iMac 21 retina or Macbook for the color with Eizo or Benq monitor work?
I have an old Mac Pro and LaCie 321 monitor. Now looking to upgrade, I would like your comments and suggestion. I'm not a fan of large monitors I prefer monitors from 20 inches to 24 inches. I have an Epson 3880 printer to print my fine arts and used printers for my illustrations. I used illustrator/Photoshop and applications Photo Designer/affinity affinity.
Should I get new Apple iMac 21 inch Retina to go with EIZO CX241 or PG2401PT Pro 24 BenQ?
Or
MacBook Pro 15 inch Retina to go with EIZO CX241 or PG2401PT Pro 24 BenQ? The problem is that I carry my laptop around with me and I can worry about cables that will be kept Plug and unplug the device for the second color monitor work Eizo or BenQ.
I don't know if the iMac or laptop will do with different with monitor Eizo or BenQ?
Kind regards
Simon
They have all two internal programmable LUTs - if that qualifies as graphics card is probably semantics. In the Eizos, it works in 16 bit depth, in the BenQ 14 short. But this means that the calibration is performed internally in the monitor and not the video card. The point is that corrections are possible without risk of banding and artifacts that you check frequently with the calibration of the standard video card. You also have a much more precise control over the parameters of calibration (white and black).
The monitor profile, used by applications only, color management is of course a different question.
Tags: Adobe Developers
Similar Questions
-
all my tabs are now configured the correct colors except when I open a new tab. Is it possible for me to put the new tab to a specific color? I prefer the new tab to open a blank page (no url address). Is there a code in the definition of the color options for the colorful tabs?
You are welcome.
Could you please click the button "solved it? This will help others looking for a solution to the issue.
Thank you.
-
Problems converting hex to int for the color to the graphics paint method Blackberry 6, 7
I have to analyze the hexadecimal value say #a9a9a9 of the JSON parser and save to DB.
In my application, this hexadecimal value must be extracted and converted to color for the color of text using the method of graph paint.Used to record in DB data type is string. But I am facing problem when trying to convert the hexadecimal string
in full. Get exception hexadecimal number value being greater.Please help me!
If your string contains "#a9a9a9", then you should skip the "#". Thus, the code you need is probably something like:
Integer.parseInt (hexstr.substring (1), 16);
I am sure that it doesn't have to be top of the case, but if they always give a problem and you confirm that you are passing in 'a9a9a9', then you might consider making capital letters.
-
Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.
Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.
I was wondering if I saved a layer somewhere and set it as a default value.
If you group the layers, you will be left with a single layer, thus spreading your concern.
Suggest that you do the following:
- Make sure you have the latest drivers for your printers
- Reset the default preferences.
Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.
Items nearby and let regenerate the file.
-
My internal camera on my MacBook at the beginning of 2008 Pro does not work
My internal camera on my MacBook at the beginning of 2008 Pro does not work.
One of them will solve your problem of camera:
(1) If your Mac restart does not solve the problem,
(2) use http://support.apple.com/kb/HT2090 from Apple.
(BTW - troubleshooting section called an "iSight" camera. However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD." Whatever the name of your built-in camera, the same info and troubleshooting applies.)
Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account. Do NOT use the 'Guest' for this test account. If you don't have more than one user account for testing, create one now. If you need help, how is explained in http://support.apple.com/en-us/HT201754.
A 'Standard' user account is all you need for the tests.
(3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk. Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.
(4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.
Post edited by: Jim EZ
-
Hello
I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:
No writable calendars are configured for the invitations with the provider for Google Calendar.
My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.
I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.
What can I do? Is there a solution for this?
Thank you!
DanielUse CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
Or you may want to try CalDAV.
https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/ -
Where is the support for the iPhone with some of these issues? It's amazing that none of the iphone Tech responded to the unanswered questions.
This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.
-
Prefs in user.js for the Mozilla rich text editing has stopped working
Prefs in user.js for the Mozilla rich text editing has stopped working. He worked, then stopped. you had to do system restore. user.js file replaced, does not work
This has happened
Don't know how many times
solved with this
-
My new laptop usb port for the left side does not, only 1 work on 3 Please help me
Hello:
Have you installed the drivers for W7 32 bit amd chipset?
If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.
You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032
-
If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?
Hi elvirkaric,
Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:
The application-specific permission settings do not local Activation permission for the COM with the CLSID server application
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.
Anyone has an idea why I get this error?
WaltSame thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.
Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.
From another forum, although it applies to a different application, same principle:
1. open Regedit.
2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
3. right-click on it and select authorization.
4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
5. apply a full control.
6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
7 right-click on it and select authorization.
8. click on Advance and change the owner to administrators.
9. click on the box that will appear below the line owner.
10. click on apply and grant full control to the administrators.
11. close all tabs and navigate to the administration tool.
12. open component services.
13. click on the computer, click my computer, and then click DCOM.
14 find the corresponding service that appears on the display of the error.
15. right-click on it, and then click Properties.
16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
17. check enable local.
{D63B10C5-BB46-4990-A94F-E40B9D520160}and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
-
How to sample the color with the eyedropper tool and have it be the foreground color?
How to sample the color with the eyedropper tool and have it be the foreground color?
Use the keyboard shortcut to set the default foreground sample.
The sample of foreground (top left in the screen shot) is visible and you just click on the color with the eyedropper tool to change.
You can also use x to exchange the undertone in the foreground if you want to change that.
-
paid for the subscription, but Muse CC does not work, he asks me the serial number
paid for the subscription, but Muse CC does not work, he asks me the serial number, any help?
Hello
Depending on your operating system, please try the following steps
Windows
- Click on the start"" menu. Select "All programs" and then "accessories."
- Right click on "Notepad" and select "run as Administrator"
- Click "Continue" on the "Windows needs your permission" dialog box
- When Notepad opens, click file, and then select open
- In the file name field, type the following text:
- C:\Windows\System32\Drivers\etc\hosts
- If all of the entries in the host file include keywords such as "adobe", remove these entries. These are used for the purchase of licenses Adobe.
- From the menu, select 'file', 'save' after changing
- Restart the Muse
Macintosh
- Click the "Finder". Select the folder "Applications".
- Open the "Utilities" folder and select "Terminal".
- Type the following command:
- sudo nano/etc/hosts
- Enter the password associated with the user of the OS when prompted
- If all of the entries in the host file include keywords such as "adobe", remove these entries. These are used for the purchase of licenses Adobe.
- Press CTRL + o to save the file
- Press Ctrl + x to close the file
- Restart the Muse
Let me know the result
-
Bug 7372061 R12 APPROVAL INITIATE BUTTON IS grayed OUT FOR THE BILLS WITH WI
Hello
Is it patch available for > > > > Bug 7372061 R12 APPROVAL INITIATE BUTTON IS grayed OUT FOR THE BILLS WITH TAX WITHHODLING
In workbench Bill initiate approval checkbox is grayed out for the Bills with the withholding tax.
Fixed apinvutb.pls 120.44.12000000.15
I tried to search on metalink but theres no such fix name.
Thank youHello
I think that you have nothing to do at the moment. As suggested before, log a SR and do escalate the issue.
Good luck!
Kind regards
Hussein
Maybe you are looking for
-
When I stop my iMac for the day and then return after day and turn on the Firefox itself has resized small again. I need to hit ' command + ' to the size I want. It is used to suspend the size I had put a page after a stop and after restarting the sy
-
HP motherboard for 17-f113dx laptop
Hello. Could someone give me an idea where I can get a motherboard for the laptop computer HP 17-f113dx model at a good price. Thank you very much.
-
BlueTooth and S1: Toshiba stack moved (Topic deleted?)
Hello! I posted a new topic on my Toshiba BlueTooth stack installation problem on my Tecra S1 after installing XP SP2. This topic has obviously been deleted, I have no idea why. So, here's my question again:When you try to install the 3.10 battery, a
-
Re: PORTEGE R500 IS SERIOUSLY DEFECTIVE 2
Not only, it becomes so hot that typing becomes uncomfortable, or wakes suddenly in hibernation, the fingerprints in the shade sensor systematically after only a few months after the purchase! I read that it could be due to an update of Internet Expl
-
Satellite A500 - HARD drive will not show up in BIOS
Hello My A500 worked very well the last few days and now it has just stopped so I tried to reinstall windows, and it says something about not being HARD drive not in the BIOS so I checked the BIOS and its not there, but in the windows 7 install disk