I get a blue screen and there is a crash dump.

Similar Questions

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the blue screen and the computer shuts down.

  Suddenly, I got blue screen and the computer will stop. File that describe the problem

  c:\Windows\Minidump\Mini020611-01.dmp

  Anyone know the cause of the problem? Any security breach?

  Hello

  Security is not usually a problem with a BSOD but it can be. Are you running effective
  antivirus/antispyware/security programs?

  ------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What dose does that say when you get a blue screen and when I update some files made s error

  How can I do to get rid of the problem.

  the blue screen is also known as the 'blue screen of death '. However, it is actually a message that provides information about the crash of windows.

  There are several reasons why the computer would crash and the analysis of the error code on the scree blue of death and the internal error logs may provide a clue as to why the system hangs.

  Although we do not have your error codes, it could be rationalized that in your particular case, the accident may be associated with the update files.

  Thus, one of the possibilities of the accident is that something is wrong with your file system and update of the files on the disk is not possible.

  Maybe your anti viral is badly configured and prevents the updates to your system.  Maybe your system is infected and corrupted files / infected are prevented from being updated with the authentic system files. Perhaps the master file table is not indexed and so update of the files is not possible.

  all these are only indicative, but you can probably see where you are going with this.

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• I get the blue screen, and sometimes my computer freezes just with the vista blue ring

  ORIGINAL TITLE: Major error

  Hello

  Im having huge problems with my PC and Vista.I get blue screen of death and sometimes I don't quite understand, my computer hangs with just the blue vista ring go right around and around. In addition, windows update won't work, but

  I did a search on blue screen errors and found a program that told me which are originally the erros. The details are below:

  
  crash dump file: C:\Windows\Minidump\Mini042712-01.dmp
  This was probably caused by the following module: ntkrnlpa.exe (nt + 0xCDB3F)
  Bug check code: 0x77 (1, 0 x 0 0 x 0 0 x, 0xFFFFFFFF8891BC70)
  Error: KERNEL_STACK_INPAGE_ERROR
  file path: C:\Windows\system32\ntkrnlpa.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrpamp.exe (nt! KeBugCheckEx + 0x1E)
  Bug check code: 0x77 (1, 0 x 0 0 x 0 0 x, 0xFFFFFFFF8891BC70)
  Error: KERNEL_STACK_INPAGE_ERROR
  Bug control description: this bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: ntkrpamp.exe.
  Google search: ntkrpamp.exe KERNEL_STACK_INPAGE_ERROR

  Any ideas, also my windows update does not work? Could it be related to that?

  Thank you

  Phil

  Hello

  You did changes to the computer before the show?

  Follow the methods below to work on the issue.
   
  Method 1:
  The error occurs if thard drive there no matter what bad sectors or other problems. VOU can use disk check and verify commands:

  a click Start, type cmd in the start search box, right-click cmd in the list of programs and then click on run as administrator. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  b. at the command prompt, type Chkdsk/f and press ENTER.
  c. press y when you are prompted to check the drive the next time the system restarts.
  d. close all applications and restart the computer. Note When you restart, Windows checks the drive for errors, and then starts.
  e. once the computer has restarted, try to perform the backup and restore.
  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Method 2:
  You can make the diagnosis of memory problems on your computer.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 3:
  You can also perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, perform step 7: reset the computer to start as usual to the above article

  See also the link to learn more:
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

• When I go to pogo my computer gets a blue screen and then turns off and rebooths

  When I go to pogo.com I log on my screen turns blue, then wrote about this, but it's on and off fast cannot read, there do not have the time

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• I have a virus protection, secure, said complete analysis but I still get random blue screens and computer freezing or cutting

  I have Microsoft Security Essentials and am pretty sure that I have downloaded all the tools provide it free. However, my computer will randomly do the blue screen once in awhile or close on its own without no reason.

  What should I do?

  Microsoft Security Essentials is a security software. It does not solve the problems with the operating system that leads to a failure of the operating system (blue screen) which can be caused by many things.

  I'm moving your question to the forum of Windows system repair section, but you will need to provide much more detail so that everyone to not even start you help.
  -steve

• Im getting the blue screen and the bed, STOP message: 0X00000007E (0XC0000005, 0X820C4033, 0X803EC650, 0X803EC34C), since the installation of vista of new updates, how to fix it.

