Illustrator CC adds two zeros after each number (size of the pixels, the size of font etc.) (W10)

Similar Questions

• Need to alter (widen) a varchar column, then add two zeros.

  I dug a table of VARCHAR2 column (3) in varchar2 (5)
  and I need to update the 945 values that are not null with two zeros.
  However, when I widened the column he added 2 spaces on the right
  
  ALTER TABLE source_inspection change)
  afs_action_number VARCHAR2 (5)
  );
  Modified table.
  
  
  SQL > Select afs_action_number
  2 from source_Inspection
  3 where afs_action_number is not null;
  
  AFS_A
  -----
  526
  526
  525
  524
  123
  523
  123
  123
  WWW
  123
  521
  
  11 selected lines.
  
  My goal is to increase the column width
  Then the lpad/prefix two zeroes to the left of the number.
  -to go from 123__ to 00123
  How can i:
  (1) expand the column and put the spaces to the left?
  (2) then add two zeros after enlargement?
  (I don't want to change the column varchar2 to a number).
  
  Thank you!
  
  Please explain in detail.

  Something like that?

  update source_inspection
        set afs_action_number='00'||trim(afs_action_number)
        where afs_action_number is not null
  

  Arun-

• Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  This is not a formula, but a constant simple schema of a table complex. Wire remains, then do a right click of the terminal of the initializer of the feedback node and select "create constant. That should do it.

• I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR: NTVDM CPU has encountered an invalid statement." Close to terminate the program.

  I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR:"NTVDM CPU has met an invalid statement. " Close to terminate the program. "The file may be corrupt is either the update.exe from the game or the command.com in windows system32. This has happened before, and the only thing that I did to get the game back is to perform a system recovery (which im gona not remake). I want to know how to prevent the "update.exe" or command.com to be corrupted every update of the game. I tried to contact the manufacturer of the game, but they do not seem to respond immediately. and their forums are not as useful as I thought it would be. PLEASE HELP ME!

  fl0bot,
  The message you are getting means that there is some corrupt system files that could not be fixed.  If you look in the CBS.log file , it should tell you which files.  When you do that, you can try to replace the corrupt files.  However this seems to happen whenever you update it a game then you will need to contact their support for aid as this can be a problem for them.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dynamically add zeros after a number

  Hello

  I need help to write this query.

  I want to add the number of zeros after a few dynamically.

  for example: If number is 2 and the number of zeros to add is 5 then exit final should be 200000;

  I would prefer to_char, even, it seems unnecessary here

  Select to_char(:n1). Double RPAD('0',:v1,'0');

• How can I add two pages just before page 7 of the book, which will change all the page numbers that follow?

  Hello

  I'm close to finishing a book of 257 pages.  All pages are numbered automatically down, and I spent a few weeks carefully constructed an Index at the end of the book that has all the right page numbers listed for everything.  So whatever I do, I can't change my page numbers.

  But at this late stage, I would like to add a few epigraphs (quotations) in four or five places (I just got this idea today, I'm afraid).

  Is it possible to add a few pages here and there (I will add two pages at a time, I know, or he'll hit all the pages that follow, half of them designed to be left, and half designed to be on the right - off) that are not numbered, and that will not affect the numbering of the following pages?

  Kind regards

  Malcolm

  It is not Automatic way. If you are ready to have unnumbered pages which are not included in the number of pages, you can, for each page the inserted value

  (1) select the first page after the pages will be added

  (2) in the menu pages palette, use the Options Section and number and the page number of started with the value what it is already. In this way, adding pages will not affect the numbering.

  (3) in order to avoid conflicts with the new pages page number, set their numbering on something else as 1,2,3. (as i, ii, iii, for example)

  For later use, you can configure your index with the indexing of InDesign tools, if a false problem, as you would have been able to add the pages and then re - automatically generate a correct index.

