Similar Questions

• How can I make the popup with empty fields and create new record?

  I would use a popup create new record.
  I created an af:popup drag and drop a data control VO in jsff. Then, I created a button and place an af:showPopupBehavior. I was able to pop-up window by clicking on the button.
  However, the window filled with information from the record 1. and when I select a record in the table and click on the popup, the popup is filled with this record.
  How can I make the popup with empty fields and create a new record by recording the popup?
  Thank you

  Hello

  You must call the CreateInsert for the underlying ViewObject operation when opening the popup because it does not allow to clear the input field, you must have a new record created

  Frank

• Mail using smtp will with empty field

  Hello
  
  I send a mail using utl_smtp .receipient becomes the mail.but problem is that it is it with white 'in the field '.
  Here is the code I wrote.
  
  CREATE OR REPLACE PROCEDURE mis_test_send_mail AS
  pFrom VARCHAR2 (100): = "[email protected]";
  CRLF VARCHAR2 (100) CONSTANT: = Chr (13) | CHR (10);
  message VARCHAR2 (1000);
  preceiver VARCHAR2 (100): = "[email protected]";
  psubject VARCHAR2 (100): = "Test Mail";
  mail_conn Utl_Smtp.connection;
  mailhost CONSTANT VARCHAR2 (50): = "mailrelay.organization.com";
  
  BEGIN
  message: 'How Are You ' = | CRLF;
  mail_conn: = Utl_Smtp.open_connection (mailhost);
  UTL_SMTP. HELO (mail_conn, mailhost);
  UTL_SMTP.mail (mail_conn, pfrom);
  UTL_SMTP. RCPT (mail_conn, preceiver);
  UTL_SMTP. Data (mail_conn, message);
  UTL_SMTP. Quit (mail_conn);
  EXCEPTION WHEN OTHERS THEN
  dbms_output.put_line('error:'||) SQLERRM | "| SQLCODE);
  END mis_test_send_mail;
  
  
  
  
  Any help on this is much appreciated.
  
  Kind regards
  Clain

  You must include all headers that must appear in the mail in the message data. The section headers of data must be separated from the body section by at least one blank line.

  message:= 'From: "sender name" ' || crlf;
  message:= message || 'To: "recipient" ' || crlf;
  message:= message || 'Subject: this is only a test' ||crlf;
  message:= message || crlf;
  message:= message || 'How Are You' ||crlf;
  

  The utl_smtp.mail and utl_smtp.rcpt procedures simply to tell the receiving SMTP server that sends this and deliver that to him, but what the recipient sees is in the header of the payload section utl_smtp.data.

  You can take advantage of what you can include multiple calls to utl_smtp.rcpt, but not to include them in the header section of the payload. This is exactly what happens when you use your mail client to send blind carbon copies of an email.

• Number of rows in a field of type text with Javascript

  Hello

  I have a form where I dynamically retrieve the number of rows in a text field.

  When I use getField(), I returned an object of type field. I see these rect properties, but nothing about the number of lines of text in the field.

  Any idea (except to get the height of the field and that dividing the height of a row)?

  Kind regards
  Karl.

  The number of lines is not a property that is exposed to a field (I've never seen this application before). Do you speak to find the number of rows in an empty field or has data in it (for example, I need to know how much data the user entered)?

  Maybe if you describe your use case we can come up with innovative ideas to solve.

  Paul

• How to display the "Add a contact" dialog box with the non-empty fields?

  On the BlackBerry, I want to display a dialog box 'Add a contact' with some fields filled.

  I assumed would work the following code:

  Contact BlackBerryContact = mContactList.createContact ((BlackBerryContact));

  populateSomeFields (contact);

  AddressBookArguments args = new AddressBookArguments (AddressBookArguments.ARG_NEW, contact);

  Invoke.invokeApplication (Invoke.APP_TYPE_ADDRESSBOOK, args);

  but no way. If I invoke with ARG_NEW a completely EMPTY fields are displayed.

  If I invoke with ARG_COMPOSE an IllegalArgumentException is thrown. Is it possible that I can show 'Add a contact' with some informed fields?

  just as an idea: maybe you have to make contact before the opening of the new message notice?
  otherwise it is not possible, you will need to write your own GUI to change the fields in contacts.

