HP ENVY 15 Notebook PC: Can I place a mobile GPU on my laptop?

Similar Questions

• HP Envy 15 Notebook PC: Can I download Driver

  I have a laptop HP Envy 15, with an I7-4510U processor and a Nvidia GeForce 850 M with 4 GB memory and 1920 by 1080 touchscreen.  I see that Intel has released a new 64-bit driver https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y & DwnldID = 24596 , which is supposed to be the HD graphics.

  Please let me know if I would be better off installing this driver.  The HP Wizard found no updates.

  Quad TouchSmart HP ENVY 15t

  Hello

  Normally, you should leave it on HP Support Assistant's hand because the driver has been tested and HP releases. You can download and install yourself, but

  (a) driver may not install at all, and you receive a message saying that you can not install it.

  (b) pilot can brick your machine or will not improve anything.

  Kind regards.

• HP ENVY 17 Notebook PC: Can't activate Windows 8 Pro after a factory reset (hard drive reformatted).

  Hello:

  I had to make a drastic clean the C drive of my ENVY 17 laptop and did a Factory Reset. I was able to reload Windows 8 Pro to my USB stick recovery.

  However, Windows 8 Pro cannot be reactivated indicating that the product key is invalid or blocked. I understand that this is due to having the OS completely cleaned and formatted drive.

  My questions are:

  1. Will be the HP (which is available on order) recovery disks be able to help solve the situation described above?
  2. It will allow me to reactivate my Windows 8 Pro?
  3. Will the recovery be HP discs/media contain or are marked with the correct Windows product key?

  Thank you

  Rico.

  Solved! HP technical support took care of me Thank you so much.

• ENVY of HP dv7 Notebook PC: HP ENVY dv7 Notebook PC can pass between the Intel and Nvidia graphics processors

  I have a request when it runs I get an error as follows:

  "Display driver stopped responding and has recovered display Intel graphics driver Excelerator for Windows 7 (R) driver stopped responding and has successfully recovered."

  Is it possible to assign this application for Nvidia graphic card instead of 4000 GPU Intel. If yes how to do this assignment.

  Thank you

  Here's what I had to do to get the graphics Performance at a level that would allow the Surfcam CAM application traditional 2015 work correctly:

  Envy of HP dv7 - 7373ca required parameters for 2015 Surfcam traditional

  Right-click on it to office;

  Select the Nvidia Control Panel

  1. Setting the parameters of the Image: use the settings of the 3D Image.
  2. Manage 3D settings: NVIDIA High Performance processor
  3. Physx Config set: GeForce 650 M Graphics

  Select the graphic properties (it comes to GPU Intel HD 4000)

  1. Media: Preferred 3D Performance
  2. Power: Max Performance

• PC portable HP Envy 14, J5V14A: How can I disable the Symantics TouchPad on my laptop of HP Envy 14 t?

  I tried to change the sensitivity of the touchpad on my laptop, but it is still so delicate, that it drives me crazy. The other questions, I looked here in the forum of the community is not party to the machine or the utilities that I have.

  I want to COMPLETELY DISABLE it and use a plug in mouse.  Where is the option to disable the touchpad?

  I uninstalled the driver for the TouchPad Symantic, but the touchpad still presents itself as a device of '' PS/2 Compatible Mouse. '' When I open the Properties dialog box of the mouse, on the driver tab, the button disable is grayed.

  How can I COMPELTELY DISABLE the touchpad and just use a plug in mouse on laptop HP Envy 14 t?

  @kiltinshire,

  Thanks for posting back.  As you know that there are several versions of HP laptops may be, most of the control functions are found in the user guide.  If you don't find it there then you would go to the deactivation of material in windows.  It is a microsoft.

  Normally, you have 2 choices to turn off physically.  First the touchpad has a little button at an angle according to the model.  Use a function key, it will have a diagram of a square and a finger.  These methods have been used for years to turn your touchpad.

  Then is just google how to disable touchpad in windows 8.  Here are some links that you may find useful that I found using this search.

  Touchpad and keyboard

  How to activate and deactivate Touchpad on HP ENVY

  Turn off the notebook computer Touchpad under Windows 8 / 7

  How to disable the laptop touchpad in windows 8

  Now if you try to find a way to permanently close off the touchpad so that it does not in fact once again you will have to dig into Windows Help for this.  If Windows detects hardware at startup, it will, by default, try and load the driver of basis for it and most likely turn it on when you restart.

  The only other way is to open your laptop and unplug the cable that goes from the touchpad to the motherboard, so this does not happen.

  I hope this helps.

  Thanks again for posting and have a great day.

• HP Envy model m6-w103dx: can I install a graphics card in my laptop HP Envy?

  I have a bang & Olufsen hp envy laptop with a core i5 hd graphics card and I want to know I can install an inside nvidia graphics card? If so, how do I disassemble my laptop?

