Illustrator CC hangs after the installation of the Mavericks

Similar Questions

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• HP Pavilion DV6-2106EA hangs after the insertion of son wired CAT5 (internet)

  HP Pavilion DV6-2106EA hangs after when inserting the cable wires CAT5 for wifi internet works fine

  or wireless works fine. Need help

  Hello

  Unplug your ethernet category 5 cable.

  Download the LAN driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46504.exe

  Then, in the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.
   
  sfc/scannow               (Note that there is a space between sfc and /)
   
  Let the entire process, then the output type and press ENTER.

  Now, right click on the installer you downloaded and select "Run as Administrator" to launch the installation.  When finished, restart the computer and try to connect the cable again.

  Kind regards

  DP - K

• Satellite M50 226 hangs after the victory of logon Wlan is turned on

  Hello everyone,

  I had a problem with my satellite m50-226.
  It happens quite often that when I boot up my laptop a card WiFi is turned on, the computer hangs after windows journal.
  When I type my user password nothing happens and a few seconds later, the background appears but nothing else.
  When I restart the laptop the same problem occurs. only when I turn off the wlan card, I can start the computer successfully.

  Maybe anyone can help me?

  thanx.

  welcome them
  Alex

  Hello Alex

  I am very interested about your problem and it is interested to know if this problem persists if the unit wakes from sleep or hibernation mode.
  Can you please verify this?

• X 1 carbon 2014 windows 7 hangs after the main power connection

  Nice day

  After the Polish Lenovo call center refuses to help me ask you to help. For about a week now, my X 1 carbon 2014 hangs after connection to the power supply. It's so irritating. I think, I only installed the updates regular windows 7 and the update of the BIOS via the lenovo update tool.

  The Polish Lenovo Support Center came with the excellent range of system solution. I really hope that you would be able to help more effectively at the same time.

  Thank you!

  Pawel

  
  

• Java plugin for Oracle hangs after the last update

  As part of the requirement of the Oracle, we run JRE 1.7.60
  To update firefox this morning and now the plugin is constantly crashing.

  Hello

  Thanks for your reply, but I doubt that flash player is related to do with Java.

  And the Java applet crashing in my browser, I guess, should not be linked to my graphics driver, especially since the only update that took place was an update of firefox.

  In any case, Firefox for some reason any launches 2 additional tabs when executing the Java Applet (IE does not work). In the past, I'm used to close the first tab, since it contains nothing except an Oracle logo.
  However, it seems that after the last update of firefox, if this tab is closed, it cause Java to crash.

  Therefore, do not close the additional tabs by the Java Applet. However, this has never happened before, do not know what has changed in the latest version of Firefox to make it happen now?

  Thank you

• Front Panel hangs after the beginning of the routine

  Hello

  I am writing an application that looks a bit like that fixed. The idea is to have a Setup mode after the beginning of the program, where you can enter all the data to specify a test routine. In the first loop representing the configuration mode, I have an event structure that is pretty huge, in fact, because it represents a contextual help for my program, I added. After clicking on the Start button (which is possible only when some tabs from the tab control are selected), I turn off and the Start button gray. After that puts it on, there are several automatic modes and a manual control which are selected depending on the active tab.

  In this mode, the front suddenly freezes i.e. no control will react to my entry.

  I programmed this sample program to get because of the problem. It seems that there is a problem when using local variables and the switch until released action. The problem was solved when I selected the switch when you press mode.

  I applied the same changes in VI I develop, but the problem still remains.

  Someone at - he had an idea, why?

  
  

• Dial-up access hangs after the authenticated message

  switched freezes after authenticated message or register your computer on the network.
  using windows xp
  ISP contacted all my settings are correct and registered with them
  What is the fix for this problem.  help certainly appreciated

  Well, on the off chance that it might help someone here - I found that my problem was related to my McAfee security software. I got a Dell Inspiron (Win XP SP3) who came with McAfee and I had kept the subscription updated. I knew that about when my problem of 'blocking of the system' has started and so I did a restore of the system from that date. Bingo, problem solved. I could get online again.

  However, after the system restore, I noted that my McAfee Security Center was no longer functional. When I reinstalled McAfee (via McAfee account identifier when you're connected via Wi - Fi), I found that the problem of returned system freeze.  I immediately uninstalled McAfee and found I could connect again without problem.

  That was the clincher for me. While I might have spent weeks haggling with McAfee that, I decided that it was not worth my time. I cancelled my subscription and got a security suite from 'black and yellow' guys and things have been fine since.

  It's a long shot, but I hope this helps someone.

• WRT110 hangs after the addition of a new wireless client

  Hi all:

  I have had this problem since I bought the router. After first seen he question, I checked the firmware version and find that I 1.0.04)is. Information on the next release say nothing on fixing this, so I did not bother to update.