• How to keep the form fields empty with calculated fields

  I am to convert Excel files to Adobe forms with calculated fields.  I use the following if statement to keep the empty fields until the entry is made.

  var v1 = + getField("LengthRisersToday.1").value;

  var v2 = + getField("LengthRisersToDate.0").value;

  If (v1! == 0) {}

  var sum = v1 + v2;

  Event.Value = sum;

  } else {event.value = ";}}

  This does not work if someone from 0 in the field "today."  This is sometimes necessary in this form, as the other fields must be filled and a riser is not always added.

  This form consists of several lines and inscriptions are made there is a running total in column "on this day".

  
  

  
  

  So you say that a result no one is valid and that you want to delete a result of zero only if the LengthRisersToday field is empty? If so, the script can be replaced by:

  var s1 = getField("LengthRisersToday.1").valueAsString;

  var v2 = + getField("LengthRisersToDate.0").value;

  If {(s1)

  var sum = s1 + v2;

  Event.Value = sum;

  } else {}

  Event.Value = "";

  }

• Sort Table data with text fields (form)

  I googled and searched forms of days for a response, but were unsuccessful.

  The only wire that I found being a year old, I wanted to start a new instead of bumping an old

  Ref: http://forums.adobe.com/message/3000436

  I'm looking for a script to sort the data in a form that is based on user input.

  The shape is just a table with multiple rows and columns of 3-5 (according to the dept) it's used)

  Using the thread referenced above, I was able to get a static table to sort, but I need to have all the fields to be text fields and the users enters the data.

  The example of the other thread static:

  

  I'll use the same layout, just need to be a shape rather than static.

  If anyone can help or point me in the right direction, it would be great.

  Update #1:

  I find this page:http://cookbooks.adobe.com/post_Sorting_tables_in_dynamic_PDF-18993.html

  I'm the kind of work and it seems to be mostly what I look for, but how to deal with field empty?

  For example, the last three lines are empty (no data) the genre fails.

  Here is the code of the page, how can I change to fix the empty fields?

  ------------------------------------------------

  pass var = 0; column index

  var num = false; Is the numeric column

  var OrderAsc = true; Sort order

  function SortTable (tableRef, colIndex, isNumeric, CSA)

  {

  Try

  {

  Col = colIndex;

  NUM = isNumeric;

  OrderAsc = Asc;

  String variable that contains the data of the form as the XML string

  data var = tableRef.saveXML ('pretty');

  A XML variable contains the deserialized XML data

  xmlData var = xfa.datasets.createNode ("dataGroup", tableRef.name);

  xmlData.loadXML (data);

  Number of rows in the table

  var rowsCount = xmlData.nodes.length;

  Number of columns in the table

  passes of the var = xmlData.nodes.item (1).nodes.length;

  Two dimension table contains data of the complete table

  Master of var = new Array();

  Fill in the chart with XML data

  for (var i = 1; i < rowsCount; i ++)

  {

  Master [i-1] = new Array();

  for (var j = 0; j < passes; j ++)

  {

  Master [i-1] [j] = xmlData.nodes.item (i).nodes.item (j) .value;

  }

  }

  Sort the table 2D

  Master.sort (sortFunc);

  Re-fill the XML variable with data in table

  for (var i = 0; i < master.length; i ++)

  {

  for (var j = 0; j < master [i] .length; j ++)

  {

  xmlData.nodes.item(i+1).nodes.item (j) .value = master [i] [j];

  }

  }

  Change the data in the table and the back of the form

  var result = xmlData.saveXML ('pretty');

  tableRef.loadXML (result, 1, 1);

  XFA. Form.remerge ();

  } catch (e)

  {

  App.Alert (e)

  }

  }

  Customize the sort function to manage the 2D array and numeric columns

  function sortFunc (a, b)

  {

  var x = a [col];

  var y = b [col];

  Try

  {

  If (num)

  {

  x = parseInt (a [col]);

  y = parseInt (b [col]);

  }

  } catch (e) {}

  If (OrderAsc)

  {

  return x == y? 0: (x < y?-1: 1)

  }

  on the other

  {

  return x == y? 0: (x < y?-1: 1)

  }

  }

  Solution found!

