Need to restrict users on a local area network to play video files from a share

Similar Questions

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to allow access to a local area network behind the cisco vpn client

  Hi, my question is about how to allow access to a local area network behind the cisco vpn client

  With the help of:

  • Cisco 5500 Series Adaptive Security Appliance (ASA) that is running version 8.2 software
  • Cisco VPN Client version 5.0 software

  Cisco VPN client allows to inject a local routes in the routing table Cisco ASA?

  Thank you.

  Hi Vladimir,.

  Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network.

  If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel.

• What happens if I uncheck all the properties of LAN (Local Area Network)?

  What happens if I uncheck all the properties of LAN (Local Area Network)? My machine OS is Windows XP Home Edition / 2002 Version / SP3 and I have a wireless connection. My connection to the LAN is disabled, currently, I don't have the desire to create a network, and I will in the future.

  Hi Bobby Collas,.

  There is no problem, when you turn off all the options in the properties of the local area network (LAN).

  You will not be able to connect to the Internet or use the connection to the Local network.

• Windows Media Player will no longer play videos WVM from my local computer.

  Windows Media Player will no longer play videos WVM from my local computer. It just hangs and the circle keeps going around and around. I "ve waited nine minutes and the video never played WVM. I don't get the error messages.

  Consider this case closed, please.

• Cannot play video files in media center - files are missing or not working not

  original title: can't play video in media center, audio files and pictures are beautiful and play files in media player but media center says the files required to play videos are missing or does not

  I just upgraded my old HP Pavilion desktop for windows 7 home Prem had problems with the old graphics card and just install a new one. seem to still have problems with video performance, but I'm sure I can find compatible drivers. problem is that wmv and avi files playing very well at the start in the drive media will not play in media center. audio and photo files are fine but when I go to the library and try to play a video, it says that the files needed to play videos are missing or does not. have spent hours trying to get answers, but leads nowhere. Please tell us how to solve this problem. thought about trying the installation disk again but afraid to destroy the progress that I've done. cant I just download everything that I need a microsoft site

  I really appreciate that come back you to me then quickley. It seems that I took the lead for good help. I kept exploring and stumbled upon the answer myself. Seems when I downloaded the drivers compatible w7, I have no drivers directx or direct3d right here. Once I had those installed, everything straightened and media center works as it should, all video files play much better and even much less agitated got streaming. Thanks anyway and I will seek for your help once again in the future. I share a DSL with someoneelse so until we get a router, we need to keep swapping cables so am not always online.

• I need to plug my monitor up to my new computer before transferring files from the old computer

  yet to try to find out if I need to have my monitor connected to my new computer before I use the easy transfer cable to transfer my files from my old computer to the new

  Yes, you will need a monitor connected to your computer to use an easy transfer cable. I suggest to use two monitors, one on the old computer and the other on the new.

  Frank

• [ReachIt] The copy files dialog box display when trying to choose a local application to open the video file

  Install ReachIt 2.0.5.2, navigate to the video folder, select a video file and click Open with-> local application, then the display of the dialog 'Copy files', don't know the reason.

  It's like the design, we will copy the file to the folder local reachit before you can share with shareit. Thank you

• question of vSwitch transmission of local area networks VIRTUAL VMWare ESXi, Vsphere 5.0 5.0

  Having little experience VMware, I entrust the task to try to see why one of our VLAN does not work on one of our servers ESXi 5.0. I will try to be as descriptive as possible.

  The issue began just after works well for months, when it started for starting and running config had not been updated for several weeks on the router and switch.

  Our server has 4 0 1 2 3 physical NICS

  0 and 1 are associated together on VLAN1 and are also used for the management network

  Map NETWORK 2 is used for 111 VLAN (network connect our wireless users to so that they cannot interact with VLAN1)

  3 NIC is connected to the VLAN 66 (a network for video and deployment services)

  These 4 physical network adapters is connected to three different vswitches as follows (I'm not the one who created these so don't ask why they are as they are)

  a vmnic0 and vmnic1 vSwitch0

  vSwitch1 has vmnic3

  vSwitch2 has vmnic2

  All these ports are physically connected to a Dell PowerConnect 5548 switch

  vmnic0 to:

  interface gigabitethernet1/0/24

  Description "VM Server 1.

  switchport mode general

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  vmnic1 to:

  interface gigabitethernet1/0/17

  Description "VM Server 2."

  switchport mode general

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  vmnic2 to:

  interface gigabitethernet1/0/6

  Description «VM Server 3»

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  switchport access vlan 111 (tried several different configurations on this port that Trunk including 1 unmarked and 111 the tag as VLAN 1 and 111 come through the router on the same port. Also just a base switchport mode access vlan 111)

  vmnic3 to:

  interface gigabitethernet1/0/43

  Description "VM Server 4.

  switchport access vlan 66

  If I plug a laptop computer into im int 1/0/6 I get an IP address from the DHCP server, and you can get online. When I go into the properties vSwitch2 and go to VMKernel and try to set it to automatically get an IP address, I get a 169.254*. * address. There is no connection if I statically set the address of one knowledge is available yet. I'll add more information later if needed, I have a meeting in which concerns another project. Anyone who can help, thanks in advance. If you need specific information, I will answer as soon as POSSIBLE.

  On the configuration under maps page network vmnic2 has no observed IP address ranges and I do not know how to change the nic to perhaps add the addresses

  I would try to eliminate the physical NETWORK adapter on the host being the issue. Silly question, but is there a link light? Drop a sniffer out there and see if there is no traffic passing if trying a different physical nic does not help.

