Image and text display in Preview Mode (was: Preview Mode)

Similar Questions

• White spaces between and vertical shifting of images (and text) as a preview of the browser

  I built my site in Muse, but when I preview the, there are white spaces of different sizes that appear between images and text. In addition, an entire section of the Web site has moved down through an entire page. Here are a few screenshots as I can manage them. Unfortunately it is not yet hosted, so I can't post a link.

  Just a note: I'm build this page of my site as a portfolio to side scrolling. At the beginning of each "page", I added an anchor point, and I've added a 'back to the start arrow' so that the elements of different menu on the far left of the page (at the beginning) a link to their respective 'page' along the portfolio of horizontal scrolling. Similarly, the "back to the start arrow" menu link.  I don't know if this is part of the question, but it seems that it shouldn't be, because I got that simply making the page extremely broad and not very large.

  Here are a few screenshots.

  Inside, Muse:

  

  Leave the browser preview:

  

  Inside the Muse:

  

  Leave the browser preview:

  (Here are two screenshots only because they were separated by white space so that I could not them on the screen at the same time.)

  

  

  A more. This one shifted downwards, rather than on the side. Note that I did so that the image on the bottom was not attached to a low sticky footer or anything.

  Inside, Muse:

  

  Leave the browser preview:

  

  Thank you!

  Well well, the standard answer (and I should perhaps store them somewhere as a copy & paste NOTE): you must use groups and other methods of structuring as widgets. Your items may not stick together because they have no container parent to hold them together as in reverse, they can overlap with because they have no logic telling them everything that is left, right, above and below. Muse is not a page layout program and you not post a PDF file where everything is nailed in place. dumping everything on the page without which concerns the way in which it will interact in your browser never gives the result you expect.

  Mylenium

• Error display IMAGES and TEXT

  Hi all
  
  I am currently evaluating FLEX technology for future WEB developments company. As part of the evaluation, I'm working on a Web Page demo.
  
  Currently, I'm stuck trying to show the text formatted with pictures. To do this, I use the property mx:htmlText of the mx:TextArea of the class because it allows me to insert directly to the HTML code. I was aware that not all tags have been supported by the mx:htmlText property, but I was worried when I read this quote in the developer's Guide Flex "the < img > tag is not fully supported in Flex 2 and may not work in some cases.". Even this warning, I decided to go head with the tests, I put the < img src = "image1.jpg" > inside the mx:htmlText. Unfortunately my suspects have been confirmed: it did not work, I get this runtime error message twice whenever I load the component with the HTML content "Error #2044: Unhandled IOErrorEvent:.» Text = Error #2036: finished loading never. "I tried to use an absolute path and I had a security error but the image is displayed, but no way parents are allowed.
  
  CODE:
  
  "" < mx:TextArea xmlns:mx = ' http://www.adobe.com/2006/mxml " width ="100% "height ="100% "editable ="false"wordWrap ="true"paddingRight = paddingLeft '0' = '0' backgroundImage="@Embed('recursos/logoINSITMA.jpg') ">"
  
  < mx:htmlText >
  <! [CDATA]
  < p align = "justify" > < size = '13' color = "#0021CC" > < textformat leftmargin = "5" rightmargin = attack "5" = "5" > blah blah blah blah blah blah blah blah blah blah blah blah blah < img src ='\logoinsitgris. GIF' > blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah
  < / textformat > < / police > < / p >
  []] >
  < / mx:htmlText >
  
  
  < / mx:TextArea >
  
  
  As a walkaround, I thought to use mx:Labels and apply styles to format the text and mx:Images to add pictures, but I'm not sure if I could even generate the layout that I have in mind (I would like text surrounds the images).
  
  so my questions are:
  
  1-. Is my < img > syntax invalid or there is something I should have in mind to avoid the error "Error #2044: Unhandled IOErrorEvent:.» "Text = Error #2036: never finished loading? Or is happening this error due this HTML tag is not supported by FLEX?
  
  2-. Is there a walkaround to generate images and text formatted? With the help of mx:Labels and mx:Images can be, but they are much more restricted than HTML and also it is not very maintainable.
  