  That's happened since I've updated to vista with the latest updates, so im pretty ticked off.

  Now, ive tried many things bootrec - so im not really familiar with it at all.
  in some cases, he said I had - 0 - installations on my computer.

  So I tried it - bcdrebuild and it is found 1 and I changed and that did nothing.

  Nothing seems to work.

  It does not start in SafeMode either, so I can't simply uninstall problems.

  I really need help. Im getting married and all my info of honeymoon is on outlook, which
  I can't access my desktop computer.

  Help me please.

  JAS

  P.S - Oh and restore disc I tried to ive, that does nothing either, there are lots of problems
  but does not fix any of them.

  And I don't seem to have any system restore points, but windows tells me that what makes
  them all the time by updating.

  Hello

  Make a Restore Point while it works

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =================================

  Check the updates of Windows to see if load anything, especially updated drivers, just before that the problem started.

  Configuration-updates Panel Windows.

  =================================

  Personally, I would take the opportunity while it is trying to back up my data and update my major drivers.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• can eny help every time I turn on my pc, on that I get a blue screen and a message check disk on C: but he did not need compleat finish get access to drive C

  When the pc is completely booted I try and do a defrag and it will tell a disk check is scheduled to run on the C drive and run a chkdsk/f., I check't calendar and nothing is there to be dun the other thing I foud is two disks are fat32 (drive F G and slaves) but the C drive is ntfs? How is this has happen'd I can change in fat32 or the other and not lose data? and how can I stop this? and when I road RUN and type chkdsk/f. it due not reconice it any idea of each?

  Hello
  Here's how one gives info complete http://www.updatexp.com/windows-xp-chkdsk.html if this post can help solve your problem, please click the mark as answer check on this page, that it helps people who need quick access to answers THANKS AND GOOD LUCK

• I'm trying to sync my iPad with my laptop. When I connect my iPad to my laptop, I get a blue screen and my laptop stops.

  I have iTunes installed on my laptop

  .

  Get code error on their website or contact Apple technical support.

• While playing some games I get different blue screens. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT.

  While some games I get different blue screens and I can not understand what causes them, this only happens when I play a bit of some games. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT. I tried a new install of Windows 8 and this problem still occurs these games has worked on the same computer with Windows 7.

  Original title: Windows 8 BSOD

  Tom

  They have been linked to the material (since obviously you re-installed), two of them were corrupted because of the speed of the accident.

  If you're a clocking over please return to default (overclocking pushes the material beyond the design of the ists)

  Please run a malwarebytes scan before starting on the underside

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

  Hello

  I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

  I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
  What I do, he turns to blue screen with the same information.
  Tried to reinstall from the CD of restoration without success.

  Help would be massively appreciated.
  Saad

  Hello

  > Tried to reinstall from the recovery without success CD.
  In this case, it seems hardware problem.
  BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

  But this could be one of the possible malfunctions

• When I turn on my computer with windows xp on it I get a blue screen that says dumping physical memory

  When I turn on my desktop computer with windows xp on it I get a blue screen telling me that it is dumping physical memory.  Why it does this and what I can do to fix the problem?

  Hi KarenSellers,
   
   
  -What is the exact and complete verbatim of the error message that you receive? Thanks for mentioning the same thing with the error code that is displayed with the blue screen.
   

  Method 1: Try to start your computer in Mode safe mode and check if Windows loads successfully.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Check out this link to do the same thing:

  A description of the options to start in Windows XP Mode

  Method 2: Use the Windows Memory Diagnostic tool to check if there is an error with the memory.
   
  Refer to the section "using the Windows Memory Diagnostic tool" from the link given below for the same:
   
  How to troubleshoot the facilities of RAM

• I get a blue screen how to fix this?

  Whenever I'm going to Youtube.com or Listenonrepeat.com my computer gets a blue screen and a message saying that the driver does not stop, and as I log back on I get this:

  Signature of the problem:

   

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

   

  BCCode: 116

  BCP1: FFFFFA800A1A84E0

  BCP2: FFFFF88004F8DFE0

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  I tried to solve this problem to a Microsoft website that had information on this subject, it contained a fix for touches me, I had use but no results that continues to be to my computer, please if you have any advice for me, it would be much appreciated.

  
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time