  Hello

  No, no, colocation allows you to add a video card. It uses Intel HD Graphics 520 with up to 4172 MB total graphics memory that came with the CPU:

  http://support.HP.com/us-en/document/c04791387

  and replace the CPU is not as simple as that.

  Kind regards.

• HP ENVY 17 Quad t connect a Desktop GPU on my laptop

  I have a HP ENVY 17 Quad-j000 with Windows 8.1 t

  Can I connect a Desktop GPU on my laptop to get best performance all in game?

  Hello

  You bought a bad machine, you should buy a desktop computer, no cell phone. Anyway, I don't think I'll try this. If you wish, you can go ahead and ask them to get the full refund if it does not work.

  Good luck.

• HP Envy 17 Notebook PC TS: Can't update the video driver

  HP Envy 17 Notebook PC TS

  F9M13UA #ABA

  64 bit

  I upgraded to win 10. Now when I try to open CC Adobe Illustrator I get this message: "one or more cards software drivers are not updated. To use the GPU Performance, upgrade the software drivers to the latest version and then restart illustrator".

  I ran the program from the HP driver from the HP site search and I get this: "HP has encountered an error when trying to analyze your product. " Please verify that your product is turned on and connected, and then try again in a few minutes. Or display all drivers available for your product below. »

  I found a driver in the list below this message

  High definition (HD) of Intel Graphics Driver 10.18.15.4248 place 169.2 MB 25 January 2016

  I tried to install it and got a different error message saying "the pilot is not validated for this computer. You can get the correct driver from the manufacturer of the computer. »

  I'm not a computer genius. All I want is for Illustrator work. How can I get the driver I need?

  archivedmemorie

  Based on your response, I did a new search for the drivers of your PC, based this time on the product number that you provided, instead of the template information in your thread title and found very different results!

  Here is the link for the drivers and software page: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-TouchSmart-17-j100-Notebook-PC-series/5425742/model/7415743

  The Intel driver you mentioned matches on the page - so I have no idea why you get this error message.

  Have you tried to download and install the Nvidia driver?

  Given that your PC is so recent, I suggest you contact the HP customer directly and have them put you in contact HP Technical Support.  If all goes well, they can solve the driver problem, you meet with.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Good luck

• HP Envy 15 Notebook PC-E1P05A: can I connect a second monitor (to view different open documents) to my laptop HP Envy 15

  I need to work with 2 screens displaying various documents, I can do this using my HP Envy 15 Notebook PC model E1P05A.  If so what equipment do need me?

  Hello

  You're welcome! Regarding your last question if you can connect to monitor a third? I'm not sure, offshore, but you could always try. Please let us know if we can be useful.

• HP Envy 15 Notebook PC TS: Problem sound Intermittent HP Envy 15 TS / Windows 8.1

  Specifications of the computer:

  HP Envy 15 Notebook PC TS

  Product # E1P05AV

  8.1 Windows 64-bit

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  2 x 8 GB of RAM

  Map of KBC Version 93.52 system 1963

  Graphics device 1: NVIDIA GeForce GT M 740 V.10.18.13.5435

  Graphics device 2: Intel Graphics HD 4600 V.10.18.10.3304

  Audio: IDT High Def Audio CODEC / pilot: stwrt64.sys V.6.10.6491.0

  Question: In the past months, my sound will go off randomly automatically.  If I close the lid and let the computer in to sleep mode or if I restart the computer, the sound comes back.  When the sound disappeared, the volume buttons on the keyboard, so to work with a lag and the mute on the keyboard does not work.  Try to use the sound test, or even navigate the tabs in the Properties section of speaker to accuse also considerably by the sound does not work.

  I noticed other things: I was watching a youtube video when the sound came out, I left the chrome tab that I used for the video and the sound comes back a few seconds later.  He then disappeared a few seconds after I opened a new tab and returned to watch the video.  I had also the same thing happens with the help of a video editing software - quit the application, sound came back, returned to the software, sound went out after a few seconds.  I also had both sound back after going to the speaker properties - Advanced tab and switch format, by selecting the test button and clicking on OK when a message saying "the sound system is in use, taking the test can cause the application to fail" (or something similar).

  I tried to use various utilities for troubleshooting when the problem occurs - the find and troubleshooting audio fix is no problem AND the device is listed as working properly in Device Manager.  I've uninstalled and reinstalled the latest drivers for the IDT HD Audio CODEC several times - no help.  In addition, the problem has been resolved not when I converted briefly to Windows (back to windows 8.1) 10.  In addition, I tried to use the other pilot of "High definition Audio Device" in place and place of the IDT CODEC, but the same problem happened - sound turns off randomly until I rebooted or put my computer to sleep.

  I'm pretty computer - savy but I can't seem to understand what the problem is.  It doesn't seem to be a hardware problem or the sound would probably not come back so quickly or clearly as it does...

