IllegalStateException when adding label to the screen from timertask

Similar Questions

• Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

  Original title: cursor goes wild

  My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

  Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
  I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
  You also need to update any driver mouse if possible.

  Let us know if that helps.

  Marilyn

• I have problems to change my password. When I go to the screen to change it refernce keeps going back me to an old AOL address, what can I do

  I can't change my password.  When I go to the screen changes and follow the prompts it returns me back to an old AOL address

  Hello

  ·         What password, you try to change?

  ·         AOL password account are you referring?

  If you try to change the password for AOL, you can follow this link & check if the problem persists.

  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKCPopup&docType=kc&externalId=223103

  Hope the helps of information.
  Please provide us with more information about the issue so that we can help you further.

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• How to detach the screen from the keyboard, and how do I use the touch screen without stylus?

  I have a gateway M285 ta6 t2300 clocked at 1.6 ghz dual core 1 GB 40 GB combo windows 7 tablet laptop 2-1 d. I don't have a pen for the touchscreen, but because I bought it used... I would like to know if I can use the touch screen using my fingers or do I have to buy a pen and if so what kind? Also, I would like to know how to detach the screen from the keyboard.

  Hello

  I suggest that you go to the Gateway Web site and download a manual for the model that will show you how to use it.

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  See you soon.

• Why the font size is so great when adding text to the photo in high resolution?

  Why the font size is so great when adding text to the photo in high resolution?

  Font size is usually determined by the size in points. 72 points equal to 1 inch. the size is independent of the size of your actual file. You might have a file that is located at 72 dpi, which is set to a 5 X 7 "and the police would be the size even if it is a 1200 dpi image 5 X 7.

  

• What is jucheck.exe? It flashes at the bottom of the screen from the moment where I turn computer to turn it off.

  When I turn on my computer until I turn it off, jucheck.exe flashes at the bottom of the screen. He wants to have access to the computer, but when I say no, it continues to blink. What - what, do I need it, how do I get it off the screen?

  Hello

  That's most of the malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to change the screen from Portrait to landscape?

  I changed my screen from landscape to portrait years ago and now I can't go back.  My screen went out and I use a borrowed on the side for now, quite the hassle.  Any ideas?

  Hi DavidMortensen_907,

  • What happens when you connect your monitor to the computer?

  I suggest that you connect the monitor for which you want to change the portrait view and then go to the link thread with similar problem and try the steps mentioned, check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/switching-between-portrait-and-landscape-display/9bdea91e-3e86-4e19-9E23-97193b63e5cd

• Officejet J6480 carriage jams when printing wirelessly via the plugin from HP printing service

  I try to print on my printer OfficeJet J6480 HP all-in-one to my Samsung Galaxy Tab 3 tablet that runs Android 4.4 Wireless using the "HP Print Service Plugin on the tablet.

  Measures already taken;

  Sucessfully downloaded/installed the Service HP Print on shelf Plugin

  Radio wireless to the printer and correctly configured to communicate with the router wirelessly activated successfully.

  Problem:

  When you try to print something from the tablet to the wireless printer, the printer is trying to perform the print operation (flow paper in the printer from paper tray, shows 'Printing' on the printer screen), but then never made a real impression and gets a 'Transport Jam' indication on the printer screen.

  When this occurs above, I opened the hood top, checked for jammed paper in the paper path (Nothing), did tension of printer many times, cycle of fact alignments cleanings and cartridge many times, changed the paper to different types of paper.

  None of these actions corrected the problem...

  I'll also add that when you perform the steps of printing with the radio wireless on off the printer and the cable connected to the printer, the printer functions normally when you print from my pc applications - no traffic jams. Also, the printer works normally when you perform a function 'copy' locally from the printer control panel - not roadways of jams.

  I thought maybe an update of the firmware to the printer could solve this problem - ideas about this being a likely solution?

  BTW - how you normally clear / would correct a cart-jam regardless of printing wirelessly or through an ethernet cable?

  If the firmware update is not a solution, any comment on what could be the cause of the problem?

  If an update is available, could you tell me how to do the upgrade and where can I download it from?

  Thanks for all your comments... Denny

  E - rog,

  Two things I wanted to first of all thank you a lot for the response to my original message concerning the problem of printing wirelessly to my printer HP J6480 of the Tablet, Samsung Galaxy Tab 3 via the Plugin of Service HP Print.

