Im getting the blue screen and the bed, STOP message: 0X00000007E (0XC0000005, 0X820C4033, 0X803EC650, 0X803EC34C), since the installation of vista of new updates, how to fix it.

Similar Questions

• I'm trying to sync my iPad with my laptop. When I connect my iPad to my laptop, I get a blue screen and my laptop stops.

  I have iTunes installed on my laptop

  .

  Get code error on their website or contact Apple technical support.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

  Hello

  I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

  I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
  What I do, he turns to blue screen with the same information.
  Tried to reinstall from the CD of restoration without success.

  Help would be massively appreciated.
  Saad

  Hello

  > Tried to reinstall from the recovery without success CD.
  In this case, it seems hardware problem.
  BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

  But this could be one of the possible malfunctions

• What dose does that say when you get a blue screen and when I update some files made s error

  How can I do to get rid of the problem.

  the blue screen is also known as the 'blue screen of death '. However, it is actually a message that provides information about the crash of windows.

  There are several reasons why the computer would crash and the analysis of the error code on the scree blue of death and the internal error logs may provide a clue as to why the system hangs.

  Although we do not have your error codes, it could be rationalized that in your particular case, the accident may be associated with the update files.

  Thus, one of the possibilities of the accident is that something is wrong with your file system and update of the files on the disk is not possible.

  Maybe your anti viral is badly configured and prevents the updates to your system.  Maybe your system is infected and corrupted files / infected are prevented from being updated with the authentic system files. Perhaps the master file table is not indexed and so update of the files is not possible.

  all these are only indicative, but you can probably see where you are going with this.

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• I have a virus protection, secure, said complete analysis but I still get random blue screens and computer freezing or cutting

  I have Microsoft Security Essentials and am pretty sure that I have downloaded all the tools provide it free. However, my computer will randomly do the blue screen once in awhile or close on its own without no reason.

  What should I do?

  Microsoft Security Essentials is a security software. It does not solve the problems with the operating system that leads to a failure of the operating system (blue screen) which can be caused by many things.

  I'm moving your question to the forum of Windows system repair section, but you will need to provide much more detail so that everyone to not even start you help.
  -steve

• When I go to pogo my computer gets a blue screen and then turns off and rebooths

  When I go to pogo.com I log on my screen turns blue, then wrote about this, but it's on and off fast cannot read, there do not have the time

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• load of win live mesh. try to run and get the "side-by-side configuration incorrect." How to fix?

  Downloaded 2011 live essentials (mesh only). Get the error by-side, removed and recharged, same thing. How to fix on vista sp2

  Hello

  For the different Forums for Windows Live Applications, select the link below

  Welcome to Windows Live Solution Center

  http://windowslivehelp.com/

• can eny help every time I turn on my pc, on that I get a blue screen and a message check disk on C: but he did not need compleat finish get access to drive C

  When the pc is completely booted I try and do a defrag and it will tell a disk check is scheduled to run on the C drive and run a chkdsk/f., I check't calendar and nothing is there to be dun the other thing I foud is two disks are fat32 (drive F G and slaves) but the C drive is ntfs? How is this has happen'd I can change in fat32 or the other and not lose data? and how can I stop this? and when I road RUN and type chkdsk/f. it due not reconice it any idea of each?

  Hello
  Here's how one gives info complete http://www.updatexp.com/windows-xp-chkdsk.html if this post can help solve your problem, please click the mark as answer check on this page, that it helps people who need quick access to answers THANKS AND GOOD LUCK

• I get a blue screen and there is a crash dump.

  Noted windows just recovered from an unexpected shutdown down and this is what I have it please help
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: 50
  BCP1: C3B169CC
  BCP2: 00000000
  BCP3: 906F5203
  BCP4: 00000001
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini092611-01.dmp
  C:\Users\heather\AppData\Local\Temp\WER-159791-0.SysData.XML
  C:\Users\heather\AppData\Local\Temp\WERA86E.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
   

  Hello

  ·          When the issue started?

  ·          Were there any changes made to your computer before this problem?

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).
  I suggest that you follow the steps below.
  Method 1: 
  I would say you diagnose and check if the problem is with the faulty RAM. Follow the steps in the article below
  Run the Windows Memory Diagnostic tool: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista
  
  Method 2:
  It could also be caused by your card graph and other hardware devices. I suggest that you keep your drivers up to date.

  Method 3:
  Start your server in the boot advanced options, and then select " last known good Configuration".

• How to get the Installation of Vista from Toshiba disk?

  I work with Microsoft technical support to solve a security problem on my Satellite Pro A210 and were now required to use a Vista installation disc.

  Microsoft says that I am entitled to an installation of the original provider of my kit disc - Toshiba. But we're not happened with my laptop - only a recovery disc has been provided.

  How can I go on the acquisition of an installation of Vista from Toshiba disk?

  Kind regards

  Kevin C.

  With Toshiba laptop, you'll get the Toshiba CD/DVD facilities only.
  This recovery media is designed for your laptop only.

  Installations from Microsoft Vista disc is not given and there is no way to get it from Toshiba.

  Microsoft can offer that you support if you only use Microsoft installations CD. Using this disk, you can install and repair Vista on each portable office/computer option. Unfortunately with the restore disc it will not work.

• Error code: 0 x 800700002, does not have support for the installation package ' Vista SP2 MBR Update, installing the Zune software for windows phone 7

  Original title: could not find the media to the installation package ' update of Vista SP2 MBR

  I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Update MBR' 0 x 800700002. Please tell us what to do.

  Hi PamelaMaassen,

  You can read the following article and check if it helps:

  A required component cannot be installed when you try to install the Zune software

  http://support.Microsoft.com/kb/944938

  If you're still having problems, then post your query in the connection of support Zune for more assistance:

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  Hope this information is useful.

• error 80072efe and says windows can't get new updates, how to fix this?

  I keep trying to update my windows but this Dungeon on arise and things on the problem report may not help. So someone please help!

  The following link might be worth a visit:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072efe/70dcea4c-F858-E011-8dfc-68b599b31bf5?page=1&TM=1301417800456#footer >

  03/30 / 1109:35: 40 am

• While playing some games I get different blue screens. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT.

  While some games I get different blue screens and I can not understand what causes them, this only happens when I play a bit of some games. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT. I tried a new install of Windows 8 and this problem still occurs these games has worked on the same computer with Windows 7.

  Original title: Windows 8 BSOD

  Tom

  They have been linked to the material (since obviously you re-installed), two of them were corrupted because of the speed of the accident.

  If you're a clocking over please return to default (overclocking pushes the material beyond the design of the ists)

  Please run a malwarebytes scan before starting on the underside

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• I get a blue screen how to fix this?

  Whenever I'm going to Youtube.com or Listenonrepeat.com my computer gets a blue screen and a message saying that the driver does not stop, and as I log back on I get this:

  Signature of the problem:

   

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

   

  BCCode: 116

  BCP1: FFFFFA800A1A84E0

  BCP2: FFFFF88004F8DFE0

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  I tried to solve this problem to a Microsoft website that had information on this subject, it contained a fix for touches me, I had use but no results that continues to be to my computer, please if you have any advice for me, it would be much appreciated.

  
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time