Image layer not be created properly.

Similar Questions

• I have photoshop cs2. I would like to add or insert a jpg or gif image/image layer in photoshop created with the "Rounded Rectangle tool. How would I do that?

  

  The background photo/image is a layer

  I would like to add the image/photo of this layer to the white layer that has been created with the tool "rounded rectangle", and then delete the background layer and you end up with an image/icon with corners rounded

  Turn on your background layer to a regular layer by double clicking on the thumbnail in the layers palette.

  Then add a vector mask to the layer by going to layer > vector mask > reveal all the

  Then set the Rectangle rounded to path tool and draw your Rectangle on the vector mask.

• Table of contents not be created properly

  The table of contents does not correctly render levels.

  My second level is made before the first. Why this might be happening?

  I forgot something? If this isn't a bug... then I'm completely preplexed.

  I created TOC of hundreds of times and I've never run into this issue.

  Popular ideas.

  

  Levels does not actually get used to sort the table of contents, unless you sort alphabetically. If sorting by page, the usual cause of things ouot of order is implemented. ID search for images containing paragraphs to be included from the upper left, then down, then up opt to move to the right and down again once, so a framework that is more to the left, even if low on the page, is first.

• I noticed that some jpeg (RGB) images are not display in Internet Explorer 11, but they present very well in other browsers. In addition, the images used to display properly in Internet Explorer. No idea what is happening?

  I noticed that some jpeg images are not display in Internet Explorer 11, but they display well in other browsers. I checked they are RGB images, because apparently some people accidentally use the CMYK format. IE is configured to display the images - I checked that also. The images used to display properly in Internet Explorer, and the images have not been changed on the server. The content was created using Dreamweaver CS6 and Photoshop CS6.

  I tried to view the page on other computers running IE, and they also have this problem.

  Any idea of what could be causing this to happen?

  Thanks for looking in this people!

  I discovered that prevented a few images to display in IE 11, while other images show. The culprit was Adblock Plus for Internet Explorer. Once, I disabled the software Adblock Plus missing images showed once again. Interestingly, I discovered that I could cause the same effect in other browsers using Adblock software. There is either a bug in the software of Adblock, or fluid network of Adobe system, which caused some legitimate images should be blocked. Whatever it is, they do not play well together right now. All images are stored on the same domain, and none of them related off site, so it's pretty weird that they have been blocked...

  Anyway, the mystery is solved! I know people like to see a conclusion to these things as much as possible, so I'll mark this as resolved issue.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• When I open Photoshop CS6, the image does not appear in Photoshop. The image IS open, i.e. the name of the file is displayed on a tab and the image layers appear in the layer panel. What is going on?

  Photoshop and Bridge is open as usual. But when I open an image, the image does not show in the area of the image. The image filename is show in a tab and the spectacle of layers in the Panel layer. What is happening and how to fix this.

  I solved the problem. It was somehow connected to my using Microsoft

  photos of theme. I put Windows to use the basic theme and the problem

  went. Thanks for the suggestions.

  HA!

• Adobe AIR - creates disk image does not open

  Hi, I am trying to create a dmg file and does not open the image file. I work on a Mac and it's not the first time that I do this.

  The error message when I open the disk image is "Suite of disk image can not be opened" and the reason "not recognized".

  It's really weird, because it used to work and now for some reason any ceased. First I thought that it could be, because I compiled with the new SDK 4.0, but then I tested it with older SDK as 3.5, 3.8 and 3.9 and the problem persists. Old projects that worked fine also are no more building disk images.

  My system was 10.8 and I thought that the problem could disappear if I install the new Mavs, but after upgrading the problem is still there.

  Repair disk permissions and the file did not help also.

  Anyone has any idea what it could be? I'm really at the end of my knowledge.

  Thank you very much

  Solano

  OK people, finally found the problem. I use FDT and for some reason, FDT stopped to add the indicator -target native when compiling a native installer. I think that certain day FDT introduced this bug.

