Image cut into separate pieces

No problem if you can write a Javascript script. Second best, however, knows someone who can

Copy & paste the script below into a text editor; save it somewhere as "MakePuzzle.jsx". In the case of doubt: complete instructions on how, where and why can be found on the web of p - p.

Make sure that you have everything what you want Grid-ify - not necessary if your 'image' is an imported bitmap or a single piece of work. Select it, run the script. Enter the number of columns and rows you want to split in and run.

As Monika says, each separate object in your original will be duplicated for every room, so maybe things get a little slow with some complicated stuff.

//DESCRIPTION:Make Puzzle
// A Jongware Script, 6-Oct-2010

rows = prompt ("Number of rows", 5);
cols = prompt ("Number of columns", 5);

cols = Number(cols);
rows = Number(rows);

sel = app.selection[0];

posx = sel.geometricBounds[0];
posy = sel.geometricBounds[3];

width = (sel.geometricBounds[2]-sel.geometricBounds[0])/cols;
height = (sel.geometricBounds[3]-sel.geometricBounds[1])/rows;

for (y=0; y
After running on a file HAVE to chance that I had laying around and, in order of appearance, provided with a drop shadow:
 
         
 
         
 more
 
		 
 Tags: Illustrator
 
         
         
 
          
Similar Questions
 
          
 
            
           
 
		     
Is it possible to use images cut into slices with fluid grids CS6?
 
			 
I have 2 images cut into slices that I use in my page. The site was designed with fluid grids CS6. As soon as the page is rendered more small 1 images contracts while the other remains the same size. Is it possible to make this work or is it just not possible using fluid grids?
			 
It will never work right in fluid networks.  Decide which is more important to you - your concept of design or a sensitive provision.  Unfortunately, responsive web design requires compromises that some designers are not willing to do.  It is certainly not for everyone.
Nancy O.
		   
 
            
           
 
		     
Issue of Satellite A100 - 159 LCD - Photo cut into horizontal pieces
 
			 
Hello
For three days I have very strange problems with the LCD screen on my laptop. Imagine the normal image, cut it into horizontal pieces and place pieces randomly above the other.
This 'strange' combination vertical rolls on the screen. A few minutes later, he stops and the screen shows me a gradient of one color.
With a keyboard shortcut, the laptop is on stand-by. With the power on button, the laptop leaves Eve and the screen working again normally.
It happens once or twice a day...
An external screen works normal, while the LCD is weird, so I guess there is no problem with the graphics card. Can someone explain this strange behavior?
One last thing, this laptop 13 months now, so I guarantee expired :-(.
Thanks in advance,
Jochen
(PS English is not my native language, I apologize for the errors and I still think that Toshiba is the best :-)
			 
Hello Jochen
According to your explanation of the problem it is probably problem with graphics card. Please understand that simply test with special tools can give you a definitive answer. I don't really know what is the best solution.
Try to speak with service and ask how much laptop repair cost.
		   
 
            
           
 
		     
Broken Images cut into slices in DreamWeaver
 
			 
Hello all I do my first: site for my group. I decided to use the slice of photoshops feature to create a menu for the site. I'm pretty sure I did the cutting in full photo shop so I think my problem is in DreamWeaver. When I paste the file *.html sliced in dreamWeaver or I have to paste the code of the image into slices in a table or a liquid breadsticks I get this strange spacing, almost like dreamwever move slices and ruin the image. Here is a link to the image broken into slices. http://tinypic.com/r/2ykauk5/6 . The Image is supposed to be a menu rectangle that changes color from top to bottom with the text slices use links, the black lines you see are split between the text lines, only the white parts should not be there. (wanted to just describe as image hosting site does a very good job keeping the image look great) Any help would be great.
Thank you
John Dullebawn
			 
What is happened is that Photoshop has done it's work too well by cutting the images, then creating cells of table of the exact height & width to hold these slices and nothing more.  The layout collapses when you try to change it in DW.  Basically, this approach is OK for quick comps to show a client, but it won't work on real websites. The code generated by the graphics applications is too crappy by other means: lack of types of doc, bloating scripts, spacer.gifs, etc...  It is bad.
You would do well to Dreamweaver for a few days and start to learn the basics of HTML & CSS first.  This will make working with DW much easier.
Finally, image based menus suck for a lot of reasons, not the least of which is having to re - design all new images every time you want to update your menus.  Using the menus CSS style is much better because you can quickly change in DW.
Some links to help you get started:
http://w3schools.com/
http://www.html.NET/
CSS & Jquery Rollover Menus
http://users.TPG.com.au/j_birch/plugins/SUPERFISH/#examples
Good luck!
Nancy O.
		   
 
            
           
 
		     
Can not change the text because of letters being cut into several pieces.
 