• don't type in the empty fields as search engines or login information

  Hello
  I installed firefox for android, but the problem is that noting happens when I try to type anything in the empty fields.
  for example, in google.com when I tap on edit search to write s.th. to perform a search, the QWERTY keyboard appears, but no letter is threre when I type!
  It also happens when in a forum, I want to enter my login details; new keyboard is displayed but no letter does when I type.
  but in the address bar, I can write without any problem.
  my camera is galaxy notes with android 4.0.4
  Thank you.

  Try turning off "Don't keep the activities" of the Android settings.

  • Press the home button
  • Press the menu key
  • Select settings
  • Scroll down to developer
  • Scroll down to 'Don't keep activities' and uncheck the box

• Another user changed the row with a primary key oracle.jbo.Key]

  I see many discussions about this error, but still cannot understand the difficulty that I need in my scenario.

  I am an Oracle Developer and completely new to ADF, please bear with me.

  I use JDeveloper 11.1.1.9.0

  My scenario:

  Creates an object editable view (UVO) with sub selects in the query, which is from several db tables.

  Creating a table using the UVO

  When I try to update a field in the table, and then click the validate, I get the error message:

  Another user changed the row with a primary key oracle.jbo.Key]

  Can someone explain in what scenarios I see this error and how do I solve this problem?
  

  Try the viewObject execution after validation and reQueryOnCommit set to true

  For details see - binary: a reason more for "Houston-25014: another user has modified the line containing oracle.jbo.Key primary key '

  Ashish

• External table with the field tab delimiter

  With the help of Oracle 11 g Release 2

  Here is my table create statement external:

  CREATE TABLE global.ext_a_attrib_cmt
  (   tag      VARCHAR2(255)
    , from$    VARCHAR2(255)
    , to$      VARCHAR2(255)
  )
     ORGANIZATION EXTERNAL
  (  TYPE ORACLE_LOADER
     DEFAULT DIRECTORY EXT_DATA_DIR
        ACCESS PARAMETERS
          (  RECORDS DELIMITED BY NEWLINE 
             SKIP 1
             BADFILE EXT_BAD_DIR:'a_attrib_cmt.bad'
             LOGFILE EXT_LOG_DIR:'a_attrib_cmt.log'
         --    FIELDS TERMINATED BY 0X'09' -- TAB delimited  
             FIELDS TERMINATED BY '\t'
             OPTIONALLY ENCLOSED BY "'"
             MISSING FIELD VALUES ARE NULL
             REJECT ROWS WITH ALL NULL FIELDS
          )
        LOCATION ('a_attrib_cmt.txt')
  )
     REJECT LIMIT UNLIMITED
     NOMONITORING
  /
  

  Here is the text file, a_attrib_cmt.txt:

  tag	Of	TO
  FrontSpringType_id	Coil	w/FRONT COIL SPRINGS
  FrontSpringType_id	Sheet	the FRONT/w suspension SPRINGS
  Aspiration_id	Naturally aspirated	w/o TURBO
  Aspiration_id	Turbocharged	w/TURBO
  Aspiration_id	Supercharged	w/COMPRESSOR
  SteeringType_id	Grid	w/RACK and PINION STEERING
  SteeringType_id	Gear	w/GEAR STEERING
  FuelDeliveryType_id	CARB	w/o FUEL INJ
  FuelDeliveryType_id	FI	w/FUEL INJ
  BedLength_id		?" BED
  BodyNumDoors_id		? DR
  BrakeSystem_id		w / ? BRAKES
  FrontBrakeType_id		w/FRONT? BRAKES

  PUBLIC has privileges to write to the directory EXT_DATA_DIR.

