iMac will switch after integrated

Similar Questions

• Thunderbolt display disconnects after that the iMac will switch to standby

  I have a Mac IMAC (retina 5K, 27 inches, end of 2015) with a monitor second 27 "love at first sight.

  Specifications are:

  Chart: AMD Radeon R9 M390 2048 MB

  Processor: 3.2 GHz Intel Core i5

  Memory: 16 GB 1867 MHz DDR3

  10.11.2 OS version (15 c 50)

  When IMAC goes into sleep mode and wake up the 2nd monitor (thunderbolt) is no longer connected.  It's very frustrating!  Any ideas?

  When this happens, open Applications-> Utilities-> System Information.

  Look under lightning and check if the display is displayed.  Also check

  Cards video/monitors to see if the display is listed there as well.  The first

  Determines if the Thunderbolt connection is established, the second, determines

  If the graphics card is grateful to the screen.

  View the results, and then from there, we can go.

• My iMac will stop automatically after a noise noisy fan for 10 minutes.  How can I solve this problem?

  My IMac will stop automatically after a loud fan noise.  How can I solve this problem?

  Runaway applications can shorten the battery life, affect performance and increase the thermal activity and the fan.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• My iMac will be either reboot or shutdown of the apple desktop icon

  My iMac will be either reboot or shutdown of the apple on the desktop icon. Items saved on the desktop disappear and the menu from the top of the screen disappears, then it is just in this mode for ever more. I then use the switch to stop, which is clearly not the best way to ensure the longtivity of my system.  I use El Capitan 10.11.3 [latest version] I have tried the following but still the same issue.

  1. I ran disk utility, but no hard drive errors appear.
  2. I stop after having disconnected all my other connections (USB components, components lightning etc.), but still no change.

  Before you contact Apple directly, just wondering if anyone else out there he has a similar problem. I had my hard drive 3 TB replaced a few months back, in line with a reminder official apple and this problem started to reign around one month or later.

  See you soon

  Reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  Reset the NVRAM

  How to reset the NVRAM on your Mac - Apple Support

  If it is still not restart or shut down properly

  Try safe mode if your Mac does not end commissioning - Apple Support

  This is not, reinstall OS X from recovery

  How to reinstall OS X on your Mac - Apple Support

  If this is not the case, contact your Apple Store, the FSAA or Apple's Support.

  http://www.Apple.com/support/contact/

• Firefox 3.6.3 will not play integrated youtube videos. It comes up with ' year error occurred please try again later. " It happens all the time

  Firefox 3.6.3 will not play integrated youtube videos. It comes up with ' year error occurred please try again later. " It happens all the time. If you click to go to youtube the clip plays.

  This has happened

  Each time Firefox opened

  Well, here's my answer to my own post.

  After reading some posts here about possible solutions, I tried to delete all the cookies for YouTube (Tools > options > privacy > show cookies > youtube.com). Then tested on a site with integrated video would not play before and on YouTube directly - both worked!

  The poster with the suggestion of cookies also proposed changes to the 'exceptions', but it was not necessary at least for me.

• iMac will not fall asleep

  My iMac will not fall asleep, well put me in mode 'sleep' manually or automatically after 10 minutes of sleep. The screen will be disabled for a few seconds up to a minute and then wake up to the top. I have restored the default settings in the energy saver to try to fix it. The problem occurred yesterday, but I've never had this problem before. I did not any changes to settings or my computer until this problem occurred. Any help would be greatly appreciated. I would like to know if anyone has need for more information!

  Sleep - determine why your Mac Wakes Up from sleep

  Sleep - why your Mac can not sleep or stay in mode 'sleep'

  Up wake up Sleep - don't/don't stay dormant

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• Coming back from screensaver alt tab will switch to Classic view

  Original title: Alt Tab
  Hello. Recently, I had a problem with Alt + Tab. From my screen saver (Star Trek system 47 of the mewho.com-themed) alt tab will switch to Classic view. If I type alt tab soon enough after his return on the desktop (in about one second) I can still use the Aero 2d mode.  I like the 2d Aero preview. I looked for answers on the web, including playing with the registry.  I ran several scans of virus/spyware with execution tdsskiller and Norton NPE. The scans came voids. I can't find an answer.