• Satelite C50 - B cannot connect to wireless local area network

  My brand new straight out of the box Satelite C50 - B cannot connect to my wireless network, when you are running Windows 8.1.

  When you run the wizard for the first time user, it was unable to connect to my network to register. And I have been unable to connect after starting the OS, even if my thread was visible and the signal strength would be strong. I entered the security network key, but the message came back "unable to connect to this network.

  However, when I started on a USB key to run Linux Mint 17.1, it took less than 5 seconds to connect to my wireless network. If the Toshiba hardware work properly, as also my wireless LAN.

  If I plug in a network cable, same Windows connects to my network and Internet.

  However, given that the C50 - B satellite comes with Windows 8.1 both of wireless capabilities, I was hoping someone here might be able to help me get a wireless connection in Windows.

  It's really strange. I have S50 - B and WLAN works properly. I used my laptop connected to several different networks and everything was OK.
  You can try to test with different wireless LANs?
  Have you checked all the WLAN settings?
  Try restarting your router.

  I mean if your laptop can detect WLAN, this means that the hardware is enabled and working properly. There must be a problem with the WLAN settings.

  Also check the advanced power settings, and then set it to maximum power WLAN.

• DHCP for several local area networks VIRTUAL via SG200 - 50 p

  Here's my scenario.  One of my clients is an executive suite.  Each office gets its own internet through a separate router.  It is a big mess of wiring and confusion.  I want to simplify this by using a single router that feeds a single DHCP subnet to a confgured to switch SG200 - 50 p with multiple VIRTUAL LANs. I was able to do this by connecting an ethernet cable from the router to each group VLAN ports.  So VLAN1 has 4 ports, the first is connected to the router.  VLAN2 has 4 ports, the first is connected to the router etc.    Each VLAN is done with success of DHCP, I isolate traffic between the VLANS.  There is no cross = ping between the VLAN, which is what I want.  And each VLAN can access resources within its VIRTUAL LAN and also provides access to the internet.  Bravo HOWEVER, I would like to provide DHCP to all them VLAN on a single switch port, rather you use a router to power for each grouping of VIRTUAL LAN port.  Because my router is limited to 4 ports, I am limited to 4 VLANS.  I need 12.   I guess this is accomplished in trunking all the VLAN of the to a single port.  But I failed to achieve.  Any ideas are much appreciated.

  Hi Andy, it depends on what one of your routers support. The switch supports 802. 1 q. One of your routers must support a trunk or subinterfaces with 802. 1 q capabilities. It is very important for more than just DHCP. Since I use a single wire, all the VLAN except the vlan native will not have access to the internet unless the router can understand tags vlan.

  My advice to you is first to identify the capacity of your routers, know which router you have / want that supports 12 VLAN and 802. 1 q. The configuration should be the easy part.

  -Tom
  Please mark replied messages useful

• I don't see local area network. Win 7, IE 10. How can I do so?

  I do not see local networks with my win 7-64 bit, that is to say 10.  How can I do so?

  Hi David,

  Please answer a few questions to refine the question.

  1. When you say LAN. you earn to the available network connections?

  2. are you using wired or Wi - Fi?

  3. are you able to access the network with other browsers?

  Try to run the network troubleshooter and see if that fixes the problem:

  Check out this link to do the same thing:

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Provide more information so that we can help you.

• Extreme slowness of local area network and Time Capsule wireless speeds

  I have a time Capsule Airport Extreme 3 G with firmware version 7.7.3 I use for lan connections / wireless and backup of all apple devices that do not use the cloud. For the last month or so sometimes I ridiculously slow speed issues that cannot be remedied with any one of them that I have tried. Speed control on my i mac or wireless on any device in any location see accelerates it half of what I pay for. If I shoot a speed control to the back of the modem, everything is ok. If I shoot a speed check in a port on my machine Net Pro FVS318G safe with Airport extreme disconnected speeds are fine. But when the capsule is used the speed is slow. This happens not all the time. In fact this am that everything was fine, she just started about an hour or two there once again. And it normally clears up in a few hours on its own. It is like someone is inside my computer slows down I can't even do a backup on my i-phone when this happens.   I bought the thinking net machine that triple nat could help I'm not using the vpn option. I'm lost and open for suggestions?

  My mac i run El Cap v 10.11.4.

  Att Uverse 18 m 1 m

  Time capsule two years old.

  Check the speed of 1-6 m down issue when happening, 17-18 when well. done before also.

  Can you please describe your network topology?

• Satellite Pro L40 PSL43E: Unable to connect to wireless local area network

  Hello to everyone who reads,

  I've had this laptop for about 12 months and a few days ago while trying to connect to the internet, she advised that I was not connected to my router.

  I have another laptop, it connects well with wireless and it connects fine using the ethernet cable but wireless!
  Especially, when I switch the radio power on/off using the small switch on the front the same symbol rises (the cell phone, red circle with a red slash through it, then the sign of the internet!)

  I tried the update of the driver for the Atheros AR5007EG Wireless Network wireless adapt and not much happened!

  I'm not in portable computers in a big way so any advise given better would become simple?
  I saw some stuff about the removal of the cards and other things? but I don't know where to start!

  Is it a common thing with these laptops?
  Need help please, I desperately need my laptop wireless.

  Thanks a lot to all in advance

  Paul

  Hello Paul

  Make sure that the wireless network adapter is correctly enabled.
  After putting using WLAN switch using FN + F8 key combination and make sure the wireless network adapter is enabled.