CD drive does not open and the light does not work
original title: single CD player problem
The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.
My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.
When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D". It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.
I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.
WTFFF ideas? I really hope that its not the motherboard
There are two cables you need to connect to the drive, one for data and one for power. You must connect both training at work. If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.
"Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *
Sorry, im just of knowledge about computer hardware. you say that I should try a different agreement or another port to plug in?
I tried to connect on a couple different SATA ports on the motherboard.
Tags: Windows
Similar Questions
-
I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom
The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?
http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!
-
whenever I click on a program, that it does not open and the 'open with' screen appears
whenever I click on a program, that it does not open and the 'open with' screen appears
Hello
Use above message for intense and thorough check for malware.
To restore the ability to run any .exe programs.
1 make a Restore Point so that you can come back if necessary back although probably not required.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
Click on it and FUSION - REBOOTDO NOT COPY THE LINES
-----------------------------------------------------------------Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\. [EXE]
@= "exefile".
"Content Type"="application/x-msdownload".[HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
@= "{098f2470-bae0-11cd-b579-08002b30bfeb}".[HKEY_CLASSES_ROOT\exefile]
@= "Application".
"EditFlags" = hex: 38, 07, 00, 00
"FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\DefaultIcon]
@="%1"[HKEY_CLASSES_ROOT\exefile\shell]
[HKEY_CLASSES_ROOT\exefile\shell\open]
"EditFlags" = hex: 00, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shell\runas]
[HKEY_CLASSES_ROOT\exefile\shell\runas\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shellex]
[HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
@= "{86C86720-42A0-1069-A2E8-08002B30309D}".[- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]
--------------------------------------------------------------
DO NOT COPY THE LINESIf necessary:
Check the fix of exe here
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.htmlAlso check this one if it applies
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.htmlHow to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlI hope this helps.
-
ENcypted file does not open and the key file is lost.
Hello
Does not open my encrypted file and the key is lost. I did it in windows 7 and my system crashed. I then restoed operating system, then my encrypted file does not open and the key file is on the same partition and also, he was gone. It of a personal record and is very important and punch. I tried to take possession of the file and that did not work I was wondering if there is a tool or method which can decrypt the file. I know that their around the key file, or if there is a way to get the certificate... Please help. Thank you for your help and answers.
If your certificate and key are lost or damaged and you do not have a backup, you will not be able to use the files that you have encrypted.
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-lose-your-file-encryption-key
"What to do if you lose your file encryption key.http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-an-encrypted-file-if-I-am-denied-access
"How to open an encrypted file if I am seen refuse access?"Cordially,
-
Original title:. Nothing works.
All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.
Safe mode?
Looks like you have a virus/trojan/worm infection pretty good...
Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility. Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.
-
Satellite A200 - 19K: double keyboard lights up and the mouse no longer works
Hello
I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.
I can't find why it does this in the manual and what is the purpose of light with symbols on it.The symbols have a purpose. Thank you very much
Hello
As far as I know that not all mobile A200 were shipped with this function called TouchPad/Dual Mode Pad touchpad
The dual-mode tablet buttons provide many different functions such as:
1.) button to -> it toggle cursor mode and the mode button.
When you switch the button mode button flashes blue and the mouse does not work(2.)-> volume button increases or decreases the volume of the speakers and headphones
(3.)-> e-mail button starts you mailbox to receive and send emails
4.) button ConfigFree -> starts the ConfigFree tool
5.)-> Windows Vista Photo Gallery button starts the Windows Vista Photo Gallery
The other three buttons to the bottom of the trim can be configured with different functions.
Please refer to the properties for pad synaptic dual for more details!
-
I deleted the driver for the mouse and the mouse and the keyboard has stopped working.
I had installed an updated driver mouse and mouse keep locking up. The Windows troubleshooting information indicates that I have to erase the disc from the mouse, and then reinstall the new mouse driver. When I deleted the mouse driver, the mouse and the keyboard no longer works.
