Table of contents not be created properly

Similar Questions

• Table of contents not showing is not on DVD

  I need to burn a DVD with table of contents. For some reason when I test the DVD on my player, there is no content/menu. I came to chapter markers, so I don't know why they are not transferred to disk. Help, please!

  

  What do you get when you insert the DVD? Is - that the video starts to play automatically instead of the menu?

  Note: you can easily avoid wasting disks DVD sharing on your hard disk instead. This creates a disk image, you can ride as if it were a real DVD by double-clicking it in the Finder.

  In this way, you can test the result in your Mac using a DVD player (even in a Mac without and real DVD player) and you can make adjustments and re-export as many times as necessary. When you are ready, use the Finder to burn multiple copies of the DVD that you want - in El Capitan, just control - click on the disk image file and select burn. [In previous versions of Mac OS X, you should use disk utility to burn DVD discs]

• Dragging several pages of table of contents to about creating automatic hyperlinks

  In my project, I have a few topics that contains hyperlinks to about 10 topics. Now, I drag each page in the table of contents to the topic page create automatic hyperlink. However, I would like to select more than one page in the table of contents and drag both to create both appropriate hyperlinks. This will save my time in the creation of various links.

  Vincent M.

  Hello

  It is not currently possible with RoboHelp. You should consider requesting that he wishes with the form (link below)

  Click here to open the wish form

  See you soon... Rick

• Table of contents: not positioned wrong page numbers

  When I create my "list of Figures" (A Table of contents item type) I get ugly results such as (p83 and p84):

  

  and (p105)

  

  There is not always a dashed line and page numbers are not always end on the right. Is there a way I can influence it?

  I found a solution, less elegant, but it seemed to work in my little test. Add a GREP style to your paragraph to add a character without pause style tab and the number. (This corrects the independent left-aligned numbers).

  

  Then do a search and repalce to add a space before the tabs. The result is far from ideal, because it leaves a space between the text and the leader, but it seems to solve the problems of end of line too tight.

• Tables of contents, not the substitution of character styles applied in chapters

  My table of contents uses not the style of input I select words in the paragraphs that have styles of characters that are applied in the chapter, so some letters, more precisely the parameters, displayed in green, which is well in the chapter but not in the table of contents. I can manually fix this in the table of contents by changing the character to any style after the table of contents was generated, but I don't want to do that. I think it has to happen automatically.

  This should do it:

  (?<=\()[\w, \w)]*(?="">

  It searches the text in parentheses without selecting them.

• Table of contents not applying style does not correctly

  I have an InDesign document of basic test with a "paragraph A Style" applied to a few main headings in the document. I created a "paragraph Style B" separate for the TOC to represent instances of a paragraph Style A. Style is set in 8pt font. Style B is set to 14pt font. When I place the Table of contents in the dialog box, I chose the Style A appear as Style B, but when I actually put the table of contents, it always appears in A Style. Any ideas as to why?

  InDesign CS5 version 7.0

  Windows XP SP3

  Same problem on two different computers (with the same configuration as shown above)

  You might also look to see if you apply a character style to the text.

• Table of content not applying paragraph styles do not

  Hello

  Intensely frustrated, but assuming that I have do just something stupid I can't understand.  I use CS4.

  Try to make a table of contents.  Everything will import correctly in the table of contents - I because of paragraph styles to the different levels, I've wanted to, etc., including some of the hidden layers.  All these import correctly.

  I did the paragraph styles for the real KNOCK out and filled in the box for each to apply to the specifc level.  The basic indentation formatting etc. I am applying work, but features and the font size will not change.

  When I look at each paragraph style, everything entered in the way that I want it to be (that is, text formatting, etc.).  I can go to my OCD manually and click on the section of text and apply the style to the paragraph I want and apply the recesses, etc., but the formatting of the text is not.  I have to go to character styles to make it work.

  If I go into another section of my document, apply that same paragraph text style, then all (characteristics of fonts & renfonçait changes etc.).

  Looks like you can have styles of characters applied to text in the document itself, and these character styles are preserved. Local formatting and character styles applied in the paragraphs are retained when you make the table of contents.

  Many users doesn't seem to understand the distinction between character and paragraph styles, too and using character styles incorrectly. I'm not saying that it's true for you, necessarily, but you should undersand this character styles are used to change the font attributes for bit isolated from the text in a paragraph. The basis for the type specification is part of the paragraph style, and there should be no reason to apply a style of character with the exception of special cases - some words or characters - in the paragraph. Text most will have no style applied character.

• Image layer not be created properly.

  I created a multi layer image that will be used to automatically generate a detailed with static overlays, glow, and drop shadow image. Something is not right. I have a total of 4 layers, 2 are real images, 2 are generated images.