  Thank you.

  Hello

  Thanks for posting the request in the Microsoft community!
  I understand the issue that you are facing.
  Provide us the information to help you further.

  1. don't you make changes on the computer before the show?
  2. What is the brand and model of the computer?

  Method 1:
  Try to run the aero Troubleshooter and check if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Aero-Troubleshooter

  Method 2:
  You can update the latest display drivers from the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need further assistance, please answer and we will be happy to help you.

• My iMac will not delete mail.

  My iMac will not delete mail. When I try to delete, (move to trash), I get this type of message the message "up to 75% o! surprise sale is here + free delivery"could not be moved to the mailbox"Trash - on My Mac""9346661.emlx"could not copy to 'Messages', because an item with the same name already exists. »

  What is happening and how to fix it?

  Try to delete/empty the trash, try again and then tell me.

• 10.11.3 iMac will not update more far - why?

  10.11.3 iMac will not update more far - why?

  What happens when you try.

  Have you tried to download and install this?

  Download update of OS X El Capitan 10.11.5 Combo

• My IMac will not recognize my LENOVO Tablet

  My iMac will not recognize my LENOVO Tablet

  "Will not recognize" it what, exactly? What you trying to do? Lenovo say when you contacted and reported the problem?

• I use Windows XP and care April 2014 if I always use the it, what will happen after that Microsoft no longer supports it?

  I use Windows XP and care April 2014 if I always use the it, what will happen after that Microsoft no longer supports it?  My computer will become unusable?  It works great and I would keep it if I can.  I use a Dell Inspiron 530 desktop.  Some people have told me that "nothing will happen" and others tell me that my computer will be more vulnerable.  I use ESET NOD 32 and Malwarebytes.  They tell me that they should still continue to work.  I am told that because my computer was purchased in September 2008, he cannot me upgraded to Windows 7.  I'm not a geek and would need assistance "passage" my files from one computer to the other as well.  And then what to do with my old top office.  I'm very worried and I had to face the fact that Microsoft is not going to deliver any security updates patches after April of 2014.

  I can't wait to hear from someone on this problem and more just to go out and invest in Windows 8!  Thank you.

  I can tell you one thing, all or almost of windows xp device drivers will disappear from the computer manufacturers support websites and will reappear on all these shady sites who claim to be download for free but comes with unwanted software. Download the latest device drivers and keep several copies of them and download them to your skydrive or dropbox account fo guard.

  I doubt that will happen. I've seen Windows 2000 drivers still on websites mfg.

• AVG detects viruses, C:\sccfg.sys if I scan and delete, it will appear after each reboot.

  Original title: C:\sccfg.sys

  AVG detects C:\sccfg.sys
  What is a rootkit?
  How can I get rid of it permanently?
  I ask AVG Anti-virus (free) to cope - AVV, then asks me to restart the computer
  After the re - start AVG advises me that the threat has been eliminated.
  AVG analysis finds no problem for the next (approx.) 2-3 weeks
  Then, the threat is detected again.
  I have lived this cycle several times now.
  BUT I want to get rid of the threat for good.

  Internet search suggests this threat comes from a program called "Folder Lock", (which I had installed for several years) but AVG has only been reported as a threat for maybe three months.
  Research on the Internet tells me that the problem cannot be solved by uninstalling "Folder Lock"

  How can I get rid of this threat?

  Hi Leeds,

  It seems that AVG detects C:\sccfg.sys as virus, if you scan and delete, it will appear after each reboot.

  Let's run the virus scan in safe mode with networking:

  Check out this link to start your computer in safe mode with networking:

  A description of the options to boot in Safe Mode Windows XP http://support.microsoft.com/kb/315222

  After starting in safe mode with network, virus using AVG anti-virus scanner.

  With AVG Anti-virus, perform a full scan using the Microsoft Safety Scanner.

  Refer to this link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• T510 4313CTO 3100 M Nvidia cannot switch from integrated and discrete?

  T510 4313CTO Nvidia3100M cannot switch between integrated and discrete?

  I only have the Nvidia card on my T510. I didn't know you could have both. When I ordered, it was one or the other. ???