Im getting 800737 error whille B install SP1 update for my windows 7 Home Basic 64-bit machine

Similar Questions

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic)

  Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable file
  x86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fff
  If these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and has already done.

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

  You cannot uninstall a running operating system.  The best you can do is wipe the hard drive and start over, but which will also remove all programs and documents.

  "malayboy" wrote in the new message: * e-mail address is removed from the privacy... *

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

• How to install the 32-bit software on my Windows 7 Home Basic 64-bit?

  I use the family Windows 7 Edition Basic 64-bit. Now I want to install a 32-bit program (software of Rockwell RSView32) which works well on Windows XP Service Pack 2, but the installation of the program Wizard does not open in my Windows 7 Home Basic 64-bit. I tried the shooter of compatibility issues. Even he couldn't help me.

  What should I do to install RSView 32? Can someone help me?

  Thank you...

  Usually 32-bit software installs correctly on a 64-bit system, however, some applications are unspecific and if so, even in compatibility mode is unlikely to succeed

• Can I install Windows 7 home basic 64-bit desktop product key because the key is not in use?

  I have an old laptop Dell Inspiron N4050 have Windows 7 Home Basic 64-bit... and the tour did not work because it was damaged and not repairable. Sir also I have a new desktop PC I want to install the same Windows 7 Home Basic 64-bit. in my new is PC possible to install this same key on my new PC, because the key is not in use
  Details of my knees
  ------------------------------

  If the operating system came pre-installed on your laptop, you can not transfer the license to a new PC...

  While the key is not in use, it's a key assigned to a Dell laptop and it will not work...

• I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install the update ios 9.2.1 Please help installation error!

  I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install error install ios 9.2.1 update.

  what I can't finish the upgrade because of this error, please help immediately, thanks!

  As you change major versions (6-9), the complete installation program must be downloaded. Then, it must be verified and unpacked. Then to do room to write the new while the former is still partially around. He spells that require at least 6-7 GB of free space on the device for an Over The Air update to even have an inkling of a chance to succeed.

  If you do using the iTunes program on a Mac (favorite), download, verification and unpacking occurs in the computer (which has usually a lot more resources than the phone), reducing needs about 1 to 2 GB free space.

• Problems to install a downloaded version of Windows Vista Home Basic SP1 on my mac through VMWARE FUSION

  Hi all

  I hope you can help as I'm going crazy! It's my first MAC if im a complete noob.

  Me being lazy has decided to download Windows Vista Home Basic SP1 from https://emea.microsoftstore.com/UK/DesktopDefault.aspx/tabid-2/ site

  It contains 3 files which I had to download separately:

  Vista_HomeBasic_SP1_32bit_English_Download_Part1_66G - 02017.exe

  Boot.wim

  install.wim

  Once I had downloaded these. I pulled the top of VMWARE AU12EME 2 but could not detect anything. If I then wacked out on a memory stick and ran the .exe on my windows pc. This integrated then all the files I downloaded a good big folder of Vista.

  So once again I pulled up to VMWARE fusion 2.0 but still nothing. I don't know what I'm doing wrong. I heard people talking that I need an ISO file? But I searched all files that I downloaded and installed, and there is nothing similar. The only thing I can think is that I need to burn the VISTA folder I extracted from my pc to DVD and try running disk on my Mac. But that would make a difference that I tried to run from my DESKTOP MAC key and memory? In addition, there is no ISO files.

  Please HELP I'm worried that I just lost my money!

  I did a little research, and it was one of the best hits on How to make Vista DVD bootable with WIM downloaded files that I think sums up your situation.

  Because I had the file oscdimg.exe since Install Kit automated (Windows AIK) I gave it a try and it worked.  In other words, by using the folder of Vista and its content that has been created by you run the files you downloaded you should be able to create a Bootable ISO Image, which you can then use to create a DVD, if you have the right software to burn an ISO Image on DVD.  (Maybe you could do this on the Mac) Although if you want to you have even burn the ISO Image to DVD just copy it on the Mac and assign it to the CD/DVD in the settings of Virtual Machines.