  Order (from top to bottom):

  1. Overlay
  2. Solid color hidden object
  3. Also hidden sized RGBA image
  4. Drop shadow

  The shadow overlay and drop have alpha transparency, the other two are supposed to but something does not work on them. #2 never seems to get alpha so I end up losing #3 and 4.

  I will return to this problem later, the next part, is that even if everything I do is draw the layer pre-created, static and shadow scope, the images are "lost". The correct result should be a white square with a drop shadow, the result is a distorted, chopped up, partially missing a white square with no shadow. A different overlay that has glow is also applied to the shadow of origin, this is like a picture very and hardly anything can be seen with the exception of the shadow.

  The two generated images appear not at all. The first generated image is a Bitmap with alpha that gets put on the scale using the function Bitmap.scaleInto 5.0 running the Lanczos algorithm. This image is hidden that shows only a part of the image. The second generated image is a solid color and generated (fillRect) who has the same masking application made to it. The two appear when drawn individually. They come out like images in white as well.

  I hope you will understand this and I don't confuse you.

  In summary:

  • Something is causing a white drawing/clearing of the background of the image.
  • The image does not appear, so I don't know if the update the scale or masking works.
  • The object of solid color does not appear, so I don't know if masking works.
  • Static images get serverly distorted and messed up.
  • All images are (supposed) to have the alpha value and the resulting image should have transperency.
  • All have been tests with the Eclipse plugin 1.2, component Pack 5.0.0.25, on the Storm 9550 Simulator (with code very useful hot swapping).

  OK last issues resolved. Initially, I tried to make a manual loop to hide the images but thought it would take too much time

  I thought because of the permeable white background problem that it didn't work. I also thought about this loop has been the cause of the white background so I started looking for an alternative, see rop and gave it a try. Who did not much matter what I did, so I worked on static images.

  I am of those who work, I realized that rop was working, but not in the way I wanted to. So I went back to the loop and that worked.

• RoboHelp 2015 (12.0.2.384): The search returns topics do not are included in the table of contents

  ENVIRONMENT: Windows 7 Enterprise SP1, 8.00 GB of RAM, 64 - bit OS, Office 2010, Adobe Acrobat X Pro, Acrobat Reader DC 2015.017.20050

  DESCRIPTION OF THE PROJECT:

  • A single RoboHelp HTML project with three exits. One of the outputs is a 'validation' reference that has its own Table of contents.
  • Validation reference Table of contents contains a subset of the subjects in the main help system. For example, the help system main table of contents contains a folder named 'Administration '. This folder is not in the table of contents of reference for Validation.
  • The reference of Validation is displayed on a public web site. Therefore, we applied the tag "Non_public_info" contained in the topics shared that we do not want to appear on the public website.
  • WebHelp parameters are:
    • Validation reference TOC
    • No map file, no sequence to browse
    • Conditional compilation expression: NOT_Non_public_info_AND_NOT_StyleGuidelines_AND_NOT_TRP (we keep our Style rules in the project to facilitate access during development. TRP content must be rejected because it was not released.)
    • Exclude non referenced topics of output is selected.
    • Search options. Only 'Show Total number of search results' and 'View AND search Option in outputs' are selected.
  • After generating the WebHelp, we remove the files that we don't want (RoboHelp generates empty folders, even if the files are not in the table of contents.)

  PROBLEM: A search in the help of Validation reference reveals the topics that we think should not be included because the subjects themselves are not in the table of contents of Validation reference. For example, the section "Data quality analysis" is in the main table of contents help, but not in the table of contents of reference for Validation. Therefore, we do not expect the topic appears in the search results pane at all. But he does. When the user clicks on the subject, the "Resource not found" message appears.

  Nothing shows the topic Style_Guidelines because the StyleGuidelines label conditional construction applies to the entire folder and the "Style guidelines" book in the main table of contents. (Same thing for the TRP folder).

  QUESTION: Why are topics which are not in the table of contents and whose records are not in the project at all appearing in the WebHelp during a search? We need to rewrite the expression of conditional compilation or establish conditions differently. We assume not have topics in the table of contents, not including the topics not referenced in the output, and remove empty folders would be the way to go. Any help is welcome!

  Thank you very much.

  Carol Levie

  The table of contents does not control what ends up in the output for output online. All content tagged and tagged content which is not excluded by the expression of construction will be included. The parameter 'Exclude topics not referenced output' more exclude all subjects which are not in the table of contents AND are not related to any topic which is included in the output.

  On the other hand, for the print output the table of contents control which is found in the output. I think that it will fire a lot of people.

  If you generate the help and that you do not remove the unwanted files, do you still have the error? If this isn't the case, you know that the topic is referenced somewhere in the content of the reference of the Validation.

  Here is the help of RH11. I can't imagine it would have changed, but you could do a search to verify a second time for RH2015.

  Exclude output not referenced topics

  Select this option to exclude any topic that exists in the project, but is not the default theme in page layout or is not referenced table of selected contents, index or sequence to browse, or any referenced subject.

  Note: RoboHelp shows the topics not referenced that are excluded from the output in the output view module.

• Entry entry not added to the automatically generated table of contents

  Using RoboHelp HTML 11.

  I'm linking a Word document into my project and have it automatically create the Table of contents. I create new pages from the Word title 1 and title 2.

  As a general rule, a section in Word will be like this:

  Heading 1

  Body

  Section 1.1

  Body

  Section 1.2

  Body

  In the table of contents, it will create a book labeled "Heading 1" and pages for 1.1 and 1.2 position position. There is no page for heading 1 or the body of the text that goes there.

  I can manually add the title page 1 of the book, but I suspect that I don't have to. Y at - it a setting I use wrong? Or a tip or solution?

  
  Thank you.

  -Shawn

  If you click on the book for heading 1, it go to the right place and show the body of the text?

  Separate headings are created for heading 1, section 1.1. etc., or is - this a topic with the table of contents goes to the required place?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How can I IF NOT EXISTS CREATE Temp table in PLSQL?

  Hello, how I Temp IF NOT EXISTS CREATE table in PLSQL? The following table must be created in the FIRST call inside a recursive function (you will see in QUESTION 2).
  
  QUESTION 1:
  CREATE a TEMPORARY TABLE GLOBAL TmpHierarchyMap
  (
  ID numeric (19.0) NOT NULL,
  ParentId numeric (19.0) NOT NULL,
  ChildId numeric (19.0) NOT NULL,
  ... more...
  () on commit delete rows);
  
  QUESTION 2: How to return a temporary table of a function?
  
  For example, this is how I do at the moment, using the Nested Table.
  
  RUN IMMEDIATELY ' CREATE OR REPLACE TYPE TmpHierarchyMapObjType AS OBJECT
  (
  ID numeric (19.0),.
  ParentId numeric (19.0),.
  ChildId numeric (19.0),.
  ... more...
  ); ';
  
  RUN IMMEDIATELY ' CREATE OR REPLACE TYPE TmpHierarchyMapTableType AS TABLE OF THE TmpHierarchyMapObjType; "
  
  
  FUNCTION to CREATE or REPLACE fnGetParentsTable
  (
  Number to the ObjectId,
  ObjectClassifier varchar2
  )
  RETURN TmpHierarchyMapTableType
  IS
  TmpHierarchyMap TmpHierarchyMapTableType: = TmpHierarchyMapTableType();
  ThisTempId varchar2 (32);
  CURSOR spGetParents_cursor IS
  SELECT
  ID,
  ParentId,
  ChildId,
  ...
  OF TMP_HIERARCHYMAP
  WHERE TempId = ThisTempId;
  BEGIN
  SELECT sys_guid() IN the double ThisTempId;
  
  spRecursiveGetParents (ObjectId, ObjectClassifier, ThisTempId);
  
  FOR oMap in spGetParents_cursor LOOP
  TmpHierarchyMap.Extend ();
  TmpHierarchyMap (TmpHierarchyMap.Count): = TmpHierarchyMapObjType (oMap.Id
  oMap.ParentId
  oMap.ChildId
  ...
  );
  
  
  END LOOP;
  
  DELETE FROM TMP_HIERARCHYMAP WHERE TempId = ThisTempId;
  
  RETURN TmpHierarchyMap;
  
  END fnGetParentsTable;
  
  
  
  QUESTION 3: that the OVERALL word means? I read this temporary table is visible only for a particular database connection/session and are deleted automatically at the end of the session. I can only find this information in a discussion forum, but cannot find it in the doc Oracle, can someone point me in the right direction please?
  
  
  Thank you very much!
  
  REF:
  http://StackOverflow.com/questions/221822/Sybase-developer-asks-how-to-create-a-temporary-table-in-Oracle
  http://www.Oracle-base.com/articles/8i/TemporaryTables.php

  devvvy wrote:
  so if I CREATE a GLOBAL TEMPORARY TABLE twice the second pass of my recursive function what happens then...?

  You do not create it inside your function.

  You create the TWG once on your database outside the service and then just leave it there and use.

  Tables of should not be created and declined in dynamically.

  Only other database such as SQL Server engines use the concept of creation of temporary tables when executing the code. Oracle uses a methodology "create once, use every time that."

• I can't get the page numbers in my table of contents to update when I update the book.

