Image bitmap binary questions

Similar Questions

• Images bitmap will be not smooth.

  Hello again,

  I'm loading external images and try to get them to smooth out, but for some reason, this isn't the case. I've tried everything I can find on the internet in the last 10 hours or and nothing has worked.

  The code on my movieclip (first image) is:

  var Ldr:Loader = new Loader();

  var UrlR:URLRequest = new URLRequest("myImage.jpg");

  LDR.x = 340

  LDR.y = 0

  addChild (Ldr);

  LDR. Load (UrlR);

  everything works fine to get the image on the stage.

  I have tried many variations of the following (immediately after the code above):

  var myBitmap = new Bitmap (image Bitmap (Ldr.content) .bitmapData, "auto", true);

  OR Bitmap (Ldr.content) .smoothing = true;

  ETC.

  I also tried:

  internship. Quality = StageQuality.BEST;

  on my first frame of the main timeline, but my images were still in staircase

  My pictures are of very high resolution, so I know this isn't a resolution problem. Anyway, they look crappy when they size down too. also, I'm sure that smoothing is the question, because I have a very similar image in the library (details at the same time and a similar resolution, etc.), and it is great when I allow smoothing in the bitmap properties panel.

  Anyone know what is missing in my code?

  Thank you!

  Robin

  AFTER loading is completed, apply your image bitmap and smoothing.

• Convert JPEG image into binary data

  Is it possible to convert a JPEG image into binary data. Because if it would be possible
  You can insert data into a database.
  
  Kind regards
  
  Micehal.

  Yes. check the bitmapdata class.

• Write a bmp to binary questions

  Hello

  I have a string of text BMP I got an oscilloscope of Yokogawa. I can write this file directly to a. BMP, but binary writing adds 4 bytes at the beginning of the BMP string that actually a BMP format invalid. Remove the 4 bytes with a text editor, save, and reopen the case it will be valid which can be opened by any image viewer.

  I also tried the regular script text file function, but it's the jarbled of the image, however, does not add the 4 extra bytes as a binary writing.

  And I tried the recommendation of this post, but the BMP file is also jarbled.

  http://forums.NI.com/T5/LabVIEW/problems-creating-a-BMP-file/m-p/757714/highlight/true#M347071

  Here's my VI:

  

  Writing the file binary write, extra 4 bytes...

  

  I see here the 4 bytes in the data string.

  

  What happens if you wire a FAKE on the array or string of size "prepend" when writing the binary file? (the default is TRUE).

  (If you use 'write in the text file' be sure "convert EOL" is disabled (it is enabled by default).)

• Export the graph to image: a few questions

  A few questions.

  (1) what does export average image "simplified"?

  (2) the invoke node export the Image export the image or simplified?

  (3) export the image to a .eps file, what I get is a picture of real vector graphic?

  Thank you

  (1) simplified - essentially data plots in graphical format, - without control shadows, white background, solid black grid lines. Try to copy it to the Clipboard, paste into paint, you'll see.

  (2) export Image - simplified (only for graphics). Get the picture - picture of the graph (any control)

  (3) generally labview does not know the vector graphic images, and maybe that this exception, since it is simplified to the rowset.

• Windows 7 Outlook image domain profile question

  We have a PC Windows 7 64 - bit, Ghost image of the PC, but when the first user opens a session, outlook goes into their profile, when the user opens a next session in it goes to the first users profile that connects.  There is no prompt that appears just directly in the Outlook of the original user profile, if this can be solved?

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Office/en-us/home?Forum=Outlook

  Hope this information helps.

  Thank you.

  Sincerely,

  Ankit Rajput

• BitmapField does not display an image bitmap. In fact, it does not display anything at all...

  My problem is simple and fast. I am probably just a stupid mistake, but the BitmapField component does nothing and does not display the bitmap image. I first tried to display a Bitmap using its setBitmap (bitmap Bitmap) method, which did not work. Then I tried to use it's method setBitmap to the Builder, who did nothing at all no more. Then I tried to use setImage using an image encoded if nothing happened again. Yes, both the encoded image and methods of Bitmap.fromBitmap that make new Bitmap objects and EncodedImage POINTENT to real images in my project folder. So what I am doing wrong, I forget to call a method in needed or what? I use Eclipse with the plugin and I use the Blackberry 9550 Simulator.