  Other documents you may find useful: Microsoft TechNet > TechNet Library > Windows > Windows Vista > Windows Vista technical library Roadmap > Windows Vista: deployment > Kit to install Windows Automated (Windows AIK) > Deployment Tools Technical Reference > Command - line Tools Technical Reference > Oscdimg command-line Options

  Just to let you know that it took me about 20 minutes to do a search on Google and create the ISO Image and the test that I could start a VM in the Fusion and if you need to download and install the Windows Automated Installation Kit (AIK) to get the oscdimg.exe file it obviously will take you a little longer, but it is doable and the solution vs safer trying to get the file oscdimg.exe or cdimage.exe from a link sent illegally into the file.

  In any case the information presented here can solve your problem of creating a Bootable Image DVD/ISO.

  HTH

• 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

  I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

  Here's the driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

  There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

  The Base system is the JMicron card reader.

  Ethernet is Realtek gigabit

  USB is Intel USB 3.0

  1 unknown is 3D Driveguard

  2 stranger's validity

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Trouble installing Civilization III complete on Windows 7 Home Premium 64-bit

  I'm trying to install CIV III complete on Windows 7, but when I get to disk 3, I get this message below and the installation fails.  Any suggestions on how to fix this problem?

  Error 1334. Cannot install the file 'Civ3ConquestEdit.exe' because the file is not found in the CAB "Data3.cab" file  This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  Error:-1603 Fatal error during installation.

  Consult the help of Windows Installer (Msi.chm) or MSDN for more information.

  Hello

  You are logged as administrator?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to follow the steps and check.

  1 double-click on "My Computer" on your desktop.

  2. click on the drive where you want to install the package. This is usually your drive "C:\". ». Choose "Properties".

  3. click on the security"" tab.

  4. click on the ' Add ' button.

  5. click on 'SYSTEM' under 'name '. Click on 'Add' and 'OK '.

  6. check "Allow" next to "Full control" under the heading "permissions."

  7. click on "Advanced".

  8. check "Replace entries permission on all child objects with the entries displayed here and that apply to child objects" If you are using Windows XP. Click on 'OK '. Check 'reset permissions on all child objects and enable propagation of permissions inheritable' If you use other versions of Windows. Click on 'OK '.

  9. click 'Yes' when prompted.

  10. double-click on the installation package that was previously generating the error. You won't have any problems with it.

• I installed windows vista home basic 32-bit on my desktop pc coming from my laptop

  Since that what he me locked out of my basic functions in computer science because the key codes don't are aligned with windows, I was originally windows xp home edition, I know that it is wrong to try my office with some purchusing high grade a new version of vista, but I would buy it know and get the new code button to go back to my music, photos and so on. How can I get my activation key code to exit the mode limited functions?

  Contact your computer manufacturer and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  Save all your data because it will be lost during the installation of XP.

  Then follow the steps below to do a clean install.

  http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

  Once installed, reload ALL your other programs of original media, or download again.

  Reload all drivers and utilities for your motherboard.

  See you soon.

  Mick Murphy - Microsoft partner

• Installing Oracle Database 10g on Windows Vista Home Basic

  Hi all
  
  I'm confused about the possibility of installation of Oracle 10 g Database Server in Home Basic Windows with Service Pack 1 operating system. Please help me with a confirmation e-mail.
  
  Thanks in advance
  Prasanth

  Hi Prasanth

  Yes, that should be possible, but it's a production database or simply a test database.

  You can always control in metalink if supported, I don't think it is.

  Read this documentation to complete the installation.

  http://download.Oracle.com/docs/CD/B19306_01/install.102/b14316/TOC.htm

• Why do I get the error 1722 when installing the Driver CD with Windows XP?

  I have a problem to install the drivers CD, it displays a message saying that an error 1722 has occurred

  Has tried to do what you say on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument

  But in step 10, when one tried to select the property "Replace entries permissions for all child objects by the entries displayed here and that apply to child objects" and aply, the PC showed an error saying that the registry editor can not set this key selected security or one of its subkeys.

  I tried to install after that and showed the error 1722 again.

  Have you also tried to turn offanti virus?