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• How can I add a comma after each entry of text in an Excel 2010 worksheet

  I have a spreadsheet in Excel 2010 and you want to convert to a csv file to download lists of contacts on Yahoo and Gmail.  All online help says to use a formula in an empty column that refers to a line of text like: = B1 + "","," it doesn't work! I also notice most of the responses are for earlier versions of Excel.  Help!

  If you want to create a CSV with excel all what you need to do is to use save it under and save the file in the csv format.  Following gives more information (ignore the part of import as kind of 'wanted'): http://office.microsoft.com/en-us/excel-help/import-or-export-text-txt-or-csv-files-HP010342598.aspx?CTT=1

• Error message appears after each start up toward the top of my computer.

  Error loading: C:\Users\Michelle\AppData\Roaming\mousel.dll
  The specified module could not be found

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• After each update on Mac, the list of saved passwords is removed, how can it be recovered?

  Operating system: Mac OSX 10.7.5

  If you use time Machine on your Mac, then you can try to recover the two files signons.sqlite and signons3.txt

  • http://www.Apple.com/support/TimeMachine/
  • http://KB.mozillazine.org/Password_Manager

• Two text fields each other also have the values of the minimum and maximum fields?

  I have two text boxes that are mutually exclusive: one is a dollar amount per pay period, and the other is an annual amount in dollars. User can enter an amount in the box of one or the other (but not both), and I used the validation for this below script:

  Field1 script:

  If (event.value) this.getField("Field2").value = "";

  Field2 script:

  If (event.value) this.getField("Field1").value = "";

  Now, I also Inow the field limit with the minimum and maximum amounts for these same fields. But, because the range of field values is an option button other than the custom validation script, it seems that I can't do both because I can choose only one option button:

  

  Is there a way to keep my custom validation scripts so that they are mutually exclusive, but also to impose minimum and maximum amounts for these areas?

  You must validate the range using a script.

  It will look something like this:

  if (event.value) {
      if (event.value<10 || event.value>100) {
            app.alert("You must enter a value between 10 and 100.");
            event.rc = false;
      } else this.getField("Field2").value = "";
  }
  

• tcant open my windows live messaging flag, shortly after each message, error on the bottom left of the page. my email said microsoft has an answer for me very well, but I can't open it?

  If anyone has the answer send to * address email is removed from the privacy * an of my wandering codes 0 x 80048849 can't wait to use windows live, Ive got 14 messages and more, possible, t remove, thank you

  See: a question of Hotmail or Windows Live Mail?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/have-a-Windows-Live-Mail-or-Hotmail-question/8bd31c48-d1a7-49D6-a08c-9069aaeba2e5

• Is it possible to add automatically a comma after each 6 characters was typed in a text field?

  Hope someone can help me.

  What I basically need help is to make Acrobat add a comma after each 6 characters in a text field:

  XXXXXX YYYYYY, ZZZZZZ etc.

  It is a way to do it. Put the following text in the 'Format' event for the field:

  var str = event.value

  pieces of var = [];

  var chunkSize = 6;

  so that {(str)

  If (str.length< chunksize)="">

  chunks.push (STR);

  break;

  } else {}

  chunks.push (str.substr (0, chunkSize));

  Str = str.substr (chunkSize);

  }

  }

  Event.Value = chunks.join(',')

• remove the two zeros of hexadecimal string

  I'm passing an ASCII string of bench to a VI I wrote and I start with "04" and my VI the ASCII get normal "04".  I then have to convert an ASCII string to a Hex string (using a solution of VI, which I found on the web) and instead, having it display Hex '04', it adds two zeros in the Hex display "0004".  I need to remove the two zeroes don't is just "04".  I don't know there is probably an obvious solution (I'm fairly new to LabVIEW). Thank you

  A statement of format for a cast of just wiring operation confuses the programmer. Don't, don't. The value is not important as the type. (.. .and if you want a string, you can't even wire type.) String is the default!)

  What is the representation of the blue zero constant wired scheme down to the left of "hexadecimal string to munber '? Make sure it's U8.

  Please join the real VI, many things cannot determine in a single image. Thank you!