345 The post at the 3rd position starting with Dear Kevin merged by microsoft personnel, but the post has nothing to do with the other post in this thread, or any other question I posted. Can we please split it out for me. The title should read Attn: Kevin Hau - about your post on 25 August, microsoft updates. Thank you very much Hi Michelle, Welcome to the Microsoft Answers site! I've divided your son and responded to them respectively. You can find both threads in the below given links. Attn: Kevin Hau - about your post on 25 August, Microsoft updates Windows update does not update windows defender and so tried to update via windows defender that shows also no update http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/5468b6de-46BF-496F-b9e3-dc8a1bf36345 Hope this information is useful. Amrita M Microsoft Answers Support Engineer Original title: error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module could not be found I'm cluelss and generally ignore this message. Should I try hard or leave? Thank you This link may be a little more useful: http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/ "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder? Hi Jack, This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find. André Hi guys, I need to create inlays video similar to this video and I wonder if After Effects is what I need to do this. Here is the link to the video https://Vimeo.com/148280092 Anyone has any idea if After Effects is what I need for this? It depends on the amount of work you're talking about. Many works were by writing the scenario, shooting footage of quality, choose a good music track, the track of the music editing, edit the images of music, etc. before she even had the hands of the AE artist. If you speak only the work of EI, I suppose it would be less than a week, but more than a day. It depends on how much of the look has already been set. Someone has to take this yellow circle with lines through it as their reason for basic design at some point. If they gave me the finished edit and the base brand eye/guidelines, I expect to take two or three days to do depending on how picky, I was in nailing the details. The problem is that if someone else has the change, they could have caught the bad shots and I might have to do some rotoscoping and then he could easily balloon in a few weeks! I guess that the one who does the work has had enough time to work on it. Because if they had more than a few hours, they would have removed the clichés of the CRAFT of 0:48 0:52. Heck, if you have Pro mocha with the deletion module, which wouldn't even take an hour to remove. help with this thread using oracle 7.3 Dear expert; On this thread, I am using but I'll need help more with additional information in this regard. see examples of data below Hello experts. I use oracle 7.3. Therefore, I have the sample data below create the table table_one ( req_week varchar (1000). Username varchar (1000). sale number (30), place varchar (1000). break_sales number (30) ); insert into table_one values ("week 1", 'John', 100, "NY", 2 "). insert into table_one values (' week 1', 'Chris', 20, "TX", 3 ') insert into table_one values ("week 1", "Melissa", 80, 'GOES', 4 ') insert into table_one values (' week 2', 'Katy', 40 'SC', 1 ") insert into table_one values (' week 2', 'Angle', 10, 'NC', 2 ') insert into table_one values (' week 2', "Vick", 30, 'CA', 3 ') insert into table_one values (' week 3', 'Zack', 60 'CA', 1 ") insert into table_one values (' week 3', 'Deb', 60 'NM', 2 ') insert into table_one values (' week 3', 'Antoine,"60,"TX", 3 ') necessary results I need the top 2 sales in a place a week expected results req_week username place sales Week1 John 100 NY Week1 Melissa 80'S Semaine2 Katy 40 SC Semaine2 Vick 30 CA Semaine3 Zack 60 TX Semaine3 Deb 60 NM Note, in this particular case, if there is equality in sales, then use the break_sales column as a case. The break_sales was never a tie... it is so far the query and it does not work as expected Any help is appreciated. Thank you Hello It seems that your existing query is very good, he's going; Just add the conditions for breaking in the WHERE clause: SELECT d.req_week d.username d.sales d.place FROM table_one d table_one o
WHERE d.req_week = o.req_week AND (d.sales< > > OR (d.sales = o.sales AND d.break_sales > = o.break_sales ) ) GROUP BY d.req_week d.username d.sales d.place HAVING COUNT (*)<=>=> ORDER BY d.req_week COUNT (*) ; Thanks for posting the CREATE TABLE and INSERT statements; that really helps. When I went to open CC after all this I get redownloading is a totally blank white screen. I have the complete package of the student and he just renewed for another year. When I went to open after all this I get redownloading is a totally blank white screen. I have redownloaded then it again, same thing. Closed all Adobe programs through the Task Manager and restrated my computer, always a totally white screen of white. How can I fix it? Please respond to the: Creative cloud is empty window why? Creative cloud Packager white screen after the Adobe ID Login Re: Empty opening creative cloud app Blank white screen. Sign in | Creative cloud Packer Concerning Stéphane How can I change default Firexox printer to my system default printer? When the print dialog... back to Firefox, it shows that it will print to PaperPort. My default system printer is a Lexmark network printer. I checked my computer devices and printers, and the Lexmark is checked by default. Firefox is the only applica Satellite C660 - need drivers Windows XP Home edition Anyone know if all the drivers are available so that I can go back to XP? Currently I use W7 but can't find honestly no reason to give up XP and I also prefer the XP functionality. Based on my experience of W7 I'm dumping my Microsoft stock. Computer IPhone isn't FaceTime. my iphone from UNITED Arab Emirates BT need drivers for my Toshiba laptop not Where can I find the latest drivers for a Toshiba RFCOMM bluetooth device built into my Toshiba laptop no?I get an error message "bluetooth has not begun." I have a HP Pavilion 15 laptop. After I my windows 8.1 upgarded to win 10 and decided to update my graphics driver amd, after the installation of update to the course to restart commissioning hangs at the hp logo (sometimes to start startup repair, tSimilar Questions
It's been posted a few minutes ago.
(I didn't know that this forum was so active the my question would disappear as soon as the first page in a few minutes.) Sorry).
Probably a matter of newby, but how could this be possible? This is what I see in my system. Why the second query does not return table 3?
SELECT TABLE_NAME, COLUMN_NAME
OF USER_TAB_COLUMNS
Table 1, column 1
Table 1, column 2
Table 2, column 1
column 2 of table 2
column 1 of table 3
Table 3, column 2
SELECT TABLE_NAME
FROM USER_TABLES
Table 1
Table 2
Edited by: mgro November 23, 2009 03:45
And user_tab_columns displays the list of all tables and views (columns) belonged to the particular user.
Anurag
Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compact
In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
Note: If you have new messages in the folder you are go restore, move them to a folder first created user, or they will be lost. They can be moved once the old posts have been restored.
Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
DBXpress run in extract disc Mode is the best chance to recover messages:
http://www.oehelp.com/DBXpress/default.aspx
A general warning to help avoid this in the future:
Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently.
http://www.oehelp.com/OETips.aspx#3
Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145
If I need to can replace it where I get an older version?
Thank you
:)
Visit our Microsoft answers feedback Forum and let us know what you think.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
SELECT d.req_week, d.username, d.sales, d.place
FROM nikeus_report.dbo.table_one d
, nikeus_report.dbo.table_one o
WHERE d.req_week = o.req_week
AND d.sales <= o.sales
GROUP BY d.req_week, d.username, d.sales, d.place
HAVING COUNT (*) <= 2
;
Maybe you are looking for