iMac 5 k camera light does not

Similar Questions

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• smart phone: camera flash does not

  Camera flash does not

  After running diagnostics of hp on the rear camera happened, the flash hardware is now working very well.

• Police Segoe UI Light does not

  Segoe UI Light does not work in Firefox 8 when you use it in CSS.

  You may need to use additional selectors to get this specific light family group Segoe UI font.

  See this for an example on Arial.

  • [797446/questions/797446]

• Satellite M30: Wireless light does not come

  My wireless on my laptop light is not.
  I switch wireless enabled but the light does not come and my router is turned on.

  Also, I can't check the local networks.
  Could someone help me identify this problem?

  Hello

  The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

• PPP light does not blink

  The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

  Hello

  These websites is secure? You did changes to the computer?
  What Internet browser do you use?

  Method 1.
  For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

  Method 2.
  a. If the problem persists, I recommend allows you to optimize the internet explore.
  See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How reset internet Explorer?
  http://support.Microsoft.com/kb/923737
  IE reset warning:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• motion eye camera / webcam does not work. "" Installation when trying to install the drivers, it says "failed".

  Original title:

  motion eye camera / webcam does not work.

  I have not capture camera utility installed on my laptop and when I download site sony vaio, it says the installation failed.

  model is sony vaio VGN-CR19VN

  Hello

  You encounter an error message and the error code during the installation of the driver?
   
  Uninstall the drivers of webcam completely from the laptop and reinstall in the clean boot state.

  Link to download the drivers:

  http://www.Sony.co.UK/support/en/product/VGN-CR19VN_B/downloads/SOACCU-01363010-UN_3265 

   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7, of the above, provide the KB article.

  I hope this helps!

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• The Microsoft camera app does not work... I got the message: 'Add photo '...

  I have improved my Pavilion dv6-2151lc to Windows 8...

  The Microsoft Windows 8 camera app does not work... When I opened the application, received the message: 'Add camera '.

  I tried to download the drivers from HP, but found no driver Webcam for Windows 8...

  Try your Win 7 webcam software, should work to win 8:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49996.exe

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• "Accu full, 100%" but the green light does not illuminate.

  Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

  No idea why - and how to fix it?

  Thank you.

  Hello

  What brand / model of the laptop?

  If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
   
  See the link, then run the Fixit.
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
  Method 2:
  
  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

• I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  bavarian1 wrote:

  I'm sure that my computer is up to the task, but I don't always have the answer No 14 elements camera raw support the d810 nikon?

  John

  I told you in my first post "in short, PSE14 may", Yes, the PSE13 and 14 support Nikon D810.

• Camera RAW does not display my Canon 5 d MK III properly files.

  Camera RAW does not display my Canon 5 d MK III properly files. I have version 9.3.1. The same file is correctly shown in Lightroom and when I open this file in Camera RAW in Photoshop the image appears correctly.

  Please watch

  Hi Theovanh,

  Could you please let me know what is the problem with images in Camera Raw.

  Also, please uncheck the option "use graphics processor" in Camera Raw preferences.

  Kind regards

  Tanuj

• Settings the Camera Raw does not Photoshop

  I'm going to bridge to open my CR2 files in Camera Raw. I do all the settings I want and then when I save or open in Photoshop, all settings apply with the exception of the reduction of noise! Everything goes no matter if I open it in Photoshop or simply click "Done" and return to the bridge. My noise reduction does not follow... When I open the image in Camera Raw again, the noise reduction is still all there. What is going on?!

  
  

  (Photoshop CC 2015.0.1, Camera Raw 9.3.1 Macbook Pro, Canon EOS 60 d)
  

  Please see the discussions below.

  Camera RAW does not save the changes to the original file

  Camera RAW does not staying in Bridge/Photoshop

  Kind regards

  ~ Mohit

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.