  One last piece of information: I noticed that the first time that I reinstalled the Windows audio 24/06/2015 - and also several updates were installed on the 23 & 24 June - watching these updates to see if they are the cause of the problem.

  My father had a speaker bluetooth for Christmas - I tried it out on my computer because it works completely independently of my sound card and it was working fine.

  I bought one of my own for $30 at target - Jam Classic Wireless Speaker - and now I have wonderful sound.

  Does not resolve the issue of the root, but the problem is solved!

  I'm just upset that HP gave me the such a card its crappy that it only lasted 1 1/2 years before give me questions, just long enough to ensure that the warranty expires...

• HP Envy 17 Notebook PC TS left hinge problem

  Left hinge on my HP Envy TS 17 Notebook PC pushes the lower lid of my laptop open whenever I open and close my laptop. My desire is quite recent and it is still under the one year warranty.

  Hello

  Yes.  MY problem is solved.  Company and I got the replacement unit successfully.

  Note: If you have a lot of software installed, especially of VMs on your current laptop, so my personal advice would be to get the repaired unit, I came across the problem to reactivate the license think little software, I do several facilities and refuse activation.   However after talking to the licensing issue has been resolved, but it consumes a lot of time.

  However, if the activation of the license is not a problem for you then unit replacement is better.

  Concerning

  PS. but in the new laptop also, I always get a little tic noice when I open and close the laptop from the left hinge.   That is why I it opens very slowly.  I have just pray and hope that it does not break.  because I get 2nd replacement.

  --------------------------------------------------------------------------------------------------------------------

  Hi JigneshDesai,

  mjhuang (honor student) released a new response Notebook Hardware on 27/09/2014 23:47

  Subject: Re: HP Envy 17 Notebook PC TS left hinge problem

  This answer solve your message or question?

  If so, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.

  We appreciate your comments. It's what keeps our community a useful and dynamic place for our members.

  Thank you for being a Member!

  Forum HP's Support team

• HP ENVY 17 Notebook PC: Unlock BIOS

  Because im going to install ubuntu alongside windows 15.04, I need to disable secure boot. I go and I find that I can not change a lot. I did a little research and discovered that you have to "unlock" your BIOS. How can I do this?

  OS: 8.1 64-bit Windows

  PC: HP ENVY 17 Notebook PC

  BIOS: Insyde F.65, 2014-11-20

  RAM: 8 GB

  Processor: Intel Core i7-4700MQ @ 2.40 GHZ

  BIOS mode: UEFI

  SMBIOS version: 2.7

  NVM, I solved it don't answer.

• HP Envy 17 Notebook 3002ea - need to add more MEMORY...

  Hello

  I have a HP Envy 17 laptop 3002ea (number of product A2Q36EA #ABU) with the following characteristics:

  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  Processor Intel Core i7-2670QM 2.20 GHz, 2201 Mhz, 4 Lossnay, 8 logical processors
  Hewlett-Packard Version / Date BIOS F.08, 11/07/2012
  SMBIOS Version 2.7
  Physical memory (RAM) installed 8.00 GB
  7.95 GB total physical memory
  4.66 GB available physical memory
  15.9 GB total virtual memory
  10.8 GB available virtual memory

  I want to add more RAM, preferably another 8 GB (I use the laptop for work in post production, animation, editing the videos etc.). Please could someone advise me:

  WHAT should I buy?

  WHERE I can buy it?

  HOW to add in my laptop / install it?

  I am a complete novice when it comes to laptops!

  Thanks x

  Hello

  Unfortunately, 8Gb is the maximum ram (IE 2 x 4 GB modules) which can be installed in the machine - I have used the same model exactly myself.

  This can also be confirmed on the following link.

  http://www.crucial.com/UK/store/listparts.aspx?model=envy%2017-3002ea & cat = RAM

  Best regards

  DP - K

• HP ENVY 17 Notebook PC: HP recovery discs - are these bootable?

  If I order the recovery disks HP ENVY 17 Notebook PC (by specific product number), would I be able to recover and reinstall Windows 8 Pro in a newly formatted and repartitioned C drive and be able to activate my Windows?

  Thank you

  Rico

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  The support of HP recovery that order you from HP is bootable and will return your computer to a factory State. If the media is going to install Windows 8 Pro is based on the exact specification of your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY 15 Notebook PC: unknown device on PCI Express Root Complex

  Gentlemen.

  Recently bought the HP Envy laptop and upgraded to Windows 10 immediately.

  HP ENVY 15 Notebook PC
  15 - k200na (ENERGY STAR)
  L0C83EA #ABU

  10 64-bit Windows Home

  Device reporting Manager: unknown device on PCI Express Root Complex

  Hardware ID:

  ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  have been unable to solve together searched a lot!

  Can you please help.

  Thank you

  Dave

  Hi, Dave:

  You need this driver...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe