Image masking when using transitions

Similar Questions

• IMAQ Vision: Is not an Image error when using producer/consumer

  Hi any person

  I used the Vision Express to solve the problem of Patern Machine.

  I want to put Assistant and Aquistion in 2 loop parallel. So I used the producer/consumer to transfer data

  After running VI, I pressed the Stop button and I encountered this error

  I think that getting the queue has a problem. I changed Image to Contant control and connect it to the data type of element. I think that this path is correct.

  So, in case of error, it addressed to Coppy IMAQ in Assistant. So I think that I used the Comunication of the queue is not correct.

  How can I solve this problem

  Thank you

  

  You can see more detail in the following video: https://www.youtube.com/watch?v=i6FOQ2jypXc&feature=youtu.be

  Try this:

  

  You should put the image process in the loop of the consumer and release it properly.

• my image quality when using photoshop on my ipad Lossing pro, do you know why? Thank you

  Usually, I imported the image of my Nikon D750 directly into my pro Ipad so I can edit them with Photoshop but at the end, when you try to print my photo the image quality is really bad so I can't print it?

  Any help would be much appreciated.

  Thank you

  Hello gusphotographe and Andrei!

  Unfortunately, the RAW files are not fully supported in Fix or Mix. That's why you can be faced with problems with degradation or trouble to open the images. I know it's frustrating, I apologize for the inconvenience!

  Please let me know if I can help with anything else.

  See you soon!

  -Kathleen

• Weird bugs when using transitions

  I am using a transition to a simple collapse/uncollapse of a component and I get weird questions. The main problem is that whenever the animation ends, it restores the coordinates he began to reason any and I can't figure out how to make it stop. Here is the code I use to animate. Just for reference, the current values of the _openY is - 73 and _closedY is - 13. So once the animation is completed each time he ends up back at-13 for some reason any.

  <s:states>
       <s:State name="closed"/>
       <s:State name="open"/>
  </s:states>
       
  <s:transitions>
            
       <!-- Transitions from the closed to open state, animating it shrinking and the icon rotating to point downwards -->
       <s:Transition fromState="*" toState="open">
            <s:Parallel duration="300">
              <s:Move yFrom="{_closedY}" yTo="{_openY}" target="{this}" />
            </s:Parallel>
       </s:Transition>
            
       <!-- Transitions from the open to closed state, animating it growing and the icon rotating to point upwards -->
       <s:Transition fromState="*" toState="closed">
            <s:Parallel duration="300">
                 <s:Move yFrom="{_openY}" yTo="{_closedY}" target="{this}"/>
            </s:Parallel>
       </s:Transition>
            
  </s:transitions>
  

  If someone an idea how to solve this problem? I hope there's something simple I'm missing here.

  You should not use side-making values such as yFrom/yTo in your transitions, but rather to define these positions in the State values and let the transitions understand them automatically.

  See http://forums.adobe.com/message/3130755#3130755 for an example

• Loss of Image sharpness when using deformation of the puppet

  Hello

  We use puppet warp on images of models recently, we turned and notice that there is a significant loss of sharpness after using the tool. Noticeable particualrly on the faces of the models.

  Could hit the images with sharpening (again), I would like to know if it is common.

  All comments are greatly appreciated.

  Kind regards

  David

  Hello David, welcome to the forum.

  Puppet Warp manipulates an underlying network of the grid of pixels in the image. For this reason, it is best to first duplicate the image and convert layer to smart object.

  You set way strictly and slide the pins to manipulate your image, sharpness tends to not be affected for the areas where the grid is compressed (hurry closer pixels together), but for areas where the grid is stretched, pixel spread and so decreases the resolution.

  Therefore, a strategy to manipulate your image, compression of areas where sharpness is important (detailed areas like the facial features), while stretching the areas where sharpness is not critical (such as areas of out-of-focus background of adjacent low detail to a face).

  Stretching of the grid are possible without significant loss of sharpness, about 3%, but this depends on the resolution of your image file and requires a little experimentation. Puppet Warp is a bit of a blunt tool to resize areas, with fluid being preferable to use the first Warp zones restricted.