  All your comments/ideas/suggestions are welcome.
  
  Thanks in advance for you invaluable help.
  
  J.B.

  Solved. Set the security zone sand as sand of file system box.

• Display a different image and text on the Quiz result based on percent reached

  Captivate v5.5

  I have a quiz with a pass mark of 80%.

  I want the text and the background image is based on the success or failure.

  If the score is less than 80%, displays a picture (sad face) and a relevant text 'failed ".

  If the score is 80% or more, show another picture (happy face) and a relevant text "passed."

  I help Lilybiri and the stem when I used Captivate v4 - but cannt find the details.

  (Liybiri/Rod...) someone can help me once again and explain the process.

  Thank you

  Noel

  Hi Noel,

  I don't know if you read that my blog post on the features of Question slides and slide to score? And somewhere I have a topic customization review messages (also on the slide of score) as well.

  If you want to only two situations: success or failure, it will be pretty easy. The pass/fail is stored in the cpQuizInfoPassFail of system variables. This system variable has its final value when you go to the slide to Score, so you can use it in a conditional action advanced at the entrance to this slide to Score. The idea is that you have both images and text captions ready and hidden and you show one of these, based on the conditional action. And you must get rid of the message default review on the slide to score, but without deleting the placeholder review if you want to allow the review.

  Is that what you want?

  Lilybiri

• Thumbnail images, more large images and text PROBLEM

  Unclear title, with a problem difficult.

  What I am wanting to do is, when I click on a thumbnail image, I want to have the content of the DIV to display the image and the thumbnail information you just clicked the right to change accordingly. I use Dreamweaver CS5 on MAC:

  -J' have a page divided into 2 vertical columns. On the left, I have 6 thumbnails in their individual DIVs, all wrapped together in another DIV container

  -on the right side of the page, I assigned a large DIV to display a large image with a description below what the project was etc...

  I know that you can attach a behavior to the thumbnail to change the big picture on the right, but I have a short paragraph of the text below the big picture too, and I don't particularly want to make the image and text a huge image. I want to keep the text, text.

  How can I do? Is it a simple thing? or y at - there a lot of coding to do this with JQuery, Javascript or something? Is there something to do with the data record sets involved?

  Is it possible to do that when you click on the thumbnail it can charge the relevant image and text in the div on the right?

  Sorry if it did not clearly explain, do not know how do it, so don't know if I'm describing correctly.

  As always, all the help and advice very welcome.

  In the right column, you would-

  Legend legend legend

  Legend legend legend

  ...

  The CSS would be-

  {of signs

  display: none;

  / * Add other styles as needed for the caption * /.

  }

  The thumbnails would each of the following behaviors:

  * onclick set the desired right column div to "display: block" using behavior ChangeProperty of DW.

  * also onclick set all the other div of the right column on ' display: no "DW ChangeProperty behavior.

  Be aware that how to apply this behavior for inches is one) first to wrap every inch in an anchor null () and then apply the behavior to the anchoring of the packaging not to the image.  Alternatively, you can apply the behavior to the image and then using the behaviors panel, change the behavior of "onClick" event to " onClick.

• Images and text blocks will not stay on-site in a target of composition

  I'm having a problem with the placement of the images and text on a target of composition. What is maddening, it's that I did several times before and it's worked very well. Now, when I place the image, it is still there - even when the user clicks on a new trigger or when the composition is entirely closed. I can provide a link to the site, do not know if this is allowed here. I'm just trying to add a trigger/target more to one of the compositions. All the settings on the images, triggers and targets are the same as they have been for all the previous ones, that I have added in the past. Any help would be appreciated, as the company that I'm running the site is naturally impatient

  Did you try to 'cut' the image, and then select the right target in the nested composition (in the upper left corner of your application window displays the label "target: Normal ') and 'Paste' the image 'in place'?

  (And: are you using the latest version of Muse?) It is a version, which refuses to add several triggers to a composition in designs complex page.)