The computer is running Windows XP with Service Pack 3.
The computer is one that I built several years ago.
I tried the things:
1. I tried the ALT, left SHIFT + Number Lock which is indicated as mouse keyboard operation who has worked in the past.
Well it does not either from the keyboard is dead.
2. I tried PS2 Mouse and a keyboard.
3. I tried a keyboard and a USB mouse. The system shows new hardware found and he wonder then click NEXT to load the driver. No mouse, no keyboard, so no click.
4. I can't get into the bios, because I can't hit keys to vector in the bios during startup.
5. I tried to load the Windows XP disk, but the startup routine ask me to hit any key to boot from the CD.
I have no mouse or keyboard control and therefore cannot respond to any action required by the system.
Does anyone know a way to solve this problem?
Solution of my wife - buy a new computer.
Have a better solution for this problem?
Thank you
Bill
Always try a PS/2 keyboard. Maybe your PC is not able to access the BIOS, because the keyboard is USB.
What make / model of the keyboard / mouse "kit"?
-
Blocks - Spooler subsystem or the display driver did not work properly
I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?
Hello
1 when was the last time, he did not work properly?
2. the accident happens at random or when executing a particular task?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Check if the problem persists, if she does not follow the steps in method 2:
Method 2:
This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.
I also suggest you to follow the steps mentioned in the link and check.
Do not operate the automated FIXIT. Follow the manual steps and check.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894/en-us
(Also applies to Windows Vista)
Method 3:
You can also update the display drivers on the manufacturer's Web site or use the link below.
Updated a hardware driver that is not working properly
See also:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Hope this helps and keep us informed if you need help.
-
DVD disc drive tray keeps opening and closing constantly
FOR WINDOWS VISTA HOME PREMIUM EDITION
DVD CD ROM DRIVE TRAY KEEPS OPENING AND CLOSING CONTINUOUSLY - GET COMPUTER TO READ DISCS AT ALL - OTHER ASPECTS OF THE COMPUTER RUN FINE - DIAGNOSIS SAY THAT HE DIDN'T THERE HAS NO PROBLEM WITH ANYTHING.IN DEVICES, I NOTICED THAT DEVICE DRIVER IS FOR ARCSOFT - THIS UNIT HAS BEEN IN FOR REPAIR, AND I ME ASKING IF IT WAS CHANGED FROM MICROSOFT DRIVER AND WHY? REPAIR SERVICE DID NOT WARN THIS CHANGE.CAN ANYONE HELP.SAPPHIRE.The device driver can say Arcsoft because it may have provided to Microsoft by them.
In Device Manager, open the Properties window for the drive, and then click the driver tab, then update driver... Click the search selection automatically. If it finds a driver, let it install.If the drive still cycles, then you can have a bad drive. If it is still under warranty, contact the place of repair for repair or replacement.
SC Tom
-
When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.
Hello
Check with the manufacturer of the system, their online documentation and drivers, diagnostics, and
Ask problems known in their forums. You may also check those similar
resources on the site of the manufacturer of the actual device (for the original drive).=================================================================
It is not surprising that the same issue affects the old and the new drive.
This problem may be caused by the presence of too many CD/DVD programs competing for resources,
especially by these programs that run at startup.Even if the error is not Code 22 check these:
Code 22
http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspxHow to fix the Code 22 errors
http://pcsupport.about.com/od/errorc/a/code-22-error.htmHow to enable a device in Device Manager in Windows Vista
http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htmIf necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Satellite P10 PSP10E shutdown and the light stays on
Hello
I'm having some problems with my old man (2004) Satellite P10 PSP10E-0SCM7-FR
One day he simply closed (as if power, no BSOD) and the power and the led for WIFI and the CD/DVD button remains lit.
Most of the time I can't activate it under as the power button is still on. (Power button, WIFI, and CD/DVD are on).