  
  I use Framemaker 11 and I have two tables of contents in my book: one in English and French. Each table of contents to links to various documents in the same book. The reference page for each table of contents is defined and properly displays the positions 1 and 2, I said that it appears, but numbers not updated when the contents of my document files change to another page. I checked the settings of conditional text in my document files; they are correct. When I update the book, I choose to update the numbers, all the cross-references, all text inserts, OLE links, generate a Table of contents, lists, and indexes. What I am doing wrong? Thank you.

  If they are not knocked down, then they are certainly not generated files. See the example in the help of FM11: http://help.adobe.com/en_US/FrameMaker/11.0/Using/images/bk_hier_books.png

  The 'K' is a TOC file that FM recognizes a generated file.

  Because you have created your table of the contents of the French with the help of another structure of the book, you could import reference this TOC file in another file of FM (for example to create an inset text) in the main book you want. However, you need to make updates in two steps. First update the French book to revise the table of contents. Then update the main book to get the rest of the correct pages (and given that the table of french contents are imported by reference, FM always uses the most recent version).

• Pages of table of contents for Mid-topic links (bookmarks)

  ROBOHELP 7
  
  I created a table of contents and selected "Create table of contents pages for Mid-links (bookmarks). The table of contents are created, but all of the bookmarks in the table of contents have underscores_between_every_word instead of the spaces of Word.
  
  Why ROBOHELP uses underscores in place and place spaces of Word for bookmarks? Is there a solution for this?
  
  Thank you!

  Welcome to our community, Jeff

  Bookmarks should contain underscores in order to work properly. However, it's a mystery as to why it will not replace underscores with spaces to add them to the table of contents.

  Fortunately, there is a solution. And the workaround is to manually change the entry of table of contents to make it look as you want.

  See you soon... Rick

• Topics by opening the first occurrence in the table of contents

  Background: I created HTML5 Responsive help using HR 2015 for a web application. I organized the Hep role, then pages with these roles, users can access, and then by the tasks users can perform on this page. In many cases, a subject is listed under multiple roles and reuse and efficiency, I just dragged the same theme in the list of the topic in the table of contents as appropriate.

  I also used the text conditionalized on table of contents by role level. Using the example below, I have conditions for physician, nurse, and Patient, but I don't think that this is part of the issue well. Conditionalized roles were created for filtering purposes.

  Question: I have the overview topics that include hyperlinks to headings in red in the example below for each role. When a user clicks the hyperlink in this topic of presentation, he brings them to the FIRST occurrence of this topic in the table of contents, not the link that is associated with their role. When a user with the role of the Patient is in the topic view of their role and click the hyperlink 'Research for patients', help opens on this subject, but the "Searching for patients" in the topic role of physician in the table of contents on the left is highlighted.  Not a show-stopper, but it is confusing for users.

  Also, we had originally planned to use the filter feature to filter role help topics. When I filter to view only a specific role (nurse) and do the steps above, by clicking on the Preview 'Search for patients' hyperlink opens but there is no highlighting in the table of contents because this first occurrence is hidden in all the subjects physician.

  Note: This problem does not occur when I generate the content as WebHelp.

  What I want to do: When the nurse click on the hyperlink for 'Research for patients' of their overview topic, researching topic of patients is open and the search for patients is highlighted in the table of contents under the nurse, not the first occurrence (doctor).

  Questions: Is this a bug or is it repairable? And is it possible to fix it without creating the specific role of topics such as finding doctors for Patients, nursing research for Patients and so forth? I tried to delete the table of contents and start again, but the problem persists.

  Here is an example:

  Doctor

  Patient portal page

  Overview (contains links to sections below - view patient demograhic data, looking for patients, to renew orders)

  Display of the demographics of the patients

  Looking for patients

  Renewal of prescriptions

  Nurse

  Patient portal page

  Overview (contains links to sections below)

  Display of the demographics of the patients

  Looking for patients

  Display of orders

  Patient

  Patient portal page

  Overview (contains links to sections below)

  Update your demographic data

  Display of your prescrpitions

  My opinion would be that this is the expected behavior. My theory is that there is no information within the syntax of hyperlinks. A hypertext link is encoded such that when you click on it, you are taken to the landing page, as if sending the message "find the page named and post it by the specified parameters. What is happening is that the hyperlink goes to the first instance of the HTML page in your table of contents (.hhc file). There is no intelligence, he doesn't "know" that you are in the doctor or the nurse section - section he knows only that the page specified in the table of contents is listed in the file and thus, it only takes you there. The syntax of hyperlinks don't "know" where you are in the help system.

  I just also wanted to report the fault of strike in the Patient section, look a your orders of your example, assuming that you have copied and pasted into this thread.

• Question about subjects, books and tables of contents

  I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

  It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

  The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

  If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

  P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.