			 
I use Adobe Illustrator CS5.1 in Windows 7. I'm trying to enter-set a file and some lines of text are not editable on a regular basis. When you select a letter, it is cut in a bunch of small images, making it impossible to change the font. The customer wants the title on their business card for United Nations in bold, and I'm unable to change the title. How can I release the return type of an editable form?
Thank you
Sin.
			 
I do not know what type of objects you have in your file, but you can give it a shot with the color of the background on the text object. Keep in mind even if it can work for you is not the way type is designed for a thinner font. So, the quality of the design may not be up to a professional level.
		   
 
            
           
 
		     
How can you save images cut into slices?
 
			 
I cut out my computer for web design in different images that I want to insert in DW. I can't understand how to record individual images.
			 
File - Save For Web & Devices, and then click the [Save] button at the bottom.   You will see a few options in the dialog box that appears.
-Christmas
		   
 
            
           
 
		     
dissection of an image into several pieces at a time
 
			 
Hello forumers.
I'd like know if I can dissect a picture into several pieces at a time, as in illustrator I can use the tool.ive pathfinder makes a picture with a box
and as you can see there the lines guides, is there a command in the ps that can make guidelines dissect the image? I know that the guidelines
can turn into a slice, but it's for the web if im not wrong.
Thank you.
			 
Unfortunately, Photoshop doesn't have a pathfinder in Illustrator.
To break an image (for example: shattered glass), I
make a selection (from paths, or channels or layer masks)
Order J float a copy of this layer
back to my original layer, make a new selection and repeat this operation as many times as necessary.
Alien Skin Software has a few effects plug-in to do this, but I usually like manually create effects to have a more personal rather than watching canned.
		   
 
            
           
 
		     
Divide a large TDMS file into smaller pieces
 
			 
Hello
I'm dealing with a large dataset (5.6 GB) TDMS and wish to perform analyses on this subject in MATLAB. Of course, dealing with this large dataset at once would be impossible in MATLAB, so I need to divide it into smaller pieces.
I started playing with Diadem to achieve this. I would like to create an automated script that I may need to do this several times in the future. I'm new to VBS but have managed to extract a small amount of data from the data portal and store it in a table. I was wondering how I can then write this data in a file separate from PDM. My amateur code is attached!
Thanks in advance for any help,
Matt
			 
Hi Matt,
The best way to do is to apply the filter lines you want during the import process, so that you get only the elements of the array that you are interested in as new channels in the data portal - you can do it with the DataFileLoadRed() command.  Then, you can simply save the subset values you wanted (all the content of each channel) to the new export file, which could be a much smaller file of PDM or even a *.mat file if you downloaded and installed the MATLAB use we post free at www.ni.com/dataplugins.
Brad Turpin
Tiara Product Support Engineer
National Instruments
		   
 
            
           
 
		     
video cut into sections
 
			 
There seems to be no have three methods for recording video on the computer.
1. connect the camcorder and navigate to the folder that contains the video and copy it and paste it into the computer. The problem is, the video is cut into short segments and they don't come together flawlessly when they are imported into Movie Maker.
2. remove the SD card in the camera and plug it into the computer. The same problem.
3. use the software supplied with the camcorder to import the video. In this case it is not chop her upward. However, it only allows me to export the video with an extension of file owner. There is no way for me to turn it into a MP4 or anything that can play any other software.  Also, it compresses the file and reduces the quality of it. This is totally unacceptable.
What I want is to be able to take a video, upload them to my computer, edit and share. I want to edit video professionally. I will not be limited to the supplied software editing features. I want windows to be able to play. I also want my mac to play because I use imovie. The seller told me that this computer is compatible with mac. I just roll with it and spend hours to convert the types of files to get more files on my Mac, but this isn't an option. There is no way to do little matter how long I am willing to spend.
Am I missing something?
SOLUTION:
Here is a review for the future reader:
Problem 1: Video files download from the camcorder or a SD card to the Windows computer as to cut off shorts.
Problem 2: Mac is not 'see' the camcorder.
Solution:
STEP 1: transfer the whole BDMV to the camcorder or SD card on an external drive through the Windows computer.
STEP 2: Import through the software edition that you want to use. (In this case, iMovie)  I did point iMovie to import from the external drive and it imported all it detected as a movie.  It's good to anticipate, because it took a long time and it has imported more movies than what I'm trying to change. But it works!
			 
I'm sorry for the confusion.  I imported AVCHD files directly into iMovie 10.1 without converting them to another format first.  I mentioned VideoStudio X 8 as a Windows program that allows you to edit directly without having to convert the video first.
If you want to edit with iMovie, and you have version 10.1, then you should not need to convert AVCHD files to another format before editing it.  I understand not wanting to spend money while you should be able to manipulate the files.  I have a MacBook Pro (late 2011) and used iMovie to import the AVCHD file.
A difference I saw between the Mac and the PC, is that the PC shows the files when you import clips separate way with the. Extension of the MTS and the Mac, importing into iMovie, displayed as a single file AVCHD clips.
When I copied the files to the SD card on the Mac, I copied the entire BDMV folder and then imported the clips in the stream folder.
Just out of curiosity, what version of OS X are you using?
		   