  First of all, your use setSpace is incorrect. What you are doing here are to define a space around the bitmap image - in this case, the space is bigger than most of the screens, which will ensure that your bitmap image is not actually on the screen. See the description of the API in the javadocs.

  Second, you SHOULD check the return of getBitmapResource(). If it returns NULL, then the resource was not available. What you're doing here can hide a problem.

• Zoom on the image Bitmap field

  Good morning to all"

  I want to zoom in on BitmapField. Is it possible to BB?

  TNX your tips.

  What do you mean by 'zoom in '?  If you want to enlarge a bitmap image, you can use EncodedImage.scaleImage32 (as long as you are able to get your image as an EncodedImage data).  Here's an example of utility code I had to scale an image based on its width or height.  Using this as a basis, it should be simple enough to adapt it to your specific needs.  If not, let me know; I have a lot of image processing code.

   public static EncodedImage scaleImageToWidth(EncodedImage encoded, int newWidth) {
          return scaleToFactor(encoded, encoded.getWidth(), newWidth);
      }
  
      public static EncodedImage scaleImageToHeight(EncodedImage encoded, int newHeight) {
          return scaleToFactor(encoded, encoded.getHeight(), newHeight);
      }
  
      public static EncodedImage scaleToFactor(EncodedImage encoded, int curSize, int newSize) {
          int numerator = Fixed32.toFP(curSize);
          int denominator = Fixed32.toFP(newSize);
          int scale = Fixed32.div(numerator, denominator);
  
          return encoded.scaleImage32(scale, scale);
      }
  

• move the image bitmap overlay 2 at a time

  I have 2 bitmaps overlapping (one is a card and the other an indicative icon) is a card offline, the question is when I move around the map and move along the map and the icon, it gives me error, the two movement with this code:

  navigationMovement protected boolean (int dx, int dy, int, int time status) {}
  left + = (dx * HORZ_SCROLL_FACTOR);
  Top + = (dy * VERT_SCROLL_FACTOR);

  If (on the left<0) left="">
  If (upper-<0) top="">
  If (left > maxLeft) left = maxLeft;
  If (top > maxTop) top = maxTop;

  invalidate ();

  Returns true;

  Thank you

  This error means usually only one of the arguments you provided was an invalid value.

  The best thing to do is to set a breakpoint and check the values provided to this function.

  My guess is that either top > left or bitmap (xBitmap) .getHeight > .getWidth bitmap (xBitmap).

  E.

• Image bitmap scaleInto

  Hi all

  I have a code that uses this function:

  Bitmap image. scaleInto (int srcLeft, int srcTop, int srcWidth, int srcHeight, Bitmap dst, int dstLeft, int dstTop, int dstWidth, int dstHeight, int filterType)

  It works quite well on the simulator of the torch, but when I run it on one of the simulators OS5 seems not to do the resizing & copy.

  The code is identical on the two simulators, works great on 6 but not on 5.

  Ideas:

  Thank you

  You will not believe, but this just function doesn't seem to work on OS5.  I wrote my own version of the function and now it works fine.

  For all job-here it is:

• Add background images 100% width questions

  Hello again,

  This is another issue that I'm trying to overcome.

  I added these subtle geometry type forms in the background of the Web site to fill the blank gradient area in the case of a person like me consults the Web site on screen 27 inches.

  

  Now on screen 27 inch, everything seems perfect and the way I want it, but here is the strange part, when I adjust the side window beside it contracts and expands as it should.

  

  but when I use the bottom bar to move from left to right, look at what is happening.

  

  Now, is not so much a big problem on screen 27 inches because if I develop the window full screen it will look like perfectly on both sides of the web page.

  but this is the result when you open this page even on lets say 13-inch macbook, the left side is perfect, but the right side?