  Here is the error I get:

  Globall@ORA1 > select count (*) in the ext_a_attrib_cmt;

  Select count (*) in ext_a_attrib_cmt

  *

  ERROR on line 1:

  ORA-29913: error in executing ODCIEXTTABLEOPEN legend

  ORA-29400: data cartridge error

  KUP-00554: error occurred when parsing the access settings

  KUP-01005: syntax error: found 'minussign': expected an a: "badfile, bigEndian, characterset, column, data, delimited, discardfile,

  disable_directory_link_check, fields, fixed, charge, logfile, language, nodiscardfile, nobadfile, nologfile, date_cache, preprocessor, TailleLue, String, jump,

  territory, variable.

  KUP-01007: line 5, column 8

  Just get rid of the comment line. You cannot cave comments to create external table statement. SY.

• Idea about the creation of the registration with blank fields

  Hi friends,
  I am trying to build a small application where the first page of the application will be the home page. On the homepage, I have register, Login and home buttons. By clicking on the registration link, I want to go to the page where the page with blank fields. How can I view the fields blank when the page is displayed for the first time. I've linked the data control on the page. But when the page appears, it seems, with the data. Also I want to have a cancel button pressed to invalidate or to write off the new record created. How can we achieve this? Any idea.

  Thank you

  User, please tell us your Jdev version!

  A form with fields related to the vo for example shows the data out of the current line. Top get an empty fields, you must create a new line before you navigate to the page to display the form. Your use case can be applied if you call creatInsert inn the vo holding you back data, then go to the screen, allow the user to fill in the data. If the user cancels the cancellation of appeal form to remove the new line, if the user has saved the form validation data in the db.

  Timo

• How to hide all the empty fields on a page?

  Hello

  I want to hide all the empty fields but to exclude tables as it messes up the table. He hides this empty cell with borders and the table does not look right.

  My script below works currently it hides all the empty fields on this page.

  Is it possible to exclude on the tables?

  Thanks to all in advance.

  function hideFields (myParentObject) { }

  var allChildElements;

  var intNumElements;

  var currentElement;

  var j;

  var temp;

  //Get the parent all child element nodes

  allChildElements = myParentObject.nodes;

  //Total number of items in the object

  intNumElements = allChildElements.length;

  //Loop through all child elements

  for(j=0; j< intNumElements; j++){

  currentElement = allChildElements.item (j);

  //If the element is another subform which we will call the new function recusively

  If(allChildElements.item (j) .className = "subform") { }

  //if (currentElement.layout = "table") {}

  //else{

  //}

  other If(currentElement.className = 'subformSet') { }

  //If the objects are fields, then we'll want to hide their

  other If(currentElement.className = 'field') { }

  //Check to see if the field is a button - don't count buttons

  temp = currentElement.name;

  if (temp.substring(0,6) !== "Button"){

  If (currentElement.rawValue == "" | "") ( currentElement.rawValue == null) { }

  currentElement.presence = 'hidden';

  //Check Jugendherberge exclusion - boxes option

  other If(currentElement.className = 'exclGroup') { }

  / / hide the exclusion group and not the individual radio buttons

  If (currentElement.rawValue = "") { }

  currentElement.presence = 'hidden';

  { } / / end of loop for

  { } / / end function

  Hello

  A table has a class name of the subform, but will have a property of page layout with the value of "table."  If you find one of these, then you sweep that subform.

  But you code seems to have commented, that didn't work for you?

  Concerning

  Bruce

• Returns an empty field

  Hello

  Various bits of scripts that I found online, I managed to get a script to calculate future dates from selections made in another field of work.

  I have a 'Term Stock' field where the customer selects a time span for their contract in a drop-down list. For example 'sheep 100 days' or 'beef 250 days '. Of this I have set up a hidden field (called DAYS TEMP) that simply returns the number - in the case of these examples '100' or '250'.

  This is done with:

  DAYS of var TEMP = this.getField("Stock_Term").value;

  If (DAYS == TEMP 'sheep 100 days') event.value = "100";

  Else if (DAYSTEMP == 'cattle 250 days') event.value = "250";

  else event.value = "";

  The following script then generates a date for that many days in the future as of today.

  G1 var = this.getField ("DAYS TEMP");

  var g = g1.value

  var today = new Date();

  Add var = today.valueOf ();

  Add += 1000 * 60 * 60 * 24 g,

  future var = new Date (add);

  Event.Value = util.printd ("dd mmmm yyyy", futures);

  However, now my client requested that I have an option of "N/A" that can be selected, which returns an empty field. I can easily get my hidden field to return no result, but I can't work, how to get the field generated by the script above, to return a field empty.