• IDML files created in InDesign CC images does not work in InDesign CS5.5

  I received an INDD file someone created using InDesign CS5.5.  The file contains text and images.  I made a few changes to the text in InDesign CC and sent it to the user of InDesign CS5.5 IDML format.  When they opened the file, the text changes are visible to them, but images that were in the original file from CS5.5 were missing.  I don't have the original images contained in the document that the user CS5.5 sent only the INDD file.

  Is it possible that I can update the INDD file and deliver an IDML file without alteration of the images?  As I'm typing my situation out in this post, I was wondering if I need to the original images, despite the fact that the document was created by the user CS5.5.

  Any input you can provide will be greatly apreciated.  Thank you.

  IDML never contains images. It contains references to the images.

  The images are not changed. The person who sent you the file to rebuild images in the InDesign file in the links Panel.

• Optimization of 2D image is not refresh properly

  I have an application that displays an image in a 2D image indicator and draws a few rectangles and lines on the top of the image.

  The locations of these lines of change throughout the day, and the application is designed to run reduced and then give a glance at different points of status when it is restored by the user.

  Although reduced, however, the image seems not updated, even if my code is updated once per second. I can't really what happens when it is obviously reduced, but the behavior persists for some time after the window is restored, and is the State that is 'frozen' from the time wherever he played.

  There are other numerical indicators on the front panel is updated in the same loop of 1 Hz, so I know that its just the indicator of 2D image which does not - that is to say, something with LabVIEW or associated system is causing the image that does not refresh while it is reduced and more importantly still, for some time after the application is restored.

  Some things that will cause an update to the image after that I restored to the taskbar to a stale view:

  • Minimize once again, and then restore it again (from the window of LabVIEW)
  • Probe the datapath on the comic for final output to Draw Line that connects to the indicator
  • Wait some time (15 seconds? 30 seconds?)

  I also tried to set the following property without effect node:

  • VI > Panel > be different updates from Control Panel > set to False

  Another way to think about it would be to imagine a picture control 2D with an analog clock, where the lines are drawn to the hour and minutes and updated once per second.  This isn't what I do, but the example is easy to understand.  When the application is restored from the taskbar, the clock appears frozen in time since the last time it has been minimized.

  Same behavior run this in LV 2012 and 2013... I am looking for property nodes or update methods to force a refresh to 1 Hz, without worrying if the display is visible.  The display should be immediately updated when the application is restored by the user.

  Hello m3nth,

  I came across something similar a while back - at the time, I think that I found myself using the (Value) property, which seems to force a refresh.

  Kind regards

• Video images do not scale correctly

  In Firefox video images do not fit properly. This affects both Flash and HTML5 example youtube.com videos videos for example twitch.tv.
  When going to the movies to see in youtube, or close the side panels in contraction, the framework will extend to the left and to the right, leaving black bars on the side, but the video does not fit and the framework does not increase in height.
  I don't have the problem in Mode safe and also not in Chrome. However I still have the problem in Firefox with all extensions disabled. I tried deleting cookies, cache and update of Firefox, but the problem persists. I also tried to disable hardware acceleration in Flash Player and Firefox, but this does not resolve the issue.

  Safe mode also disables userChrome.css and userContent.css. If you have created or any of these files to customize Firefox, you can check if these rules affect video sites.

  Oh, wait, the problem persists even after that you used refresh? That would have removed these customizations. (I assume you have tested before going back to the old settings.)

• Cannot create a backup, error: "a snapshot could not be created."

  Original title: computer backup

  When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?

  Hello

  The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.

  You don't tell us the size of your D: partition.

  There are between 5-15GBs, is the recovery partition and read more:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to save properly:

  If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon

• Try to make the simple disk image layer after doing the double layer image

  Hi all

  I wonder if you can help me.

  I just made an image of DVD double layer of a project and he created a 7 GB file. Now, I would try a simple disc image layer 4.7 GB, something I did with an earlier version of this project, resulting a watchable drive on a smaller TV.