• When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

  When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

  I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

• Having a problem with artifacts when using Dip to black transition

  I use Adobe first Pro CC on a Dell XPS 8900 with a NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory. Both in the Editor (with all the rendering) and the final video (which I tried to export in several ways), I get artifacts when using the two Dip to black and chained transitions. I did check the sequence settings to match the original film, as I originally had two cameras (ARRI and XDCAM) images. I get the problem on two types of sequences. I tried to convert the original film in .mp4 using a HD video converter and then re-import it. The problem remains. Then I tried to download sequences of archives on the Adobe site and imported. And I still have the problem. I think that it has something to do with my computer as before to get the XPS 8900 I had used an older Dell model (without graphics acceleration or upgrade) and had not not this problem. You can see artifacts in the video below. Strangely, I don't see any artifacts when I used transitions on the titles of lower third or in transitions from outset between title sequences. It is only when transitions are used on real images (and, again, I tried to use other types of sequences and had the same problem). Any thoughts on how to solve this problem would be greatly appreciated.

  I am simply not see something weird.  The transition is quite fast, however.

  Give that DNxHD export/upload to try.  See if you like better.

• Image mask Error Message When the reduction in size of the PDF

  With my Mac, I include jpg images in Microsoft Word documents, save them as pdf files and reduce them. Reduced size often fails with the error message "The PDF content document image masks which were not sous-échantillonnées".  JPEGs don't have masks, so I have no idea how to solve this problem, and a thorough search of google was no help.

  Use PNG images instead use an application like converter of graphics, Fireworks to convert .png to .jpg.

  Will be much better images that degrade not every time that they are open and more often they end up being of same size as jpeg format

  JPEG unless you save it as a special type is a lossy format, and each time is open (and unzipped) and closed (and then compressed) details of losses

  Just open and enlarge an image jpeg after its been open 5 - 20 times you notice one out of the halo update similar looking for water discharged on paper wil pen ink on this subject. And it get worse gradually. PNG however is not fixed and if the original is saved as png never degrade even when reduced in size or or expand within reasonable limits in size.  I have in dealing with photos screenshots, pictures and others for years. Despite what others may say on this list can say if you want a picture with little bad for years of service save in png.

• How to improve latency when using images high resolution

  I use a lot of images high resolution in my iBook, which creates a lot of lag when using author ibooks.  I have an end of 2015 with skylake processor i7 iMac and a decent amount of video ram.  Is it possible to improve this gap without use the workarounds like spreading the images until the end?  This is a limitation of the application?  I am able to work with images in Lightroom quickly with little or no lag, why I have this experience with ibooks author?

  It was common to use the placeholder images while editing, simply because of the question, you say.

  Regarding the ram, better for computer max (video ram isn't the issue) in all cases, but with the new Macs after having soldered to the ram, which can be difficult to correct after the purchase.

  Shame to see iBA still suffers this awkwardness, but oh well.

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• When I down loaded a file have icon as the sample images I cannot use them separately. The purchased version will allow mw to do?

  When I down loaded a file have icon as the sample images I cannot use them separately. The purchased version will allow mw to do?

  Yes, you should be able to edit it in Adobe Illustrator.

• Colors seem to be desaturated when previewing and working on images in photoshop. Screen also flickering when using tools. Help

  Colors seem to be desaturated when previewing and working on images in photoshop. Screen also flickering when using tools. Help

  For color related issues. Make sure that your monitor is color calibrated.

  Also disable camera raw 'use of the graphics processor.

  Go in Edition > Preferences > Camera Raw

  

  How can I check if my graphics driver is up to date

  Please see how: install and update drivers in Windows 10 - Microsoft Community

  What happens when you switch to the mode Basic Drawing in Photoshop

  Go in Edition > Preferences > Performance > advanced settings and setting mode "drawing" at the base

  

  Concerning

  ~ Assani

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• just upgraded to ch 2014, when using contact sheets and by adjusting the results of font sizes in the spacing between the images bigger and bigger while the size of police remains the same. See you soon,.

  upgrade to ch 2014, when using contact sheets and by adjusting the results of FontSize to spacing between the images grows while the font remains the same size.

  Someone at - it ideas on why this is happening.

  See you soon,.

  PAul

  Hi Paul,.

  There is a bug in the script that affects text attributes. We are now studying.

  In the meantime, xbytor updated the plug contact to work around the problem. You can find it here: ContactSheetX 2.1 released

  Kind regards

  Steve

• In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

  In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

  Too bad...

  Fixed:

  adjustment of projects > switch Renderer.

  Thank you