  Hoping that I've explained this well enough and that it is quite simple, and I appreciate any help anyone can offer.

  See you soon

  Steve

  So, something like that?

  G1 var = this.getField ("DAYS TEMP");

  If (g1.valueAsString == "'") event.value = "";

  else {}

  Put the rest of the code here

  }

• How to handle the NULL or empty fields XML

  I'm parsing an xml file and transform it into a query object. All good until I get a NULL value or misssing in my XML file and then I begin to receive some error messages like

  The value "cannot be converted to number.

  So, how can I check these missing values or NULL in the XML and then put them to a lack of value, so they keep appearing as "?

  Here is my code: it runs great until I hit a missing value

  < cfset mydoc = XmlParse (myxml) >

  <!--get an array of employees-->

  < cfset emp = mydoc. SET OF LINES. XmlChildren >

  < cfset size = ArrayLen (emp) >

  < cfset orderquery = QueryNew ("FIRST_NAME, LAST_NAME, numero_fichier, JOB_TITLE_DESCRIPTION") >

  < cfset temp = QueryAddRow (orderquery, #size #) >

  < cfloop index 'i' = from = "1" = "#size #" >

  < cfset temp = QuerySetCell (orderquery, "First name",

  #mydoc.rowset.ROW [i]. FIRST_NAME. XmlText #, #i #) >

  < cfset temp = QuerySetCell (orderquery, 'Name',

  #mydoc.rowset.ROW [i]. LAST_NAME. XmlText #, #i #) >

  < cfset temp = QuerySetCell (orderquery, "Numéro_fichier",

  #mydoc.rowset.ROW [i]. FILE_NUMBER. XmlText #, #i #) >

  < cfset temp = QuerySetCell (orderquery, "JOB_TITLE_DESCRIPTION",

  #mydoc.rowset.ROW [i]. JOB_TITLE_DESCRIPTION. XmlText #, #i #) >

  < / cfloop >

  Which column throws the error?  Given that you do not specify the data types in your QueryNew call, I guess that's FILE_NUMBER.  In this case if the first sign up process has a number of this column, then CF will implicitly define this column to be digital.  If that is your intention, very well.  Otherwise, specify the types of data explicitly.

  If this column must be numeric, then you will need to perform a few checks before writing to the cell in the query.  Given that the statement of QueryAddRow() creates a bunch of empty rows with null values in all the columns, you just have to jump from writing to the cells that need to be set to null:

  Notice a few things that I spread the code:

  • No sign of #-you only need within blocks of at the exit of the variables on the screen.  They are almost never necessary in the function calls.
  • No "temp =" in the tag.  They aren't necessary if the operation right of the equal sign does not return a value, you need to store in a variable, as in this case.

  HTH,

  -Carl V.

• Empty field in the load data

  Hello
  
  The customer have a rules file normal, like this:
  Dim1, Dim2 Dim3, Dim4 data
  
  but the workload file can have empty values for member name (end user errors)
  data, 'member1_dim3', 'member1_dim1', 'member1_dim4', 'member1_dim2 '.
  "member2_dim1", "member2_dim3", "member2_dim4", data
  
  Essbase does not send the error to the execution of the load and use the name of the previus sign (member1_dim2 in the example) and the sum or replace data values
  
  The customer needs an error or a warning, how can I force it? or do a load without the registry with the field empty.
  
  Thanks and greetings
  
  Published by: AlfonsoB on 11/25/2009 13:14

  There has been several threads about this. You can have null values to replace rule with a default value. To do this
  Create a text with a characher column or a word I like a Tilde ~.
  Then attach it to the dimenison column (the newly created column should be the first)
  Then, go to the properties of the field and replace the tilde with a default member name (or if you want the line to reject replacing the ~ with something like "reject me" make sure that you check replace whole word only.)
  Then replace ~ nothing of course replace whole word is not checked.
  If you look at the line, you shouldn't see any tildes.

  Repeat for each dimension column that can have NULL values.