 
            
           
 
		     
split a string into separate variables
 
			 
Suppose I have a procedure that returns the following for the parameter,
V_STR: = ' 10077500733 | 10077500733 | 14/04/2015 | Τ | AJ240557 | 2012 | GREECE | GR | MAN | 00108337640 | CLARKSON | DAVID"
How to cut this string into separate variables?
for example v1 = 10077500733
v3 = 14/04/2015
v4 = null;
Thank you
			 
with qry (STR) as)
Select ' 10077500733 | 10077500733 | 14/04/2015 | T | AJ240557 | 2012 | GREECE | GR | MAN | 00108337640 | CLARKSON | DAVID' the double
)
Select the level,
RTrim (regexp_substr (str, ' [^ |] *(.| $) ', 1, level), ' |') ASPLIT
of qry
connect by level<= length="" (regexp_replace="" (str,="" '[^|]+'))="" +="">



LEVEL
ASPLIT


1
'10077500733'


2
'10077500733'


3
April 14, 2015"


4



5
' T '


6
'AJ240557 '.


7
'2012 '.


8
"GREECE".


9
"GR".


10
"THE MAN".


11
'00108337640'


12
"CLARKSON."


13
"DAVID."


		   
 
            
           
 
		     
Download El Capitan into small pieces?
 
			 
My data plan allows only 800 MB per day.
Can I download El Capitan into small pieces for several days, or need to download in a 6 GB file?
			 
N ° Apple does not split files into small pieces, you can go back. Why not visit the local Apple retailer/dealer and ask them to allow you to make a copy of the file. Don't forget to put a 16 GB USB stick with you that has been partitioned and formatted for Mac. Or you can ask a friend with a best data plan.
		   
 
            
           
 
		     
I have a DAQ Assistant configured to read several channels at the same time. When I have a graphical indicator of wire to the output, I see all my signals mixed together. How I divided them into separate signals?
 
			 
I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?
When I wire any type of indicator, it is show that a release of a single channel.
I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?
I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.
Thanks in advance.
			 
Yes you are right. I tried, but I don't have the result.
I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.
Thank you
		   
 
            
           
 
		     
After that the threshold.vi, GRAYSCALE U8 type IMAQ image turns into a completely black image.
 
			 
I want a threshold, the image of u8 after equalize.vi, but the result is the image turns into an image.before completely black equalize.vi, i use histogram.vi and the interval is (0,0) .where is evil? I really appreciate your help.
			 
Unless you enter a value in the entry 'Replace the value' threshold IMAQ, your output pixel values will be 0 and 1.  In a grayscale image, you will not be able to see anything.  Try to define the 'replace' value to 255 and see if the data appears.  Here's a note from the help file on this function.
Note  Use a binary palette when you see an image that a threshold was applied in mode replace. However, what range to use for viewing depends on the replacementvalue. For example, viewing a picture of threshold could be achieved with a palette of gray. However, in this case, please use a replacement value of 255 (white) to better see image of threshold.
		   
 
            
           
 
		     
Video playback is divided into 4 pieces and is black and white
 
			 
Video playback is divided into 4 pieces and is black and white HELP!
			 
Hello
1. you play the videos online? If Yes, what browser you are using?
2. If you play the video with Windows media player, which is the version of Windows media player you are using?
3. who is the operating system installed on the computer?
4. If you play the video with Windows Media player, what is the format of these files?
Please answer us with more information about the issue to help you.
If you use Internet Explorer refer to this link: solving video problems when you use Internet Explorer
http://support.Microsoft.com/kb/2532294
If you use Windows Media Player to refer to this link: Fix Windows Media Player video and other media or questions Library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
I hope this helps!
		   
 
            
           
 
		     
I recently installed Extended CS6. I shoot always believed. I am trying to open a file in bridge. It dowloads the folder but do not open in bridge or CS6 th eimages, but they open into 12 pieces. My Raw Converter is 7. I HAV etried to day drinking
 
			 
I recently installed Extended CS6. I shoot always believed. I am trying to open a file in bridge. It dowloads the folder but do not open in bridge or CS6 th eimages, but they open into 12 pieces. My Raw Converter is 7. I HAV etried to update, but I can't. I did not have this problem before since the installation of the extended version of CS6
			 
CS6 current versions are perpetual Mac version 10.0.6 version 13.0.1.3 Windows and Mac and Windows version 13.1.2 subscription.  The current version of ACR for CS6 is ACR 9.0 latest ACR has however are not active in any version of CS6.  Brand new available in CS6 camera support.    If you can not CS6 update to the current version of your system you need to fix this problem.
Photoshop: Basic troubleshooting steps for solving problems more
Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
Download the CS6 products