HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

Similar Questions

• help that my usb ports on the left side do not work

  I have a hp pavilion dv6-6117dx. the usb ports on the left side are stoped working. I need help please...

  A factory restore can't hurt, and it can fix it. First of all, I think I'll try re-installing the AMD graphics driver which usually includes the motherboard drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98292-1&cc=us&DLC=en&LC=en&OS=4063&product=5177781&sw_lang=

• ENVY of HP dv7-7265er - USB ports on the right side does not

  Test of the UEFI BIOS (after update F.10 F.29)

  Check USB port: FAILURE

  FAILURE ID: QWB664-6GX74K-QFPK0K-8D1W03

  PRODUCT ID: C6D03EA #ACB

  Hello

  Please find the link manual below the part number is USB card (includes cable) 681986-001 & check the page numbers 73 component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• HP touchsmart 520: usb ports hp touchsmart 520 side does not

  usb ports side Device Manager does not tell all the works, but nothing picks up, but ports usb back all work

  Greetings @idwer16.

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that some USB ports do not work on your system. I'm happy to help you with this. As a start, please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  The side ports worked before?

  Are the version of USB ports on the side of 2.0 or 3.0 on your model?

  Have you tried updating the drivers on your computer? If this is not the case, the HP Support Assistant could help with this. On most models done component USB on board chip set drivers.

  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows 7)

  Another document that could help may be Computers HP - troubleshooting USB (Windows 7) connections.

  Please let me know if none of this works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• USB ports and the sound card does not

  My sound card and arrested USB ports stopped working.

  I have no sound.

  Sony Vaio VPCEA3BFX

  WIndows 7

  I have restored all the drivers, performed troubleshooting tasks all the recommended other than a complete restoration. What else can I try?

  Hello truck,.

  Thanks for the post.

  Try the following troubleshooting steps:

  Audio problem:

  1. Reinstall the audio driver: Realtek High Definition Audio Driver.
  2. If the problem persists, follow these steps: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1009501
  3. Next step is the recovery of the system: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1027232
  4. If the problem persists, contact the Sony service team: http://esupport.sony.com/US/p/service.pl

  USB problem:

  1. Reinstall USB drivers: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1004056
  2. If the problem persists, perform the hardware diagnostic test.
  3. Make sure that any external USB device is connected with the computer during the whole process.
  4. http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1019507
  5. If the problem persists, restore the system to a previous date: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813
  6. If the problem persists, perform a system recovery.
  7. Then, contact Sony service team.

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K

• My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Of course, it sounds like a hardware problem, not a a Windows.
  Contact Acer for repair.

  Ken Blake, Microsoft MVP

• Satellite M300 - works only one USB port on the right side

  Hello

  in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
  Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

  And what happens if you connect the external USB mouse?
  It work?

  > I have the toshiba recovery of the burned disc, should I use it?
  Why not, you can test it with the new operating system preinstalled too.

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• How to tie two additional monitors for the new laptop Alienware 15 for the purpose of the game.

  So Im wondering how I'd go on the attachment of two additional monitors for the new laptop Alienware 15 for the purpose of the game. I hope no lag between the monitors. Is chaining possible? If it is still possible that would have my monitors need connections?

  Yes.

  Yes.

  N °

  N °

  If that's enough?

• HP notebook a1u60av my ports on the left side 2 stop working. Once again

  Hi This is my second time that my ports on the left side are out. the first fix was great.  the usb on the right work well.    Maybe I need to replace the ports. under the Device Manager it say they are o k you can help me again. Thanks again my model is two years.

  BillyG

  [Personal information]

  to (KNRK) thank you very much. I am so happy that everything on the laptop works very well. all usb. again, the hp forum is really the life line.  meaning, I have been using the forum, I became a little more knowledge and a little tech savvy.   you make me proud of myself.    Once again thank you.

  Billy 'g'

• Pavilion a6120n: USB ports and slots memory card does not

  My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

  I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

  Here's what I've tried so far.

  Run antivirus software. Full scan & scan memory - no problem

  Don't scan complete malewarebytes - no problem

  I tried to reboot several times without success.

  Catering to several previous = failure restore points

  Computer restart in repair = failure mode

  Use the repair disk I did = failure

  Control the management of the power supply for each usb port see if power was properly routed = ok

  Removed the cover of the housing and carefully inspected the cables and connectors.

  Finally I tried to uninstall the drivers usb = failure

  After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

  Still no usb or memory card function.

  Any help would be appreciated

  Thank you

  MrBob38

  OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

  I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

  After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

  I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

  I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

  Thanks for the comments, and I consider this problem to be solved.

  MrBob38

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye

• I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

  I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

  Hello Amaliada,

  Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
  Plug in your mp3 player and open Windows Media Player.
  Click in the empty space (next), then select 'Tools' > select 'Options '.
  Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
  From there, you will receive information about the addition of your device.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.