• positioning images and text

  I've noticed in muse when you change the size or the leader etc. of a text box, it automatically increases its size to fit the new size of the text (unlike in indesign, photoshop and illustrator)

  
  

  It's cool and not only that sometimes repeat sometimes muse grows automatically any block image or text to the bottom of the page to make space for what it

  
  

  still very cool

  
  

  but then, as does an indesigner, you start dragging images and text on the page around areas and they look very good in design muse, but the preview and the browser sometimes puts higher upwards or downwards more down the page you wanted or expected

  
  

  as I muse and I can not look under the hood and don't want to anyway and cannot change any code (thank God) what should I do?

  
  

  Muse is not all guess it is

  
  

  PS once when I selected the text boxes and tried to move them they stole off the screen in a wild part of the pasteboard and I had to go after them and wrangle that they return to the page
  

  Short and precise: No... You're confusing Muse for a web version of InDesign, which is not. What you describe is normal behavior because the real positioning of elements on a web page is calculated according to the rules of formatting and how they interact with each other. Some of this stuff is figured correctly at design time, other stuff not because we need to run the scripts or formatting rules to be evaluated first. This has always been the bane of any web - design overview is that a preview is a preview, nothing more. You simply don't know how pages can knock out on light in the wrong browser. In your case, looks like just the typical mistake of beginners to plopping at the root of the page without making good use of layers and groups to determine priorities. This and of course you can apply the padding, wide margins and so on or in the opposite direction does not reset rules rather generous padding and margin a few widgets. So in the end, as much as you can not, you down serious things and work up to at least a basic understanding of how the work of formatting of Muse and how it translates a web page once published. Web design isn't just about 100% WYSIWYG.

  Mylenium

• slideshow of the entire width of the images and text with switch small points

  Hi!, I'm going crazy trying to do something I think should be really easy and simple:

  a full-width or full-screen composition or a slideshow of images and text with little switch points instead of thumbnails.

  I guess everyone nows what I'm talking about... because all of a sudden he's everywhere!

  
  Something like this QooQee model: http://www.qooqee.com/templates/sense/sense-qooqee-slideshow.html

  I tried the compositions, but they cannot be expanded full-width...

  then I tried to slide shows, but they do not have triggers... they have thumbnails...
  I tried to fill points picture slideshow thumbnails too (I know that is not the best way to do this, but...). He did not, the filling will not appear unless I low opacity... Why is this?

  I also noticed that the example of sense QooQee is something complicated... text is displayed as 'on-off', but images do their entry by a transition melted... are you looking for they combining 2 widgets for this?

  Any help is appreciated! : )

  Hello

  What you're trying to achieve is possible in the Muse by using the Fullscreen Slideshow option.

  I created a video showing how it can be done. Please download it using this link:- http://adobe.ly/1mp5X84

  Please let me know if this worked for you.

  Kind regards

  Rohit Nair

• How to add images and text from a txt file in Adobe Muse?

  How to add images and text from a txt file in muse

  Hello Tony,.

  At you can easily found in your text, copy and then paste in the new text box within the Muse, following a normal copy and paste.

  but images can be copied and pasted, so you need to save the images first as normal JPEG or PNG formats, and then you can import them into your file of muse.

  Best regards

  _Ankush

• text-align: center in div with images and text

  If I put a div with text-align: center, and includes annother div with text as an image inside, will be the text and the image centered on the page in all browsers?

  , It works very well on fire fox but so do a lot of things! Ive tested the net IE rendering (http://ipinfo.info/netrenderer/index.php) and it seems to work fine. IM worried however as Ive read the tutorials that use means much more complex centering images and text so im wonding if it has some problems.

  Thank you

  It works fine in all browsers.

• How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

  How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

  Hello

  Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

  If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Images are not displayed in design mode

  I downloaded and installed lightroom CC 2015 for Windows trial version. When in library mode, I can see previews of all files and file types. When I click on develop I get the Preview on the left side, but the main editing window does not display the image, just a blue rectangle with an 'X' through it. If I hit the after option and then the front image appears and the image after is the same blue box with a "X". "» The changes are reflected in the Preview on the left panel image, but not on the "before" image I did not active proofing. I tried JPEG, RW2, DNG images and nothing to see. I upgraded my video card without change driver.