  Secondly, I wanted to aplogize for the very long delay in responding to your... I had some health problems with a family member who prevented me to try your suggestions to the problem.

  I am pleased to report that I managed to solve the problem... I am now able to print to the printer of the tablet.

  A little history on the fix...

  I tried to download and install the update of the firmware from the link you provided, while having the printer connected to the PC (Windows) computer via a USB connection, as you suggest. (It was initially connected through my home network, so I had to first uninstall, then reinstall via USB connection). When you try to install the downloaded firmware it failed, even after several attempts to re-downloading/reinstalling.

  Instead, I uninstalled the printer again, reinstalled over the home network, downloaded the update of the firmware directly from the HP site by locating the printer model, then the firmware. This time the firmware successfully installed (was able to view the progress of installation of the firmware in the display on the front panel of the printer). Make the installation of the firmware with the printer installed on the network domestic (instead fo via USB), the installation process allowed me to search for the printer on the network - it found it successfully and successfully installed the firmware.

  After this successful firmware installation and turn on the wireless radio on the printer (via the button on the front panel), I was able to print successfully from the tablet... YES!

  Needless to say, there is no carriage jam messages as before... and I did not try your other suggestions to go to the HP article on carriage jam error States/solutions.

  I am really gratefull for your response/suggestions...fixing this problem did the usefulness of my tablet to increase dramatically to have the ability to print... cudos to you for your efforts on this forum and a big "thumbs up" for your records.

  Denny

• How to cancel touchstart touchmove is triggered or when I moved to the screen

  Hi all.

  I am building an application of cocktail recipes and used click as the event trigger, but the response time is very slow when I test it on my phone, so I want to try touchstart as the trigger, but if I touch the screen to scroll, when I let go the event where I touched the screen is fired. How can I disable touchstart when I moved or scroll the screen with my finger.

  I've attached a picture so you'll see hpw it is supposed to work. the "button" will be to the image and the text.

  Thank you very much

  

  Thx for your answer Rbyn_cpl

  I added the script fastclick.js for my composition and who took care of the problem. He removed the moulin.300 FRO the click action.

• does not open on the screen from the taskbar.

  I have windows 8. Firefox does not open on my screen. I click the icon in the taskbar, it works, but there is nothing on the screen. When I go on the task bar icon the thumbnail indicates above, then when you click on it, it disappears. You can close the nail of the thumb. That's all that happens. Explorer and Chrome load without problem. I hope you can help with this problem because I use Firefox as my main browser.

  Thank you.
  John.

  Hi John,.
  I'm sorry to hear that when you open Firefox, nothing appears on the screen, but if you place the cursor on the task bar that one windows open can be closed here. You can click on this window to maximize the window that opens?

  What has been recommended in the past is to delete the Firefox profile localstore file, as now corrupted [kb.mozillazine.org/Toolbar_customizations_reset_on_startup]. However, a simpler solution may be reset Firefox starting mode safe it. If you hold down SHIFT and click the icon of Firefox you can do. Questions to troubleshoot Firefox in Safe Mode , reset the profile of this menu.

• Satellite A100: Thin yellow line on the screen from top to bottom

  Since this afternoon here a thin yellow line up and down on the left side of the screen. Reset does not work. It is already there, when I start my laptop. Anyone have any idea what it is? Thank you.

  Hello

  For me, it's like something wrong with the hardware.
  The Satellite A100 is a new model of laptop and I guess you laptop is covered by the warranty.
  I recommend you contact Toshiba service partner in your country.
  Explain the display problem and I? m ensure that guys will help you.

• Apple music I can't search for artist or songs he will list them but when I select one the screen turns white without loading occurs as usual

  in music search function Apple does not list the possible options to select the artist, songs ect. When I select an artist turns off the screen instead of saying loading

  I had this problem on my iPhone 6 Plus, iOS 9.2.1 but I was able to fix it by resetting 'All settings', and then restart the phone. The search for 'Any Apple music' works perfectly now.

• change the screen from vertical to horizontal

  My cat sitting on my keyboard and changed the screen on my monitor from horizontal to vertical.  I'm typing this with my screen, sitting on its side.  How can I fix it.   .. guess the cat is smarter than me.  Thank you.

  Thank you!  That's all.  The ctrl + alt & arrow.  I spent over an hour in the dashboard looking for a 'solution '.