I tried to remove the battery and unplug the computer for at least 30mm
I tried to press the Start button for a period of time (one minute) then disconnect everyting (battery and power cord) at least 30 minutes before to turn it back on
I have reinitialzed the computer using history CD provided with the computer
I removed the radiator cleaned as well as the fan and then replace a new thermal grease
I changed the memoryYet I still have the same problem, for some reason, the computer simply shutdown and the light stays on. Occasionally, the power light start, and I am able to restart the computer. But I'm unable to understand what makes the computer is shut down, or when that happens, what makes the power light turns off and make it possible to start the computer again.
No idea what's going on?
The Start button / stop and led market would be an error message?
If so, what that means?Any help is very appreciated. Thank you!
Damien
lighting even when taking the battery and unpliging for a while (30mm in an hour)
Hello
Usually, books closed due to the high temperature and in this case, the unit must be disassembled and cleaned professionally, but it seems that you already have what I read in your post above.
Probably its a motherboard problem.
The RAM modules appear to be checked and is not RAM issue.
So problem mobo is possible -
Hi Experts,
We currently use scripts UCCX 7.0 with opening and closing hours of CSQ controlled via defined under the time of day in the script.
I would like to know if it is possible to control the opening and the closing time of a script based on an agent is connected or not?
So basically, the office is deemed open when an agent is connected and deemed closed when there is no connected agents regardless of the time.
If possible, can you kindly point me in the right sense of how implement this corresponds to the script.
Kind regards
THERE.
Hello
Sure... in short:
-Use a step "to obtain the statistical report" to see how many officers is connected, or "ready" (your choice) and store that in an int variable
-If this > 0 then 'goto' your behavior variable open.
-If it is 0 or - 1, then goto closed.
Aaron
-
creaky opening and the sound door banging
How do I turn off the sound of the door opening and the door slams sound?
When you hear these noises?
In general, go to control panel > sounds and Audio devices, and click on the "Sounds" tab On the background, part of the tab is a box under the heading "program events". Scroll through this list. Every event that has an icon of the left speaker has a partner. When you select an event by clicking on it with your mouse, the audio file appears in the box under the heading 'sounds '. To preview a sound, click the play right out of the box 'Sounds '.
If you find events that produce the sounds of the door you can change the sounds associated with these events by using the drop-down list or the Browse button. If you don't want any sound, use the [None] entry at the top of the drop-down list.
If you make changes, OK your way out. Otherwise, close the dialog box by clicking the Cancel button.
-
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
Hello
You can use the Windows 8 Compatibility Center to find out if a device is compatible.
Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/homeFAQ - Windows Compatibility Center:
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ
Concerning
-
Driver IGFX stopped responding and the screen is now healed
Hello!
I have a problem with games on my Inspiron 1525. I found subjects with this problem but can't find any idea how to solve this problem.
"Driver Igfx stopped responding and the screen has now recovered" - this error pops up when I play 3D games.
Video: Mobile Intel® 965 Express Chipset Family.
Latest drivers from dell.com are installed: 7.14.10.1409.
Of the intel.com, I downloaded driver v7.14.10.1472 but cannot install it.
How can I solve this problem?
p.s. DirectX 10 installed.
Maybe you are looking for
-
I loaded firefox 8 severaltimes down, but how to activate it?
As I was saying, I downloaded firefox several times, but when I click on the icon of firefox it always opens the old version. How can I get the new version running?
-
How can I activate my Microsoft windows?
How can I activate my Microsoft windows?
-
I have a hp dv7 3105tx double hard drive hard drive has no need to replace someone can tell me what drive is in fact the main drive
-
Integration of BBM: unable to complete the installation (in the Simulator)
Hi, I have a problem, I wanted to integrate BBM to my Apps, but I actually just Simulator test. When I run and I add my blackberry ID I always get to this page: Isn't this possible? I have the newest emulator (10_0_09-2318) and the vmware player 4.0.
-
Hello, I added my work outlook account while traveling, and he applies the restrictive security settings. I now not need work account and removed, but the security settings remain in place, I disconnected and restarted. Please can you let me know how