  Is there a setting I'm missing somewhere or is it how the trial of version functions?

  

  

  

  Reach:

  Edit > preferences > Performance

  Lightroom > preferences > Performance (on Mac OSX)

  Disable the GPU acceleration.

  For Windows, you should go to the website of the manufacturer of your graphics processor and check the driver updates. Once updated you can try turning on GPU acceleration, otherwise leave this option disabled.

  Mac GPU, updates occur with updates to the OS.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• integrate image and text in the report

  I'm doing a label with a logo at the top left, a chart on the side right (an arrow indicating the direction of flow)

  and the text in the body of the tag, so far without success. I tried to use the generation of report vi s to achieve this, but it seems that just the 'standard' reporting rather than on a word one (no Office product on the computer, has no... Works, yech!) limited considerably, although I do not know how the do with the ability of Word template, although I suspect that would make life much easier. I really don't understand what can do the "standard" report When I set the alignment of the Image to add to the report, there is no effect on the placement of my graphics. In addition, it is an addition, which means that I find myself with the image on a label, the text on the other. I want to do is have them both on the same label, the Logo above and the arrow to the right of the text.

  I tried a lot of things, including using the generation of reports "Append façade image" and make a cluster that has been written to fill all of the panel before visible, but it was printed distorted and small, similarly Append control image.

  The printer is a usb Zebra TLP3842

  LV_Pro,

  As FAS so I understand it, the alignment entries apply only to HTML format, so they do not affect the Standard reports.

  Try to put your logo in the header of the standard report.  Then on your front, create a tab control, where you place your text box and graph of arrow in the direction you want to print on the page.  Make the background of the transparent tab control and add the image of the tab control to the report.  I think that it will be justified to the left little matter what you prefer, so play with the size and spacing of everything until it comes out looking how you want.

• How to create a listfield with image and text?

  How can I add images in a list. In addition, I also want to display with the image, a text. How to do?

  Help, please...

  in a listfield you use drawListRow to paint each line.
  You can use drawBitmap to paint a picture and drawText to paint the text.
  There are a few samples on the basis of knowledge, take a peek.

• Dynamic tab Shell cut Images and text

  I use the Shell dynamic tab on a page and try to get a few images-links and output text display correctly in the global toolbar.  I want the links to the image on the left side of the toolbar and the output on the right side text.  The problem is the pictures are cut off and the text is envelope in a small space and is not entirely legible.  The images are 32 x 32 pixels.  Should I resize them to something smaller?  I tried to use small images previously, but it seems simply push down and still cut.

  The full text of output must be "logged in as: username", but it is force into a small space and cutting the username like this:

  Connected

  as:

  username (this line is not visible in the toolbar)

  Here is my code.  Any help is appreciated.

  ...

  "< af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx "value =" #{bindings.ptb1} ' "

  ID = "pt1" >

  ...

  < f: facet name = "globalToolbar" >

  < af:panelGroupLayout id = "pgl5" layout = "horizontal" valign = "top" >

  < af:toolbar flex = '1' stretchId = 'stretch1"id ="tb1">

  < af:group id = "grp1" >

  "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.dashboardSelected} "id ="cil1"icon="/images/AsIconDashboard.png "partialSubmit ="true"/ >

  "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.toggleSelected} "id ="cil2"icon="/images/AsIconToggle.png "partialSubmit ="true"/ >

  < / af:group >

  < af:spacer id = "stretch1" width = "10" height = "35" clientComponent = "true" / >

  < af:outputText id = value = "#{tabmanagement.loggedInAsText}" / "loggedInAsOT" >

  < / af:toolbar >

  < / af:panelGroupLayout >

  < / f: facet >

  ...

  Move text output of the globalToolbar facet in the facet globalSearch fixed problems and gave me the results:

  ...

  Icon="/images/AsIconDashboard.png" partialSubmit = "true" / >

  Icon="/images/AsIconToggle.png" partialSubmit = "true" / >

  ...

  ...