  After 7 GB image, still don't make the 4.7 GB version but I don't understand why.

  Martyn

  Check these 2 things:

  Right click on your 'active' movie and choose "return to the original. This still allows transcode again at a rate less than fit on the smaller disk. Yet fortunately keeps your first version until you tell her to not to do so.

  The tab generate, have you changed the size of the disk (under 'disc info')?

• Error of codec, need images/newspaper notes to the project.

  Right so I have CS6 and that you have successfully updated my first to 6.0.3. I get the error 'sequence a lack of codecs' which is the infestation CS6 users (I've been on a lot of sites/forums through all the patches). I opened the program from Adobe and updated to implement everything. I uninstalled and reinstalled and made the own system as suggested on the Adobe help page several times. I tried to do new projects and then tried re-opening of mine (apparently it has worked for some people). I even made a copy of the project and tried to change the lines of code for the codecs in the sequence of the i-Frame MPEG in AVI. I rebooted my system after each attempt. I can not even open the project.

  I can however make a new project and import ALL of the images. This seems strange to me, but hey, it works. Here's my problem. My producer (the project is a pilot to see the TV) large images/journal notes/color left images encoded for me in the initial project (marking takes good and bad, between b-roll interviews, etc.) I want to be able to access all of these notes, she did this on his machine and I will now change my desktop at home. Is there anyway that I can get the images in my new project to comply with all of these notes?

  I am close to the end of my rope here and time runs out, I'm on a very tight deadline and work as full time another edition of work during the day. Any help on fixing was created so that I can open the original project or move the notes of sequences from one project to the other would be VERY APPRECIATED. Thank you for your time and your help.

  You get properly active PP.

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• Break layer not on the boundary of the cell

  I recently created a double DVD for mastering of glass still CS5 and it's that the Mastering company sent my client"

  Our Premastering Dept gets this message "Break layer not on the boundary of the cell"
  which means that there may be a problem on some players when the dvd goes from layer0 to layer1,
  they can stop for example.
  
  Faced with this risk, we must ask for your approval before go us ahead with production with this teacher,
  or you send us a new master reviewed by your creative studio. "

  Does anyone know how to solve this problem.

  Thank you.
  
  

  Just a quick update on this issue. About two weeks today, I downloaded the ISO image on Aspera site of the replicators and they told me that the same issues exist on this ISO despite the offset of the breaking of the layer to a chapter point using IMGburn. However, they then asked that I present a picture of the RFP. After downloading the image of the RFP, they confirmed that the image of the RFP was good and went ahead with production. So, it seems that the image of the RFP fixed everything despite being created in the same project that has created a problematic DVD image.

  My conclusion in this regard is that ENCORE CS5 can create a double layer image RFP for replication despite the layer break point. I want to suugest that there is no need to consider the powerful use of PGCedit and IMGburn for this reason, but exposure to these products to the point my understanding of creating DVDs in his together.

  Thanks guys who participated in this thread and will be updating you once that the DVD is distributed, because I need to catch an and see where the layer break.

  Nice day!

• Key USB Bootable Bootcamp could not be created

  Hello, I am trying to install windows 10, I downloaded the iso from microsofts website and already got bootcamp on my USB support software, I tried to install windows with iso 10 but it says "Usb bootable stick could not be created" then under it, he says that he only supports versions 7 or later version of windows , so I assumed it was my iso image, so I Re downloaded and it did not work, I did remove and eject my time of mutiple iso image, reboot, I thought maybe I should reinstall bootcamp but know too much what the problem is. Help, please!

  Hello hawkstrattus,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to install Windows 10 on your MacBook Air. From your post, I see you're under OS X Lion mountain. Windows 10 requires OS X Yosemite or later. You can upgrade your software on MacBook Air. The following article contains additional information about the system requirements:

  Use 10 Windows on your Mac with Boot Camp

  Best regards