Image is changed to output

Similar Questions

• CS6 Illustrator - How can I change the output settings?

  Hi, its really annoying that I can not change the output settings when I save for the web, something. I just mean Illustrator I want to create a new folder images whenever I have save something, and I don't want to add a _N at the end of the file name...

  Is there a way to change this?, I couldn't find it.

  Thank you.

  This feature has been removed from CS6:

  

  Quoted from this employee Adobe blog post on the new CS6 save for Web feature:

  The output, used parameters dialog box for formatting HTML file control, naming slice and manipulation of background image, has been removed.

  I didn't chance to find a workaround, but I'll keep poking around.

• changes in output when the input is constant

  Hello

  I'm probably being a jerk, but until someone can show me how then I'm a bit confused.

  I have a loop iteration in a VI. The entries to the loop are commands of the Panel before, but even when the input values do not change, the output only.

  It's good to start with (illustrated exit on stays of XY graph top of page even), but after the integration stage, the output displayed on the graph of the low XY continues to increase indefinitely.

  The offset increases whenever the While loop runs (you can increase the time of scanning or the sampling frequency to see when it is run).

  If someone could point me in the right direction, I would be very grateful.

  Thank you

  Ian Haigh

  (running LV 2010)

  I understood what was the real problem: you need to re initialize the integral when the values back to zero. See below:

  

• How can I change the output of the old number in our HP officejet 5500series phone?

  I have a new phone number.  How can I change the output of the old number in our HP officejet 5500series phone?

  Hi Edward,.

  Please contact HP technical support at the: http://www8.hp.com/us/en/support-drivers.html for assistance.

  Good luck!

• You cannot change the output type and format in the page requests system - PeopleSoft process

  Hi all

  When I navigate to the PeopleSoft process scheduler page and try to run a process I see the output type and format web and txt only. I am unable to change the output type and format. All formats and types of output are marked as active in the system settings page. I'm super user of the system as well. I have as well the role of Admin ProcessScheduler. I would like to know if someone has already faced similar problems.

  Thank you

  Vimal

  

  Run the following SQL query to your OPRID:

  SELECT A.CLASSID, PSPRCSPRFL A.OVRDOUTDEST, PSOPRDEFN B WHERE B.PRCSPRFLCLS = A.CLASSID AND B.OPRID = '';

  Make sure that OVRDOUTDEST = 1.

  If it's 0 then you have to fix your configuration profile of the process as follows:

  -Main menu > PeopleTools > Security > list permission > CLASSID research (white list) back to top query

  -Go to the process tab

  

  -Click on "process the profile permissions

  

  S ' ensure that 'substitute an output Destination' is checked. Click OK, and then save.

  

  This should solve your problem.

• Image theme change: Please help

  Hi, everybody, this may seem a simple operation but I tried several times and did not change a theme image (the little icon to the left with the title of the URL), see the icon 'B'.

  1. I went to the theme change theme 101, the last section is 'use a custom image', I changed it to mine and the pages still use the 'B' icon

  2. I find the icon ' bootstrap - icon.png "and replaced it with my image with the same name, still no change

  I missed something obvious?

  * you have forgotten versions: Apex 4.2.6 on Oracle DB 11.2

  Any suggestions are greatly appreciated

  seanzh wrote:

  Hi, everybody, this may seem a simple operation but I tried several times and did not change a theme image (the little icon to the left with the title of the URL), see the icon 'B'.

  1. I went to the theme change theme 101, the last section is 'use a custom image', I changed it to mine and the pages still use the 'B' icon

  2. I find the icon ' bootstrap - icon.png "and replaced it with my image with the same name, still no change

  No wonder that it does not work as the two are not connected somehow.

  A custom Image theme appears in the display of the icon of the page of the theme of shared components.

  The small picture in the browser's address bar is a favicon, which can be implemented in the APEX page template.

  Create icon in ICO format image, upload it to your image folder or the APEX repository and add

  in the element of the required page templates, change the href URL for your applications.