  
  

  

  
  

  
  

  The same phenomenon occurs with the Ipad. I understand that the question is the image in the background, but how is the image of the left hand has no problem, but the right hand image is. It should reveal only the background image gradually if your screen is wider than 960px (width I put for my site) not the whole background in a go image. Once I have remove the background graphics, I don't have these problems, and it seems fine on my macbook 13 inch or an iPad. But I don't want these images,
  

  

  

  Sorry for so many images, but I wanted to make sure that everyone understands what is my problem and can help with this problem.

  Thank you very much

  In the case of the use that you use do not add your background for the page itself. Add as a fill for browser - not an element of the width of 100%.

  

• 360 image sequence: smooth question

  Hello to everyone

  I already have sequences of images 360 for a customer, it was like 65 for each element, so it's been quite fluid and smooth.

  A new customer gives SMEs 24 images per sequence.
  The problem isn't that "good, is not as smooth as the 65 one", the real problem is that he doesn't seem to understand the action > > > is correct on the PC Viewer, but on the ipad, I try like 10 times with my finger for the entry of the action (and the action is HARSH)
  IMPORTANT NOTE: when I saw on the PC, it is well with mouse works and actions for the good...

  
  Is this due to the fact that it has 'only' 24 images?

  For a smooth 360 ° rotation, use at least 30 images.

  Here

  I know that you are not questioning the sweetness, but it's probably a good thing to start with this first and see what happens...

  Post edited by: Christophe_Jossic

• I'm not allowed to post image with my question.  Why?

  I'm trying to post a question on the use sumifs instead of PivotTables in number, but if I paste a picture of the worksheet I get this message when I try to post my question: you are not allowed to create or update this content

  I am writing a new question.  Why am I in finger out and prevented from asking my question?

  Have you tried more than once.   I met a similar situation this morning who disappeared when I repeated the position.

• Image bitmap setARGB

  If I use setARGB on an object Bitmap must match those of the Bitmap was created with the dimensions of the matrix? I have an app where I need to rotate a picture not square. I wrote a function to do that myself, but it fails when you try to call setARGB with the new table.

  You can create a new Bitmap object with the desired size

• Projection of images and the question of the color space

  We are having a discussion in our photo club. We use a projector to project the images of the competition. For years, we used Faststone Viewer to project images. We have the usual problems of people not calibrate their monitors and sometimes the colors match does not, but it worked pretty well.  Now that the people who handle the projection are competent in LR, they use LR on a Windows laptop, to organize and display the images via the projector. The projector is a projector of sRGB VGA.  Some argue that LR will cause problems because it uses the Adobe RGB color space as the space of display colors. (We know that the native color space is ProPhoto). Others think it will display images in space sRGB color to the projector as you can when you export an image. I can't find anything in Adobe help pages on this subject.

  Here is a contribution to the debate to give you an idea of what some people are talking about:

  I understand that LR will send bits of images (in the Adobe RGB color space) to the Windows API and in turn the bits are returned on the LCD screen and exit VGA via LCD/VGA color profiles associated. That is my understanding of the viewer FastStone sends the image bits being without modification in the color space. LR sends the bits altered the Adobe RGB color space. Assuming that both programs require the same Windows API, the images must return the same, but they do not. My conclusion is that the former is in sRGB and the latter in Adobe RGB. I guess they call the same APIs because you can open a jpeg file in Windows Picture Viewer (applet in Win7) and see a different rendering of FastStone, it does not use the color managed API.

  Anyone who can shed some light on this delicate subject?

  You actually want an app like Lightroom or Bridge to view images on your projector and not the unmanaged faststone Viewer or something like. Lightroom translated correctly the image on the destination for the projector profile regardless of the original color of images space. It is best to calibrate them and profile projector in addition to your monitor. Some of the highest fine adjustment washers support projectors too. It is rare that these projectors really are sRGB. They are usually somewhat narrower. Some of the more recent are wider gamut when using LEDs or lasers instead of bulbs.