  Here's a detailed description:

  I have a home network with approximately 8-10 computers. Eight computers are wired. Two are laptops. I travel every week and whenever I come home and start my laptop, the router needs to be reset. If I did not, none of the computers, including my laptop can connect to the network. In addition, I am unable to pull up to the router configuration page. After the reset of the router (unplug) everything works fine. even the wireless on my laptop.

  I just got used it although it was frustrating for my children. Now I have another laptop for my wife and she connects more often, and when I'm not home. I don't want to have to deal with to reset the router if I have to.

  I've not seen anything like this in the forums, the firmware doesn't seem to be an option, so if anyone has a solution for this, I would appreciate it.

  Thanks in advance!

  You need to reset hard your router to the factory settings and then try to configure the re-...

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...
  Also, make sure that your computer is configured to obtain an IP automatically, disable any firewall, the security software on the computer before you try to access the configuration page...

  I understand you want to upgrade the firmware of your router, but you should give it a try if the above does not solve your problem...

• Windows 8 metro apps hang after the screen saver

  When in the start menu screen of windows 8 after logon after the system remains idle for more than 60 minutes of any style windows app 8 does not open

  ex IE, people, mail, weather, etc.

  'Goto Office tiles' and all the other things like charms work but the applications themselves (all) just stay stuck on the screen to start the application

  Help, please!

  Hello

  Did you make any changes before the show?

  You can run the resolution of the problems of the article below and check.

  Method 1: What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 2: Perform the resolution of the problems of system maintenance. Follow these steps:

  (a) press Windows + W key on the keyboard

  (b) resolution of the problems of type and then click settings under the search field

  (c) in the settings click on find and fix problems

  (d) click on system and security

  (e) maintenance of the system click on follow the prompts from there.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Illustrator CC 2015, after the upgrade from 2014 CC, crashes when opening program/opening file. Says error: operation cannot be completed due to an unknown error. [IMPORTANT]

  In addition, after the opening of the program, he showed an advisor to remove one of the swatches plug-in library, which I did, and it did not help. I tried to uninstall too no effect.

  Please, some advice. I use Windows 8.1

  Solved the problem in a logon session. Uninstalling and reinstalling solved the problem.

  Sanjay.

• Satellite L450D - 11G - hangs after the installation of recovery

  The recovery disc provided does not work. After you install all the files, it goes into a boot loop with "installing Windows for the first time, through 'Please wait', for flashing to the top of the home screen and then stop and restart.

  Is there any solution for this?

  Hey Buddy,

  You must wait a few minutes. On my laptop Satellite and Windows 7, I had the same problem. Windows will be reinstalled several times until the installation is complete and you will always see the same screen.

  Don t so worry about this. Everything is ok with your laptop! :)

• The system hangs after the installation of KB82286198 & KB980408

  system crashes after windows starts after windows update downloaded Security Update kb82286198 02/08/2010. problem solved after that I go into safe mode and uninstall the update even and reset manual download options. Same thing happened in April after Windows update kb980408.

  Hello
  
  Please cross check, the number of update must be Ko 2286198.
  
  This update will protect your system from a remote attacker unauthenticated to compromise your system and take control.
  
  For more information visit http://support.microsoft.com/kb/2286198
   
  You can try to download the update from the link below and install it clean in boot mode.
  
  http://www.Microsoft.com/downloads/en/results.aspx?pocId=&freetext=2286198&displaylang=en (select the update based on the operating system installed on your computer.)
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows hangs after the return of the mode "Eve". Illustrated with BCCode 9f errors

  I have laptop Dell Studio 1555 under Windows 7 Ultimate x 64. The laptop crashes whenever I wake up to "sleep mode" and Windows displays a notification of error with BCCode 9f when restarting. I downloaded a couple of minidumps in this zip-

  https://SkyDrive.live.com/redir?RESID=47083524E19E379D! 132 & authkey =! ALBdqX08T28zvQY

  Need help!

  Hello

  Blue screen can be caused by problems hardware and software, the code of error BCCode: 9f (0x0000009F) occurs because of a mismatch of generation count.

  Refer to the steps in the following Microsoft article.

  Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  "0x0000009F" stop error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2: http://support.microsoft.com/kb/981848

  Notes:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  Keep us informed on the status of the issue.

• XP hangs after the period of one month

  Hello

  For the third time in 3 months I had to reinstall a Toshiba Satellite Pro with Windows XP. After about 3 to 4 weeks, the laptop starts and stops at the start. It keeps hanging when loading personal settings. When I use the recording mode it keeps always suspended. The only way to make it work again is to reinstall windows XP. Anyone know what is happening?

  Thanks for the reply.

  Hi Molema,

  You have installed Windows XP Toshiba disk recovery or normal Microsoft installation disc?

  To be honest it is difficult to say why this is happening, but I think it's software related issue s. No one knows what programs you have probably is also a virus or a Trojan. If you install XP again, I recommend a good software like AntiVir antivirus or something else.