  If you have only a single application / want the same icon for all your applications and you have access to the folder root of your site, you can simply locate the favicon.ico in the folder root without add link shortcut for page templates icon.

• You cannot change the output folder

  I use Adobe Acrobat 8 installed on a Windows 7 system.

  I'm editing Adobe PDF output folder by using the following steps:

  • Open Control Panel.
  • Go to devices and printers.
  • Right click 'Adobe PDF' and select 'Printing Preferences '.
  • Change "folder of output Adobe PDF' by clicking on 'Browse' then selecting folder on the local drive.
  • Click OK.

  Whenever I have change the output folder then reopen the PDF Adobe Print Options dialog box, the default output folder setting is back.

  Please notify.

  Thank you

  Chris

  Hey Chris,

  Please try and find a similar folder under "HKLM\SOFTWARE" or check all the folders it contains, where you can find "Adobe" & then follow the same steps.

  Kind regards

  Nicos

• I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPEN IT AND PUT AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL ERRACER OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPENED IT AND PUT IN AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL GUM OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  Hello

  You are probably using the Quick - switch to Expert mode at the top. All the tools are only available in Expert mode.

  Brian

• How can you use a single image and change it in three different ways to export later?

  I am a new user of Lightroom 3.  How to use the same image and change several ways to produce multiple images of later export?  For example, I have a photo of a bride and groom.  I want to use this image and create a color image, a black and white image and end up with their hands.

  No, you can add them at any time.

• MAX cannot image format u16 error output 0xBFF69037

  I have a GC660m AVT Prosilica, and when you select the pixel format 'mono12' type of output image can be I16. Since this is a 12-bit camera, it does not really matter. But I still wonder why MAX can't output format U16 images? The error code indicates "No decoder available for the selected pixel format", which seems to indicate a software problem. It's MAX? I use LV 2013, MAX 5.5.0.

  Thank you

  Hey Ishi,

  You can get images of U16 of IMAQdx. The only problem is that it is not integrated with the new "Output Type" attribute that has been recently added to IMAQdx. This is because the change in I16/U16 was designed a long time ago and continues to be carried out by a slightly different mechanism. To obtain images of U16 you would keep the output type as I16/Auto and then go to-> show all attributes, the attributes of camera-> Acquisition attributes-> Pixel Signedness and change 'Auto' to 'Unsigned '. By default, IMAQdx can't always gives than i16 images automatically because very few cameras use the full range and 16-bit in the Vision libraries image U16's a little improved, there is still not universal support as it is for I16. We have a problem open, created to allow the output Type change the signedness directly that you expect.

• Images of poor quality output of HTML5 reference page

  I was struggling with quality results look bad for all of my graphics stored in my reference pages when publishing in html5 or other digital format.

  Here are the details:

  • I have several pictures svg of high quality that are stored in my automatic placement reference pages above and below paragraphs.
  • These images are great on the screen and in the pdf output
  • All the options have been correctly resolved output to publish (outputs-> optimization - convert SVG to Raster Image not selected, Style mapping-> Distiller settings-use Image to generate the picture off, default format)
  • I tried to change the default dimensions to 0, 0 - no change
  • FrameMaker converts all svg files that are incorporated in the reference pages for the horrible quality jpeg images
  • If I copy and paste images of the referring page to a page of body, everything works correctly (the exit is a good quality svg)
  • Text in the pages of reference is also blurred images and bad quality jpeg

  Is there a way for Framemaker to output svg images on the pages of reference true svg image or am I out of luck?

  > Would it not possible to use a temporary workaround for:
  > usage directly on the body of the page

  No doubt like imported by reference in anchored frames. Which, of course, cannot be easily imitated if implementation of p has been via FrameAbove, as the FM has no anchor frame position choice for AboveCurrentLine (despite people asking for it for a quarter of century).

  > This is a huge setback for my project and I do not know how to proceed.

