Error message appears after each start up toward the top of my computer.

Similar Questions

• My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54

  My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.

  Hello

  The exact error message would have been very useful because it may be Malware.

  It may be a legitimate program.

  http://support.Microsoft.com/kb/174381

  http://www.fileinspect.com/FileInfo/MSDTC-exe/

  Would that be it: "MSDTC Console?

  And can be malicious:

  http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html

  It can be a boot entry remains of this Malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after the scan post back or if it was malware take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• the Windows Installer appears after each start up, then disappears. If I try to install anything, he stops and tells me to wait a gift install is complete.

  Windows Installer appears after my start, then he explains the preparation of the installation goes. When I try to install or to uninstall it tells me to wait until a current installation is complete.

  I'm totally lost on this one.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us

  J W Stuart: http://www.pagestart.com

• Error message appears after using the recovery CD

  Hello

  I use recovery DVD-ROM. Her work very well but after restarting the laptop, it gives me error, missing some files.
  I try to fix that but still error.

  What can I do?
  If I sent him to the workshop, that it would take 7 days to 2 months. :(
  Last time I have send it take 2 months and had to fix the screen when he in black and not work.

  So please help me here and don t send me for them.
  don't send me to them.

  Hmm. Maybe you n t need to contact the ASP.
  But how someone should help you without any details on the laptop model and the error message?  :|

  Could you post more information?

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• I get the Extended player Fatal Error Message every time my laptop boots to the top and I have no idea why

  I have no idea where this fatal of the extended drive error message. I don't play the games on my laptop, but my wife does in his user ID. We are both this error under our separate message ID. We don't remember to delete all programs, but when I try to install Extended Player it tells me that a critical file is missing. I tried using the Microsoft Cleanup utility, but the extended player does not appear on the list. I don't know where to go from here. Can I get help please?

  Hi Justamurray,

  1. How have you tried to install the extended player?

  2. did you of recent changes on the computer?

  3. What is the version of Windows installed on the computer?

  I suggest that you check and uninstall if you have the extended player program installed on the computer using the control panel.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Note: The link above is also applicable to the operating systems Windows 7.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Windows 7 from XP, receive the error message "Windows could not retrieve information about the disks on this computer.

  Try installing Windows 7 from XP and keep having this error message before choosing my instalation method, Windows not able to retrieve information about the disks on this computer.

  Because the migration from Windows XP to Windows 7 requires a clean install anyway, might as well you are backing up your important files and settings using Windows Easy Transfer and do a custom clean install by booting from the Windows 7 DVD.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• After you have installed the latest version of iTunes, get the error message about AVFoundationCF.dll at startup to the top

  I've been downloding the new version of itunes and my computer froze and I stopped him by holding button turn off and when I go on the computer the next time he says this "C:\Program Files\Apple\Apple Support\AVFoundationCF.dll of the application also does not Tun on Windowns or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  * original title - help me please: (*)

  Hello

  ·                         Follow the information from apple to the link below

  read this information on avfoundationcf.dll

  http://discussions.Apple.com/message.jspa?MessageID=12932050#12932050

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  and also try itunes discussions

  http://discussions.Apple.com/category.jspa?categoryID=149

• Flash lock drive toward the top of my computer when it is run for a long time?

  Original title:

  Flash drive

  Hello

  Why does flashplayer 15-0-0-189 lock up my computer when it is run for a long time?  In addition, why should I use so much memory?

  Thank you in advance.

  Hello

  This can help you that flash can get corrupted:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; after him uncheck the installation of Chrome and Google etc option toolbar:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  See you soon.

• Hidden partition appears when it is open to the top of my computer

  I have recenetly had to do a clean install on my Acer 5520 Notebook. Back up be corrupted when I used the command D2D, I had to do a clean install of WinVista Home Premium 32-bit with my other drive of WinVista pc. I just change the product code. All right, but now I can see the hidden partition when I open my computer. He also made another letter to the different partitions C: is the drive, D: drive used for data to the top what are now the E: drive and the hidden partition is D: drive. My cd burner used to be drive E: is now the F: drive.

  The question I have is this. How can I get which is hidden or masked? and everything back to normal. I'm ready to reinstall if necessary. Help, please.

  http://www.Acer.com/worldwide/support/index.htm

  You will need to discuss with Acer as to how you can hide their originally hidden restore Partition...

  You have installed Vista differently from how it was done in the factory, and how it's done using their recovery Options.

  They installed the recovery partition, not Microsoft.

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

  See you soon. Mick Murphy - Microsoft partner

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  Does anyone else have this problem?

  It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?

  I have the same problem!

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.