  What is the format of output delivery? If it is a plain text, like HTML5 or XML format, I would seriously consider writing a script to use towards the end of workflow to replace some garbage raster Adobe generates with the original SVG. Because these images appear to be signs of reprimand reviews and security, there are probably a very small number of identical data models to find and replace.

  > Is there any hope of it being fixed in the near future?

  I don't remember see Adobe is committed to such a thing in this forum, which is understandable for many reasons. Saw how long it took them to support this pass through preservation as SVG actually works (compared to when import SVG was first took over, and it was years), I'd start to immediately implement a Plan B and maybe a Plan C.

• Satellite P300D - no image through S-video output

  Hello!

  I can't image through my S-video output to the TV. VGA and HDMI works fine, but my TV is old and I don't have that kind of input to TV.
  The laptop recognizes TV on cable, but I can't go from a primary and secondary display.

  (satellite P300D - 12L)

  Hi bgjerg,

  Usually you can pass to your TV by using the FN + F5 key combination.
  More if you use the S-video output, you can set parameters in the display driver. There, you can choose between NTSC and PAL. It s on your TV depending on what setting you need.

  Check this box!

• Satellite 4080 Xcdt, small image after changing the resolution to 800 x 600

  Hello.
  After changing the resolution to 800 x 600 or less (while playing an older game BACK), the screen is reduced to the size of the postcard.
  Someone at - it an idea to solve this problem, (another driver display or s.th.)?

  Greetings, r.

  Hi Ralf,.

  In my view, there is a setting in the BIOS to force the screen image to stretch to fit the available space.

  Kind regards

• Resolution of the image has changed after the calibration of the image

  Hi all

  I put my webcam resolution up to 1280 x 720, but after the Calibration of the Image, the video changed to 1364 x 730.

  This affects at the coordinate of filtering? It is very important in my application.

  BTW, Pattern Matching 4, there is an exit of matches (real world), how to give him information to translate from pixel in mm? Currently I use corresponding pixel and use a few calculations to translate correspondence in mm. And where is the origin of the actual coordinates? It is also in the upper left corner as pixel coordinates?

  Hello

  You can try using the "IMAQ convert Pixel to Real World VI" to transform the coordinates of the pixel to the real world coordinates.

  Best regards.

  Daniel.

• Keithley 2400 smooth change of output range

  Hello

  I use a Keithley 2400 current source to drive a Peltier module to control the temperature (object multilayer temperature shielded inside a vacuum chamber) with PID. The process value (PV) is measured with a Keithley connected to a balanced special bridge thermistor nanovoltmeter. With this configuration, I can hit gap type of 2-3 nanoV of the thermistor bridge exit, which is about the level accessible with this nanovoltmeter (equivalent to ~ 30 nanokelvins stability of temperature, sensor has a sensitivity 0.1 V/k). If this configuration works as it should, with a correctly tuned PID control.

  However, after the sample (degassing vacuum) the charge of process change is different, so the Keithley is started automatically in the range of 1 a output. The LabVIEW application automatically checks the application of the PID output using a buffer and min/max for the calculation of the output values. When, for example after a few hours, demand for PID output drops below 10 mA, the VI automatically changing the flow of the Keithley to 10 range my (using the * command RCL remembered probably setting). So we have a upper stage resolution in order to achieve the extreme temperature stability. The only problem is that the current real offsets (lets call it error output, or a working of error) are obviously different 1A and 1 my range. So this automatic transition is not "smooth" enough, I see that the PID regulation loses its 'hold' on the control and the value of process allows a small swing. Of course, this oscillation is reduced after a while, and the PID can reach ultimate stability after a few hours more.

  I would avoid this "lump" in my will, what would you advice to do? How could I make this transition from the beach to be smoother?

  Thanks for any advice,

  Best regards

  its that darn * RCL

  The Kiethley has the beach there is no reason to recall a series of parameters to change 1 command parameter.

  That being said. The resolution will also change and there will be a bump - it's inevitable.